Only show results in Virginia? Ok

flame detector equipment

  • Premium

    PID Analyzers - Model FI53 - Flame Ionization Detector (FID)

    The flame ionization detector (FID) is used for the selective measurement of any organic species that can be ionized in a flame. This corresponds to most hydrocarbons and is described below: The Model 53 has an FID (burner with HV bias and collector), a power supply for the FID bias, an electrometer and gauges and flow control for the support ...

    By PID Analyzers, LLC. based in Sandwich, MASSACHUSETTS (USA). from Flame Ionization Detector (FID) Product line

  • Premium

    PORTAFID - Model M3K - Portable Flame Ionisation Detector

    Flame ionisation detectors for inspecting underground gas lines. The PORTAFID M3K portable flame ionisation detector is the perfect tool for above-ground inspections of underground gas lines. It is reliable and highly accurate, resistant to interference from moisture and only responds selectively to hydrocarbons. The PORTAFID M3K features an 0.4 l ...

    By Hermann Sewerin GmbH based in Gütersloh, GERMANY. from Portable Flame Ionisation Detector Product line

  • Premium

    PID Analyzers - Model FP56 - Flame Photometric Detector (FPD)

    The flame photometric detector (FPD) is used for the selective measurement of any S or P species that can be burned in a flame to product chemiluminescence. This corresponds to either small molecules like H2S or PH3 or large pesticides containing S or P. The detector is described below: The Model 56 has an FPD (burner), a photomultiplier tube ...

    By PID Analyzers, LLC. based in Sandwich, MASSACHUSETTS (USA). from Flame Photometric Detector (FPD) Product line

  • IPES - Model IR/UV - Flame Detector

    ESP Safety’s Model IPES-IR/UV Flame Detector provides superior sensitivity for fires from oil and petrochemical products. It is also indicated for a wide range of other fire types including metal fires. IPES-IR/UV’s advanced detection technology includes optical filters configured for maximum sensitivity to radiation produced by flame ...

    By ESP Safety, Inc. based in Houston, TEXAS (USA). from Flame Detector Product line

  • IPES - Model UV - Flame Detector

    ESP Safety’s Model IPES-UV Flame Detector is optimally suited for use in detecting fires of metal and pyrophoric materials. It is also ideally suited for areas where modulated infrared radiation may be present, such as hot spots on rotating electrical equipment. IPES-UV’s advanced detection technology ensures rapid flame recognition ...

    By ESP Safety, Inc. based in Houston, TEXAS (USA). from Flame Detector Product line

  • Model FS24X Series - Flame Detector

    Sophisticated software algorithms and dual microprocessors ensure that the Fire Sentry FS24X has the highest fire detection performance combined with optimal false alarm rejection.

    By Honeywell Analytics, Inc. based in Lincolnshire, ILLINOIS (USA). from Flame Detector Product line

  • FlameVision - Model FV400 - Flame Detector

    The FlameVision FV400 Flame Detector uses a Triple IR solar blind technology combined with flame detection algorithms to provide high performance sensing capabilities for hydrocarbon fires. This provides a reliable, cost-effective solution in standard flame detection applications where there is a single hazard in the field of view. This includes ...

    By Tyco Gas & Flame Detection based in The Woodlands, USA. from Flame Detector Product line

  • SharpEye - Model 40/40L-LB UV/IR - Flame Detector

    Model 40/40L (or LB, with Built-in-test option) provides a combination of UV and IR sensors, where the IR sensor operates at a wavelength of 2.5-3.0 µm, and can detect hydrocarbon-based fuel and gas fires, hydroxyl and hydrogen fires, as well as metal and inorganic fires.

    By Spectrex Inc based in Cedar Grove, NEW JERSEY (USA). from Flame Detector Product line

  • SharpEye - Model 40/40L4-L4B UV/IR - Flame Detector

    Model 40/40L4 (& L4B, with Built-in-test option) provides a combination of UV and IR sensors, where the IR sensor operates at a wavelength of 4.5 µm, and can detect hydrocarbon-based fuel and gas fires. The UV/IR flame detector senses radiant energy in the short wave section of both the ultraviolet and infrared portions of the ...

    By Spectrex Inc based in Cedar Grove, NEW JERSEY (USA). from Flame Detector Product line

  • Model FS-18X - Flame Detector

    Multi-Spectrum TriBand™ Fire & Flame Detector - Dual IR + Visible BandsThe FS18X is an advanced technology TriBand™ (IR/IR/Visible) Electro-Optical Flame Detector. High-speed solid-state Quantum sensors deliver fast reliable fire detection for all types of fires with the highest false event immunity. Patented software algorithms ...

