Flow Monitoring Equipment Available In Northern Ireland
-
PremiumManufactured by ENVEAbased in FRANCE
Material flow monitoring with Flow/No Flow information plus additional “Detection of blockage” or “Material flow interruption” function ...
-
PremiumManufactured by ENVEAbased in FRANCE
FlowJam T is a sensor that has been specially developed for monitoring the flow of solids that are conveyed through thin pipelines. The sensor can be used for tubes made of electrically non-conductive material, such as plastic or rubber, with outside diameters between 4 and 25 mm. The sensor is mounted around the tube for ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FS10i is a universal flow switch and flow monitor designed for simple insertion into ½” (13mm) or larger diameter pipes and square ducts. The unit is suitable for either liquid or air/gas applications. It is fast responding and highly repeatable to both increasing and decreasing flow rate changes. The standard 1A ...
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave sensor for continuous moisture measurement in dry bulk solids, with flow detection and process temperature ...
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave sensor for contactless monitoring of material flows with trend ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FS10A is a universal flow switch and monitor specifically designed for gas and liquid process analyzer sampling systems. The FS10A is a fast responding, highly repeatable sensor which installs easily into a standard tube tee fitting or new SP76 (NeSSI) modular manifold. The FS10A utilizes proven thermal dispersion flow measurement ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The GAS-100-XX/100E-XX Series portable flow computer systems are designed to upgrade existing air sampling systems. The GAS-100-XX/100E-XX are connected in line between the pump inlet and the filter holder. The GAS-100-XX/100E-XX upgrade eliminates the need to engage in expensive conversions of equipment or the need to purchase new air ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000F was designed specifically for Flares stack sand reports flow velocities from 0.03 - 170 m/sec with a ± 2% accuracy. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000W model is equipped with Automatic Gain Control (AGC) to compensate for variations in opacity caused by particulate matter or moisture carried in the flow. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates a true average flow reading. The OFS ...
-
based in UNITED KINGDOM
The Accusonic Model 7510 Flowmeter is designed for accurate, reliable flow measurement in pressurized pipes, open channels, and gravity-flow pipes flowing partially full through ...
-
Manufactured by Eletta Flow ABbased in SWEDEN
The D2 and D5 Flow Monitor is the new model with microprocessor based electronics and back lit digital display.The display can be rotated 90 degrees (electronically) which makes it possible to install the monitor both vertically and horizontally in any piping ...
-
Manufactured by Metri Measurementsbased in UNITED KINGDOM
Designed for use with liquids, the Metri IC-FMS Flow Monitor builds on the success of the LPM. Featuring rugged radial turbine flow technology with a simple local display transmitter and ...
-
Manufactured by iCenta Controls Ltdbased in UNITED KINGDOM
Designed for use with liquids, the Metri IC-FMS Flow Monitor builds on the success of the LPM. Featuring rugged radial turbine flow technology with a simple local display transmitter and switch. ...
-
PremiumManufactured by ENVEAbased in FRANCE
The measuring system for continuous flow metering in dense-stream conveying and high levels of ...
-
Distributed by Veris Industriesbased in USA
Series 3000 panel mounted digital flow monitors are designed for HVAC submetering applications. These compact devices display flow rate and flow total on an alphanumeric LCD display. Calibration, selection of measurement units, and output programming are keypad ...
-
Manufactured by Greenbank Energy Solutions, Inc.based in USA
These devices can be used for the early recognition of flow disturbances in the transport of powders, dust, pellets and granules. This can reliably prevent problems caused by blockages, an absence of material or system failures, for instance. The measurement process of the FlowSwitch 510M is based on the physical principle of the Doppler ...
-
Manufactured by ChemTec Equipment Company, Inc.based in USA
Best for applications where the normal flow to set point is 10:1 or ...
-
Manufactured by ChemTec Equipment Company, Inc.based in USA
Monitors flows from 10 cc/m air, in line ...
-
Manufactured by Flow-Mon Limitedbased in UNITED KINGDOM
With our own factory based in Harrogate, North Yorkshire Flow-Mon is able to make bespoke Flow Monitors. These include but not limited to special end to ends, different inlet - outlet fittings, body materials, switching requirement, and location. If you have a very old flow meter (monitor/indicator) that is no ...
-
Manufactured by Flow-Mon Limitedbased in UNITED KINGDOM
A spring loaded valve plate which is deflected proportionate to the flow in line. A mechanical pointer indicates the flow on an individually calibrated scale. Various switching options are available in a standard nylon or metal (Bronze, Aluminium or Stainless steel) enclosure box. SPDT, DPDT, 4-20mA for both safe and hazardous areas. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you