flame ionization detection Equipment available in New York

Available in New York| Near New York
68 Results found

We couldn't find any flame ionization detection equipment in New York

Here is a list of results available in New York

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: flame ionization detection ×

  • Available in: USA ×

  • Available in: New York ×

Pollution - Model Polaris FID - Portable Flame Ionization Detection Analyzer

by Pollution Srl     based in Budrio, ITALY

POLARIS FID is an on-site portable TOC Analyser (Total Hydrocarbon Analyzer) for Stack Emissions in compliance with EN12619, EN13526 and EPA METHOD 25A. Our portable heated FID (flame ionization detection) analyzer is TÜV Rheinald certified. It is a fully portable instrument because it incorporates everything needed for the analysis.

Model CAI 600 Series - M-HFID Total Hydrocarbon/Methane/Non-Methane Hydrocarbon Analyzer

by California Analytical Instruments, Inc. (CAI)     based in Orange, CALIFORNIA (USA)

The California Analytical Instruments’ Model 600 MHFID Analyzer is designed to continuously measure the total concentration of hydrocarbons or methane within a gaseous sample. The analyzers exhibit superior sensitivity and response time. The gaseous sample can be exhaust gases from an internal combustion engine, a combustion process or VOC ...

CAI - Model 600 Series - HFID Hydrocarbon Analyzer

by California Analytical Instruments, Inc. (CAI)     based in Orange, CALIFORNIA (USA)

The California Analytical Instruments Model 600 HFID Analyzers are designed to continuously measure the total concentration of hydrocarbons within a gaseous sample. The analyzers exhibit superior sensitivity and response time. The gaseous sample can be exhaust gases from an internal combustion engine, a combustion process or VOC abatement systems. ...

CAI - Model 600 Series - FID Hydrocarbon Analyzer

by California Analytical Instruments, Inc. (CAI)     based in Orange, CALIFORNIA (USA)

The California Analytical Instruments Model 600 FID Analyzers are designed to continuously measure the total concentration of hydrocarbons within a gaseous sample. The analyzers exhibit superior sensitivity and response time. The gaseous sample can be exhaust gases from an internal combustion engine, a combustion process or VOC abatement systems.

Model 920-226 - Highly sensitive Flame Ionization Detector (FID)

by PEAK Laboratories     based in Mountain View, CALIFORNIA (USA)

The Peak Performer 1 FID uses a highly sensitive Flame Ionization Detector (FID) which has been designed specifically for process applications in UHP gases. The FID is used to measure trace impurities down to part per billion levels, while offering a wide linear range for simple, accurate measurements. The PP1 technology has proven to offer a more ...

Model 920-220 - Highly sensitive Flame Ionization Detector (FID)

by PEAK Laboratories     based in Mountain View, CALIFORNIA (USA)

The Peak Performer 1 FID uses a highly sensitive Flame Ionization Detector (FID) which has been designed specifically for process applications in UHP gases. The FID is used to measure trace impurities down to part per billion levels, while offering a wide linear range for simple, accurate measurements. The PP1 technology has proven to offer a more ...

VIG Industries - Model 200/1 - FID Methane/Non Methane (NMHC) Oven Heated Hydrocarbon Analyzer

by VIG Industries     based in Anaheim, CALIFORNIA (USA)

The VIG Industries, Inc. Model 200/1 is a microprocessor based, oven heated methane / non methane (NMHC) hydrocarbon analyzer for high accuracy, sensitivity and stability. The Model 200/1 measures methane and non methane hydrocarbons at preset intervals. The VIG Model 200/1 uses one(1) Flame Ionization Detector (FID) to obtain methane and ...

VIG Industries - Model 210 - Heated Methane/Ethane/NonMethane-Ethane Total Hydrocarbon Analyzer (NMHC)

by VIG Industries     based in Anaheim, CALIFORNIA (USA)

The VIG Industries, Inc. Model 210 is a microprocessor based, oven heated methane / ethane / non methane-ethane (NMEHC) total hydrocarbon analyzer for high accuracy, sensitivity and stability. The Model 210 measures methane, ethane, non methane-ethane hydrocarbons at preset intervals and continuously measures total hydrocarbons in real time. The ...

VIG Industries - Model 200 FID Dual Channel - Oven Heated Total Hydrocarbon Analyzer

by VIG Industries     based in Anaheim, CALIFORNIA (USA)

The VIG Industries, Inc. Model-200 is a microprocessor based, oven heated methane / non methane / total hydrocarbon gas analyzer designed for high accuracy, sensitivity and stability. The Model-200 uses two independent flame ionization detectors (FID), one to measure total hydrocarbons and the second coupled with a GC (gas chromatography) column ...

