We couldn't find any flap valve equipment suppliers or service providers located in Cambodia
Here is a list of equipment results with suppliers serving Cambodia
Flap Valve Equipment Available In Cambodia
-
Manufactured by penstocks.de GmbHbased in GERMANY
seful as a reflux safety system against ...
-
Manufactured by KWT Group/ KWT International member of Bergschenhoek Groepbased in NETHERLANDS
The correct flapvalve can be easily calculated by using an advanced calculation program. Dynamic preconditions play a decisive role, in particular in relation to certain applications as well as static conditions. KWT advises and supplies the correct flapvalve for all applications, regardless of whether they are being used in tidal, pumped or gravitational outflow applications.AII our products are ...
-
Manufactured by KWT Group/ KWT International member of Bergschenhoek Groepbased in NETHERLANDS
The correct flapvalve can be easily calculated by using an advanced calculation program. Dynamic preconditions play a decisive role, in particular in relation to certain applications as well as static conditions. KWT advises and supplies the correct flapvalve for all applications, regardless of whether they are being used in tidal, pumped or gravitational outflow applications. All our products ...
-
Manufactured by M&H Valve Companybased in USA
Flap valves are used for end closure of outfall lines, or in manholes, to prevent entrance of backwater. They swing open under direct pressure to release the outfall fluid and close when direct pressure is relieved. The valve disc is offset from vertical to ensure positive closing.Flap valves are used in filtration and sewage ...
-
Manufactured by Waterfront Fluid Controls Ltdbased in UNITED KINGDOM
Waterfront have designed a range of ‘next generation’ HDPE (High Density Polyethylene) Flap Valves. This range comprises lightweight, corrosion resistant flap valves which act as Non-Return Valves and check valves for the prevention of reverse ...
-
Manufactured by Hyquip Systems Limitedbased in INDIA
HYQUIP Flap Valves are offered in three different versions; Gravity, Motorised and Pneumatic to suit different applications in the industry. They are preferred for handling highly abrasive or lumpy materials which have tendency to stick. They can also be installed in tandem for very high differential pressures. The body of the valve can be of ...
-
Manufactured by KWT Group/ KWT International member of Bergschenhoek Groepbased in NETHERLANDS
The correct flapvalve can be easily calculated by using an advanced calculation program. Dynamic preconditions play a decisive role, in particular in relation to certain applications as well as static conditions. KWT advises and supplies the correct flapvalve for all applications, regardless of whether they are being used in tidal, pumped or gravitational outflow applications. All our products ...
-
Manufactured by KWT Group/ KWT International member of Bergschenhoek Groepbased in NETHERLANDS
The correct flapvalve can be easily calculated by using an advanced calculation program. Dynamic preconditions play a decisive role, in particular in relation to certain applications as well as static conditions. KWT advises and supplies the correct flapvalve for all applications, regardless of whether they are being used in tidal, pumped or gravitational outflow applications. All our products ...
-
Manufactured by FCA Valvesbased in SPAIN
The DFL model FCA flap type damper is designed for pneumatic transport applications and is used to isolate air or industrial gas in combustion and various process lines where temperatures may reach up to 900ºC. It consists of a cylinder shape body and a flap type gate. When the flap comes in contact with the seat that is lodged in the ...
-
Manufactured by Fernco Ltdbased in UNITED KINGDOM
HDPE Flap Valves from Fernco, previously known as Flexseal, provide a high strength, low cost solution, preventing backflow through drain or sewerage ...
-
Manufactured by Althon Limitedbased in UNITED KINGDOM
100mm tidal flap valves are recommended for use below the waterline and in tidal applications for pipework up to 100mm. Our tidal flap valves are typically installed below the normal water level to prevent back flow up a pipe. Althon tidal flap valves are suitable for use with a water pressure of ...
-
Manufactured by Althon Limitedbased in UNITED KINGDOM
Althon 700mm HDPE flap valves can be used in surface, sewer and water process applications. Our 700mm HDPE flap valves are a simple and highly effective way to prevent water backflow into a system. 700mm HDPE non return flap valves are manufactured in HDPE and stainless steel grade 316L. Althon ...
-
Manufactured by WAMGROUP S.p.A.based in ITALY
The DVA Diverter Valve consists of a casing in stainless steel lined with SINT engineering polymer and a flap in SINT® engineering polymer with a steel core. The flap is activated by a manual lever, or by a pneumatic or electric ...
-
Manufactured by Althon Limitedbased in UNITED KINGDOM
Althon 600mm HDPE flap valves can be used in surface, sewer and water process applications. Our 600mm HDPE flap valves are a simple and highly effective way to prevent water backflow into a system. 600mm HDPE non return flap valves are manufactured in HDPE and stainless steel grade 316L. Althon ...
-
Manufactured by Waterfront Fluid Controls Ltdbased in UNITED KINGDOM
Waterfront design and manufacture a range of ‘fish friendly’ flap valves that are used to help the migration of fish around water flow control equipment. Our design is based on our standard HDPE flap valve which has a smaller, upside down pet flap attached to the front; attached to this pet ...
-
Manufactured by Waterfront Fluid Controls Ltdbased in UNITED KINGDOM
Waterfront design, manufacture and, if require, install stainless steel flap valves to suit exact project-specific requirements. Our Stainless Steel flap valves are suitable for use in fresh water, rivers, outfalls and surface and storm water ...
-
Manufactured by Waprobased in DENMARK
For mounting in tube without socket. Body: PEHD 100 Valve flap: Stainless steel EN 1.4404 eller PEHD 500. Off-seating pressure Max 0,5 bar. Free ...
-
Manufactured by Waprobased in DENMARK
For mounting in tube with socket.Materials:Body: PEHD 100.Valve flap: Stainless steel EN 1.4404 or PEHD 500.Pressure: Off-seating pressure.Operation:Free ...
-
Manufactured by ITK Envifront ABbased in SWEDEN
Flap valve SSKA is designed for dust output from dust extracting plants. The SSKA can be used with both single and double montage. The later concedes discharges during operation. SSKA is used where the sealing demands are ...
-
Manufactured by Iverna 2000 S.L.based in SPAIN
Practical and simple solution to eliminate the return of wastewater as well as bad odors and pests of rats, cockroaches and other insects coming from the sewage. It is an ideal product for situations that require a slight loss of load in the direction of flow and when a great tightness is needed in the opposite direction; as for example in sewers, spillways, sewage treatment plants, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you