Only show results available in Connecticut? Ok

flap valve equipment

  • JKF - Flap Valves

    Flap value with conical entry for inserting into the duct.

    By J.K.F. Industrie A/S based in Hadsund, DENMARK. from High-pressure Extraction Product line

  • Penstocks - Flap Valve

    seful as a reflux safety system against overflow.

    By penstocks.de GmbH based in Thierhaupten, GERMANY. from Hydraulic Steel Engineering Product line

  • Model KRK R-O 600-1500 - Flap Valves

    The correct flapvalve can be easily calculated by using an advanced calculation program. Dynamic preconditions play a decisive role, in particular in relation to certain applications as well as static conditions. KWT advises and supplies the correct flapvalve for all applications, regardless of whether they are being used in tidal, pumped or ...

    By KWT Group/ KWT International member of Bergschenhoek Groep based in Biddinghuizen, NETHERLANDS. from Flap Valves Product line

  • MCL - Flap Valves

    This is the most common non-return valve available and is manufactured from HDPE (High Density Polyethylene) with Stainless Steel 316 parts. The construction is lightweight but very robust in its design. It can be mounted to a flat wall or on an angle. It can be suited for mounting onto a PN10 or PN16 flange and can also be spigot mounted using a ...

    By Martin Childs Limited based in Norfolk, UNITED KINGDOM.

  • ACE - Model 100MM - Flap Valves

    Since the introduction of HDPE flap valves by ACE in 1997 the material has become synonymous with high quality, reliable flood defences. Offering extremely good value for money over its life- it’s not just any “plastic” valve it’s an ACE valve! We stock a wide variety flap valve sizes for quick dispatch (100-1000mm) however ...

    By Aquatic Control Engineering Ltd. based in Rampton, UNITED KINGDOM. from Flap Valves - Wall Mounted Product line

  • Model KRK R-O 100-500 - Flap Valves

    The correct flapvalve can be easily calculated by using an advanced calculation program. Dynamic preconditions play a decisive role, in particular in relation to certain applications as well as static conditions. KWT advises and supplies the correct flapvalve for all applications, regardless of whether they are being used in tidal, pumped or ...

    By KWT Group/ KWT International member of Bergschenhoek Groep based in Biddinghuizen, NETHERLANDS. from Flap Valves Product line

  • CMO - Model FL Series - Flap Valve

    Check valve to be installed at the end of pipe. Standard working pressure 2,5 meters. Round, square or rectangular welded construction. Manufacturding materials: carbon steel or stainless steel. Cast iron construction for small sizes. Tightness by EPDM seat. Two types of design are available: Straight seat / straight disk. Inclined seat / straight ...

  • Model KRK-R-F 100-1000 - Flap Valves

    The correct flapvalve can be easily calculated by using an advanced calculation program. Dynamic preconditions play a decisive role, in particular in relation to certain applications as well as static conditions. KWT advises and supplies the correct flapvalve for all applications, regardless of whether they are being used in tidal, pumped or ...

    By KWT Group/ KWT International member of Bergschenhoek Groep based in Biddinghuizen, NETHERLANDS. from Flap Valves Product line

  • Model HDPE - Flap Valves

    Waterfront have designed a range of ‘next generation’ HDPE (High Density Polyethylene) Flap Valves. This range comprises lightweight, corrosion resistant flap valves which act as Non-Return Valves and check valves for the prevention of reverse flows.

    By Waterfront Fluid Controls based in Glasgow, UNITED KINGDOM. from Flap Valves Product line

  • Model KRK-R-OH 100-500 - Flap Valves

    The correct flapvalve can be easily calculated by using an advanced calculation program. Dynamic preconditions play a decisive role, in particular in relation to certain applications as well as static conditions. KWT advises and supplies the correct flapvalve for all applications, regardless of whether they are being used in tidal, pumped or ...