    By Sensidyne Industrial Health and Safety based in St. Petersburg, FLORIDA (USA). from Flame Detector Product line

  • Model SS-4 - Flame Detector

    Multi-Spectrum Fire and Flame Detector - UV + IR + Visible Bands

    By Sensidyne Industrial Health and Safety based in St. Petersburg, FLORIDA (USA). from Flame Detector Product line

  • SharpEye - Model 40/40R - Single IR - Flame Detector

    The 40/40R Single IR Flame Detector detects hydrocarbon-based fuel and gas fires using advanced flame analysis tools. The detector provides early warning of flaming fires working at 4.5 μm for maximum sensitivity, and immunity to false alarms from IR sources such as sunlight and IR projectors.

    By Spectrex Inc based in Cedar Grove, NEW JERSEY (USA). from Flame Detector Product line

  • SharpEye - Model 20/20-SI - Flame Detector

    The SharpEye 20/20SI Triple IR (IR3) Flame Detector detects fuel and gas fires at long distances with the highest immunity to false alarms. The SharpEye 20/20I IR3 can detect a 0.1m2 (1ft2) gasoline pan fire at 65m (215ft) in less than 5 seconds. The SharpEye 20/20SI flame detector provides long distance detection along with the highest ...

    By Desu Systems BV based in Berkel en Rodenrijs, NETHERLANDS. from Flame Detector Product line

  • Model IPES IR3 - Flame Detector

    The state-of-the-art multi-spectral infrared technology of ESP Safety’s Model IPES-IR3 Flame Detector affords the highest level of sensitivity in detecting flames from hydrocarbon based liquids and gases within a wide field of view. IPES-IR3’s advanced detection technology ensures rapid alarm signaling, while ...

    By ESP Safety, Inc. based in Houston, TEXAS (USA). from Flame Detector Product line

  • SharpEye - Model 40/40I - Triple IR (IR3) - Flame Detectors

    The SharpEye 40/40I Triple IR (IR3) Flame Detector detects fuel and gas fires at long distances with the highest immunity to false alarms. The 40/40I IR3 can detect a 0.1m2 (1ft2)  gasoline pan fire at 65m (215 ft) in less than 5 seconds. The SharpEye 40/40I is the most durable and weather resistant flame detector currently on the ...

    By Desu Systems BV based in Berkel en Rodenrijs, NETHERLANDS. from Flame Detectors Product line

  • SharpEye - Model 20/20MI - Mini Triple IR (IR3) - Flame Detector

    The 20/20MI is an economical and compact Triple IR (IR3) Flame Detector with the highest immunity to false alarms, in a rugged stainless steel housing.

    By Spectrex Inc based in Cedar Grove, NEW JERSEY (USA). from Flame Detector Product line

  • SharpEye - Model 40/40M Multi IR - Flame Detector

    The 40/40M Multi IR Flame Detector is specifically designed for detection of hydrocarbon and hydrogen flames. It detects hydrocarbon-based fuel and gas fires at long distances with the highest immunity to false alarms. The 40/40M can detect a gasoline pan fire at 215 ft (65m) or a hydrogen flame at 100 ft (30m) in less than 5 seconds.

    By Spectrex Inc based in Cedar Grove, NEW JERSEY (USA). from Flame Detector Product line

  • Forney - Model IDD-II Series - Flame Detector

    The Forney IDD is the most widely used flame detector system in the USA utility market because of its rugged reliability and many years of service. The combination of a compact detector head connected to a remote, highly tunable amplifier provides the operational flexibility that most utilities need. Forney’s IDD-II Series Flame Detector ...

    By Forney Corporation based in Addison, TEXAS (USA). from Flame Detector Product line

  • AutroFlame - Model X33AF - Flame Detector

    AutroSafe IFG includes time-and-cost-saving technologies including SelfVerify and DYFI+. SelfVerify is a self-testing mechanism developed by Autronica in collaboration with BP, Exxon and Total, which increases reliability at the same time as reducing Life Cycle Costs; this success is attested by real-world applications and independent tests. DYFI+ ...

    By Autronica Fire and Security AS based in Trondheim, NORWAY. from Flame Detector Product line

  • SharpEye - Model 20/20ML - Mini UV/IR - Flame Detector

    The low cost 20/20ML UV/IR Flame Detector has a compact, lightweight but rugged design for general purpose (non-Ex approved) areas. It detects hydrocarbon fire at distances up to 50 ft (15 m). The 20/20ML provides a combination of UV and IR sensors and can detect hydrocarbon-based fuel and gas fires, hydroxyl and hydrogen fires, as well as metal ...

    By Spectrex Inc based in Cedar Grove, NEW JERSEY (USA). from Flame Detector Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you