Flow Modeling Equipment In Africa
-
Manufactured by TSI Incorporatedbased in USA
The Flow Splitter directs an aerosol sample to as many as four destinations at once. This accessory is especially useful when performing instrument comparison or calibration experiments. Smooth flow transitions provide equal flow distribution. Stainless-steel construction and an electropolished interior prevent the aerosol from being ...
-
Showcasebased in NETHERLANDS
To guarantee an efficient biofouling control from a dosing point onwards it is crucial to expose all the intake and water system surfaces to the dosed biocide products. H2O designs and engineers biocide dosing systems to achieve an optimal dispersion and effectiveness from dosing system onwards. This is part of the services we can provide with ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The model 2030CF Calibration Frame provides a check on the proper operation of your Model 2030 and 2031 series flowmeters. The frame imparts a torsionally precise spin to the rotor and a count difference is noted in the flowmeter window. A minimum count is necessary for the flowmeter to be within calibration. ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The Model 2135 is a real time, hand held microprocessor controlled data acquisition unit. When used in conjunction with the Model 2031H electronic flowmeter, the unit receives the flow rate pulses and calculates the fluid velocity based on a highly stable crystal controlled time base. The well defined characteristics of the Model ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The Model 2135 is a real time, hand held microprocessor controlled data acquisition unit. When used in conjunction with the Model 2031H electronic flowmeter, the unit receives the flow rate pulses and calculates the fluid velocity based on a highly stable crystal controlled time base. The well defined characteristics of the Model ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
The ONLY fully BIOASSAY validated vertical lamp UV system on the market. The Aquaray® 40 HO is the premier solution for the disinfection of waterborne pathogens in municipal wastewater. The system utilizes low pressure, high output UV lamps for reduced footprint and energy efficiency. The Aquaray® vertical lamp technology has been used by municipalities for over a decade with over 250 ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Contactless flow measurement for open channels and part filled ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Contactless flow measurement for open channels and part filled pipes. The contactless low-maintenance radar sensor provides reliable operation even at very high discharge velocities with low flow levels. Dynamic hydraulic models for various channel shapes based on varying filling levels enable accurate detection of the real flow ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Allows high accurate flow measurements using the transit time method according to IEC 60041 for part filled and full pipes, open channels and water bodies. Up to 8 measurement ...
-
PremiumManufactured by Eureka Water Probesbased in USA
Fluorescent dyes like Rhodamine are often added to water systems to provide water discharge and velocity data. Dye tracing studies can provide useful information for modeling surface and groundwater systems in addition to tracing contaminants. Fluorometers allow researchers to measure ultra-low concentrations of dye. The sensors ...
-
PremiumManufactured by Eureka Water Probesbased in USA
Fluorescent dyes like Fluorescein, are often added to water systems to provide water discharge and velocity data. Dye tracing studies can provide useful information for modeling surface and groundwater systems in addition to tracing contaminants. Fluorometers allow researchers to measure ultra-low concentrations of dye. With extreme ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000F was designed specifically for Flares stack sand reports flow velocities from 0.03 - 170 m/sec with a ± 2% accuracy. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
High accurate with intuitive operation. For ultrasonic flow measurement of slight to heavily polluted media in part filled and full pipes and channels. Best possible results even under difficult ...
-
Manufactured by ScaleBuster - Ion Enterprises Ltdbased in UNITED KINGDOM
ION ScaleBuster technology is available in numerous sizes to cover a wide range of flow rates. Our models are equipped with either European (E) or North American (U) connections to address virtually any piping or equipment configuration. The durable construction of ScaleBuster conditioners allows them to provide years of reliable ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Rotork Instruments fast response, high flow, compact I/P, E/P, D/P and P/I electro-pneumatic converters have extensive combinations of inputs and outputs, carry standard FM, CSA, ATEX or IECEx agency approvals, and maintain accuracies of up to 0.15%. Fast response, high flow and high accuracy models feature proportional pressure ...
-
Manufactured by Windlab Systems Pty Ltd.based in USA
. Windlab has been working to develop a much more modern and accurate methodology that makes optimum use of all on-site measurements combined with state-of-the-art regional-scale and very high resolution flow modelling. This modelling system is called WindScape Hybrid Deterministic Statistical Method ...
-
Manufactured by PEAK Scientific Instruments Ltdbased in UNITED KINGDOM
Membrane technology is at the heart of the Infinity 1031 Hi-Flow generator delivering one output of laboratory-grade nitrogen, and two dry air outputs, the Infinity 1031 Hi-Flow generator is a durable, hassle-free solution for SCIEX LC-MS systems. The choice of Infinity model will depend on the application, with different gas ...
-
Manufactured by Agilent Technologies, Inc.based in USA
Agilent Bravo Automated Liquid Handling Platform is both versatile and precise, loaded into a small, compact footprint. It is the fastest, most versatile liquid-handling system available. Two Bravo Platform models are available: standard and SRT. The standard model fits in most standard laminar flow hoods. The SRT model is three ...
-
Manufactured by PlugCo - a brand by ArGesim Makinabased in TURKEY
Flow Through Packer is a double layer reinforced rubber used to repair pipelines while bypassing the flow through its bypass connection and allows the subsurface system to keep running during the repair. This system is ideally suited to avoid costly and time-consuming ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-SM and 206-PR-SM series control valves are engineered to be used anywhere pressure reducing valve failure is unacceptable. These valves have a second and independent operating system superimposed upon the standard primary system. With the assurance of a back-up system, maintenance schedules may be extended as pressures will continue to be controlled even in the event of failure with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you