    By KWT Group/ KWT International member of Bergschenhoek Groep based in Biddinghuizen, NETHERLANDS. from Flap Valves Product line

  • Flap Valve

    Flap valves are used for end closure of outfall lines, or in manholes, to prevent entrance of backwater. They swing open under direct pressure to release the outfall fluid and close when direct pressure is relieved. The valve disc is offset from vertical to ensure positive closing.Flap valves are used in filtration and sewage disposal plants and ...

    By M&H Valve Company based in Anniston, ALABAMA (USA). from In Plant Valves Product line

  • Flap Valves

    Flexseal Flap valves are designed to operate under very low heads of water, in gravity flow applications, at ambient conditions between -65° and +85° C.

    By Flexseal Couplings Ltd (Fernco Group) based in Wombwell, UNITED KINGDOM.

  • Model DFL - Flap Valve

    The DFL model FCA flap type damper is designed for pneumatic transport applications and is used to isolate air or industrial gas in combustion and various process lines where temperatures may reach up to 900ºC. It consists of a cylinder shape body and a flap type gate. When the flap comes in contact with the seat that is lodged in the gate, ...

    By FCA Valves based in Ibarra (Guipúzcoa), SPAIN. from Dampers Product line

  • Fabricated Flap Valve

    Available in size range 400mm- 4000mm, for pressure ranges up 4m on seat. Materials of construction Mild steel, Aluminum, plastic, wood, St St 304, 316 & Duplex 2507.

    By Industrial PENSTOCKS ltd based in Dudley, UNITED KINGDOM.

  • Althon - Model 100mm - Tidal Flap Valve

    100mm tidal flap valves are recommended for use below the waterline and in tidal applications for pipework up to 100mm. Our tidal flap valves are typically installed below the normal water level to prevent back flow up a pipe. Althon tidal flap valves are suitable for use with a water pressure of 5 MWC for 72 hours and 1 MWC for 50 years. The flap ...

    By Althon Limited based in Norwich, UNITED KINGDOM. from Flow Control & Flood Prevention - Flap Valves Product line

  • DVA - Diverter Flap Valves

    The DVA Diverter Valve consists of a casing in stainless steel lined with SINT engineering polymer and a flap in SINT® engineering polymer with a steel core. The flap is activated by a manual lever, or by a pneumatic or electric actuator.

    By WAMGROUP S.p.A. based in Ponte Motta/Cavezzo (MO), ITALY. from Valves Product line

  • Althon - Model 700mm - HDPE Flap Valve

    Althon 700mm HDPE flap valves can be used in surface, sewer and water process applications. Our 700mm HDPE flap valves are a simple and highly effective way to prevent water backflow into a system. 700mm HDPE non return flap valves are manufactured in HDPE and stainless steel grade 316L. Althon HDPE flap valves are lightweight and high strength. ...

    By Althon Limited based in Norwich, UNITED KINGDOM. from Flow Control & Flood Prevention - Flap Valves Product line

  • Althon - Model 600mm - HDPE Flap Valves

    Althon 600mm HDPE flap valves can be used in surface, sewer and water process applications. Our 600mm HDPE flap valves are a simple and highly effective way to prevent water backflow into a system. 600mm HDPE non return flap valves are manufactured in HDPE and stainless steel grade 316L. Althon HDPE flap valves are lightweight and high strength. ...

    By Althon Limited based in Norwich, UNITED KINGDOM. from Flow Control & Flood Prevention - Flap Valves Product line

  • Model AS-H - Coplastix Flap Valve

    Alfa Laval AS-H Coplastix Flap Valves are designed for flow control of waste, potable and storm water, hydro, industrial, and sea water. They are used in any application calling for discharge where the prevention of reverse flow back into the line is necessary.

    By Alfa Laval Corporate AB based in Lund, SWEDEN. from Fluid Handling- Fluid Control Equipment Product line

  • Ductive Iron Flap Valve

    Available in size range 80mm – 600mm as standard (larger sizes available). Pressure range 6m on.

    By Industrial PENSTOCKS ltd based in Dudley, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you