Flame Ionization Detectors (FID)

by Joint Analytical Systems Inc     based in Newark, DELAWARE (USA)

In gas chromatographic analyses flame ionization detectors (FID), thermal conductivity detectors (TCD) or mass spectrometers (MSD) are often used for compound detection. In olfactory analysis, the human nose is used as additional detector.  The JAS Olfactometer is a sniff detector for gas chromatography. It allows the operatur to use his ...

SRI - Model FID - Flame Ionization Detector

by SRI Instruments Europe GmbH     based in Bad Honnef, GERMANY

The Flame Ionization Detector is the most commonly used GC detector, responding linearly from its minimum detectable quantity of about 100 picograms to almost 100%.The FID responds to any molecule with a carbonhydrogen bond, but not at all, or poorly, to compounds such as H2S, CCl4, or NH3. The FID response is very stable from day to day, and is ...

VIG Industries - Model 20 - FID Single Channel Oven Heated Total Hydrocarbon Analyzer

by VIG Industries     based in Anaheim, CALIFORNIA (USA)

The VIG Industries, Inc. Model 20 is a microprocessor based, oven heated total hydrocarbon analyzer designed for high accuracy, sensitivity and stability. The Model 20 is designed to continuously measure one point.The Model 20 utilizes a flame ionization detector (FID). The FID, sample filter, all sample lines, solenoid valves, pump head, ...

VIG Industries - Model 20/2 - FID Dual Channel Oven Heated Total Hydrocarbon Analyzer

by VIG Industries     based in Anaheim, CALIFORNIA (USA)

The VIG Industries, Inc. Model 20/2 is a microprocessor based, oven heated total hydrocarbon analyzer for high accuracy, sensitivity and stability. The Model 20/2 is designed to continuously measure two points.The Model 20/2 utilizes two flame ionization detectors (FID). The flame ionization detectors, sample filters, all sample lines, solenoid ...

VIG Industries - Model 10 - FID Single Channel Spot Heated Total Hydrocarbon Analyzer

by VIG Industries     based in Anaheim, CALIFORNIA (USA)

The VIG Industries, Inc. Model 10 is a microprocessor based, spot heated total hydrocarbon gas analyzer designed for high accuracy, sensitivity and stability. The Model 10 uses a flame ionization detector (FID) for continuous measurement of a dry sample stream at ambient temperature. The FID is spot heated to prevent condensation, and to provide ...

VIG Industries - Model 10/2 - FID Dual Channel Spot Heated Total Hydrocarbon Analyzer

by VIG Industries     based in Anaheim, CALIFORNIA (USA)

The VIG Industries, Inc. Model-10/2 is a dual channel, microprocessor based, spot heated total hydrocarbon gas analyzer designed for high accuracy, sensitivity and stability. The Model-10/2 uses two flame ionization detectors (FID) for continuous measurement of two independent dry sample streams at ambient temperature. The FID are spot heated to ...


Chroma CO - Model C11022 - Gas Analyser

by Chromatotec Group     based in Val de Virvée, FRANCE

A gas analyser using flame detection with a catalytic methanator module to analyse CO and CO2 for monitoring gas purity and electronic gas measurement. A 19' inch rack mountable chassis, 4U high. It has the ability to be used as a fully integrated system for automatic sample analysis as well as it is transportable for use at various sites. Our ...

Environnement S.A. - Model HC51M - FID Hydrocarbons Total VOC Analyzer

by Environnement S.A     based in Poissy, FRANCE

FID Hydrocarbon (CH4, HCnm, HCT) Analyzer. Uses the principle of flame ionization detection to measure the concentration of hydrocarbons in the range of 0-1000 ppm.

UniSolv - High purity solvents for Organic Trace Analysis

by Merck Millipore     based in Darmstadt, GERMANY

UniSolv® for Organic Trace Analysis - Large retention time range (even low-boiling substances can be reliably detected) - Highest possible purity and minimal signal-to-noise ratio - Best possible batch consistency avoiding analysis repetition, time and cost saving - Specified for GC-Electron Capture Detector (ECD), GC-Flame Ionization Detector ...

PetroAlert - Model Series 9100 - Online Gas Chromatograph for Hydrocarbon Measurement

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The PetroAlert Series 9100 is designed specifically for the oil and industry.   Incorporating all of the key features of the Series 9100 GC's while providing a FID (Flame Ionization Detector) for extra hydrocarbon sensitivity. Light hydrocarbon analysis, C1 to C5, is completed in 30 seconds while preserving the C1 to C2 separation. ...

HEATH - DetectoPak Infrared (DP-IR)

by Hetek Solutions Inc.     based in London, ONTARIO (CANADA)

The DP-IR is the latest of a new generation of leak survey instruments from Heath that will greatly improve the productivity and safety of a walking/mobile survey. The Detecto Pak-Infrared (DP-IR™) is a highly advanced technology capable of detecting methane without false alarming on other gases.

Need help finding the right suppliers?

Let the XPRTs do the work for you