Singer Valve Flow Controller Equipment
-
Manufactured by Mueller Water Productsbased in CANADA
pressure below the diaphragm exceeds the combined forces of the spring and the sensing pressure, the pilot valve closes. The 160-RF is the standard rate of flow control pilot on all 106 and 206 series valves. ...
-
Manufactured by Mueller Water Productsbased in CANADA
Micrometer flow control valves allow for precise flow control. There is full flow in one direction and adjustable restricted flow in the opposite direction. They are standard on certain models, such as BPC pump control valves and available as an option for other applications. ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Singer models 106-2SC-MV and 206-2SC-MV electronic flow control and metering valves are based on the 106-PG or 206-PG main valve. The pressure in the upper operating chamber is controlled by operating the pilot solenoids. The PLC within the MV1-TP control panel determines whether the opening solenoid or the closing solenoid ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PFC / 206 PFC Pressure Modulation Valve is a pressure reducing valve with a special (Patented) pilot that increases downstream pressure as flow increases. The PFC valve alters and controls pressure with flow to create virtually constant pressure at the critical pressure point in a system. It will also automatically adjust for ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RF and 206-RF rate of flow control valves are based on the 106-PG or 206-PG main valves. The valve is ideal for limiting the flow to a pre-determined maximum (via maintaining a continuous pressure differential across an orifice). When the pressure differential is less than the set-point, the valve opens, allowing flow to ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-EF-8837BX and 206-EF-8837BX excess flow valves are based on the 106-PT and 206-PT Double Chamber main valves. The valve is designed to shut-off tightly when flow exceeds a predetermined amount. The 625-RPD pilot senses the pressure drop of the valve and closes the valve when the tripping flow is reached. Typical pressure drop at ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-A-Type 2 and 206-A-Type 2 altitude control valves are based on the 106-PG or 206-PG main valve and are ideal for maintaining a preset maximum water level. The valve functions as a two position control valve, either fully open or fully closed. The Type 2 valve allows normal forward flow to fill the reservoir to the maximum ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-A-Type 1 and 206-A-Type 1 altitude control valves are based on the 106-PG or 206-PG main valve and are ideal for maintaining a preset maximum water level. The valve functions as a two position control valve, either fully open or fully closed. The Type 1 allows normal forward flow to fill the reservoir to the maximum level and then ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-A-Type 4 and 206-A-Type 4 altitude control valves are based on the 106-PG or 206-PG main valve, and are ideal for maintaining a preset maximum water level. The valve functions as a two position control valve, either fully open or fully closed. The Type 4 allows normal forward flow to fill the reservoir to the maximum level, then ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-A-Type 3 and 206-A-Type 3 altitude control valves are based on the 106-PG or 206-PG main valve, and are ideal for maintaining preset maximum level. The Type 3 allows normal forward flow to fill the reservoir to the maximum level, then closes drip-tight at the set-point. The valve opens to permit reverse flow through the valve ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 26 flow stabilizer is a self-cleaning, opening speed control. It is used in conjunction with a fixed restriction orifice that is usually threaded into port 3. The 26 stabilizer allows free flow down to the bonnet (port 1) and restricts flow up from port 1. The 26 stabilizer is used as the standard ...
-
Manufactured by Mueller Water Productsbased in CANADA
The fixed restriction is a 303 stainless steel bodied fitting with a stainless steel orifice plug. The fixed restriction controls the flow rate in the pilot system. The orifices are sized to provide the proper control to a select series of valve sizes only. This all stainless steel version replaces all previous versions of the ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 852-B needle valve is a pilot speed control valve. The body is brass and the stem is stainless steel with a fine thread for controlling flow. O ring packing assures leak proof, trouble free service. 1/4 in / 7.5 mm NPT female to female end connections. ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 206-PG series control valve is the preferred choice for pressure reducing valves, flow control valves, relief valves and applications with lower to medium flows. This hydraulically operated valve introduces or releases water from the control chamber above the diaphragm to effectively maintain water ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PG series control valve is designed to suit a large variety of applications such as pressure, flow or level control. This hydraulically operated valve introduces or releases water from the control chamber above the diaphragm to effectively maintain accurate water control. ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PG series control valve is designed to suit a large variety of applications such as pressure, flow or level control. This hydraulically operated valve introduces or releases water from the control chamber above the diaphragm to effectively maintain accurate water control. Refer to Main Valve Options and ...
-
Manufactured by Mueller Water Productsbased in CANADA
relief pilot, opening on excessive pressure. The 81-RPD differential pilot responds to the pressure differential across its diaphragm. A pressure differential is created when there is a system pressure increase. The flow into the accumulator creates a pressure drop across the fixed restriction, which lowers the pressure in the connection ...
-
Manufactured by Mueller Water Productsbased in CANADA
flowing conditions, the pilot reacts to small changes in pressure to control the main valve position by modulating the pressure above the diaphragm. The downstream pressure is maintained relatively steady at the pilot ...
-
Manufactured by Mueller Water Productsbased in CANADA
. The 160 pilot senses downstream pressure and under flowing conditions, it reacts to small changes in pressure to control the valve position by modulating the pressure above the ...
-
Manufactured by Mueller Water Productsbased in CANADA
. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating relatively steady as the pilot set points. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you