flocculant Equipment in Poland

23 Results found

Current filtering criteria

You can remove a filter by clicking on the x

Kurifloc/Gilufloc - Flocculation Systems

by Kurita     Office in Warszawa, POLAND

Kurita´s broad range of flocculation products to clarify make-up water and / or purify wastewater. By treating raw water and enabling its risk-free use the costs for water can be reduced.

Labufloc - Retention Additives & Flocculants

by Kurita     Office in Warszawa, POLAND

Our LABUFLOC polymers are additives for the improvement of retention and drainage. Furthermore organic, inorganic and combined products for fiber recovery and sludge dewatering are available.

GILUFLOC - Inorganic Flocculants and Fixatives

by Kurita     Office in Warszawa, POLAND

Polyaluminiumchlorides (PAC) have been successfully applied since neutral paper making became a standard in industry.

LUFLOC - Highly Concentrated, Inorganic Flocculants

by Kurita     Office in Warszawa, POLAND

LUFLOC is used for: Drinking water treatment: Removal of suspended organic and inorganic matter. It reduces the amount of diluted substances as well as metals. Municipal and industrial water treatment: as Flocculants for suspended matter remaining after biological treatment in the water. It reduces the content of dissolved organic impurities and ...

Gilufloc - Aluminum Compounds - Inorganic Flocculants and Fixatives

by Kurita     Office in Warszawa, POLAND

Polyaluminiumchlorides have been successfully applied since neutral paper making became a standard in industry.

MICROSORBAN - Highly Reactive and Concentrated Flocculants and Adsorbent Agent

by Kurita     Office in Warszawa, POLAND

MICROSORBAN is an optimal combination of basic polyaluminiumchlorides and polyelectrolytes. It is ideal: For the treatment of water and waste water. For the elimination of interfering solid substances, emulsion components and solutes. Fixation of anionic trash in paper production.

Model VP1 - Timer Peristaltic Dosing Pump

by Verderflex Peristaltic Pumps - part of the Verder Group     Office in POLAND

Digital timer peristaltic tube pump is suitable for dosing flocculent, enzymes and algaecides. The pump is easy to install and maintain, featuring a segmented digital display and 10 starts/stops for a daily programming.

Model AM-02 - Helical Gear Drive Agitator

by AGIMIX Poland Sp. z o.o.     based in Rzeszów, POLAND

Typical applications: Rapid mixing for WWTP; Chemical make down in continuous operations; Small agitator applications for chemical make-up tanks (batch); Flocculation; Mixing of chemicals or any liquid + solids or liquid + liquid.

DEWA - Model F-M - Sludge Conditioners (Flocculators)

by Dewaco Ltd     Distributor in WARSAW, POLAND

This equipment has been designed to be used in flock formation prior to sludge thickening and dewatering. The DEWA F-M flocculator is equipped with a paddle stirrer which can be easily regulated to work between 20-100 rpm. Different tank volumes are available according to the sludge feed rate. All parts are made of stainless steel materials.

Johnson Lamella - Model LT - Separator

by AWP Nordic Products AB     Office in Łódź, POLAND

The Johnson Lamella Separator Model LT is a unit for separating solid particles or sludge from liquids, usually water. The LT model is a combined lamella sedimentation & sludge thickening unit, specially suited for liquids with a high sludge content, as well as applications where a high solids sludge is required. The Lamella Separator can also ...

DIGEFLO™ - Effective biogas flotation for industry

by SYMBIONA SA     based in Warszawa, POLAND

DIGEFLO™ is a technology designed to treat highly concentrated industrial wastewater with high fat content, e.g. from dairy, fishing or meat industry. The anoxic gas flotation system designed by company's experts allows for significant loading rates reduction and minimizes the amount of sludge produced by the wastewater treatment plant.Thanks to ...

Dissolved Air Flotation (DAF) System

by SYMBIONA SA     based in Warszawa, POLAND

The Dissolved Air Flotation units are used to remove the suspended matter and fats from the wastewater (or from water). These particles, together with dissolved solids (COD or nitrogen compounds), constitute an important source of pollution that can be regulated.

Model KDA - Doppler Pipe Sensor

by NIVUS GmbH     Office in Gdynia, POLAND

KDA flow velocity sensors are suitable for continuous measurement of slight to heavily polluted media. The pipe sensors are designed for installation in pipes from the outside using a nozzle. Combined with transmitter types such as PCM F and without OCM F the result is a complete flow measurement system.

AQUADYN - Hollow-Fibre Modules

by MICRODYN-NADIR GmbH     Distributor in Nowy, POLAND

The conventional treatment of water is based on a multi-step process including pre-filtration, precipitation/flocculation/coagulation, sedimentation, sand filtration and finally disinfection.

Model POA - Correlation Pipe Sensor

by NIVUS GmbH     Office in Gdynia, POLAND

Medium measurement range for levels up to ca. 1m: Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation in pipes from the outside. POA flow velocity sensors are suitable for continuous measurement of slight to heavily polluted media. The pipe-shaped sensors are designed for ...

ROVAPO® - Zero Liquid Discharge Technology

by SYMBIONA SA     based in Warszawa, POLAND

ROVAPO® is a family of “zero-discharge” systems, allowing full recovery of water from industrial sewage and leachate. This widely acknowledged solution an answer to the problems of the aerospace, automotive, electroplating, high-tech and shale gas industries. It is well-suited for every industrial sewage with high salt content, heavy metals and ...

Model KDA - Doppler Wedge Sensor

by NIVUS GmbH     Office in Gdynia, POLAND

KDA flow velocity sensors are suitable for continuous measurement of slight to heavily polluted media. The wedge-shaped sensors are designed for installation on either the channel wall or the channel bottom. Combined with transmitter types such as PCM F and OCM F the result is a complete flow measurement system.

DynaSand - Model Deni - Filter

by AWP Nordic Products AB     Office in Łódź, POLAND

Just like in a conventional DynaSand filter, the water to be denitrified is admitted into the filter through the inlet distributor. As the water flows through the filter bed, nitrite (NO2) and nitrate (NO3) are converted into nitrogen (N2) by a layer of micro-organisms formed on the surfaces of the filter grains. The nitrogen is discharged from ...

Model POA - Correlation Wedge Sensor

by NIVUS GmbH     Office in Gdynia, POLAND

Medium measurement range for levels up to ca. 1m. Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation on channel wall or channel bottom. POA flow velocity sensors are suitable for continuous measurement of slight to heavily polluted media. The wedge-shaped sensors are designed for ...

EKOTON - DAF-Unit

by EKOTON Industrial Group     Office in Elk, POLAND

DAF-units are used for the removal from wastewater of fine-sized sparingly soluble particles as fat, weighed and surfactant species at pulp and paper plant enterprises, food and oil-refining industry, small sewage treatment facilities and also for sludge compound thickening at utility plants treatment facilities.The special shape of unit chamber ...

Need help finding the right suppliers?

Let the XPRTs do the work for you