Flow Sensor Equipment In Costa Rica
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS456 is a pressure transducer for water-level measurements in canals, wells, ponds, harbors, lakes, streams, and tanks. It has a rugged titanium case that allows it to be used in saltwater and other harsh environments. The CS456 outputs either a digital SDI-12 or RS-232 signal to indicate observed pressure and temperature. This output can be read by many of our data loggers. The CS456 ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS451 is a pressure transducer with a a stainless-steel case. It is used for water-level measurements and can be submerged in most canals, wells, ponds, lakes, and streams. The CS451 outputs either a digital SDI-12 or RS-232 signal to indicate observed pressure and temperature. This output can be read by many of our data loggers. The CS451 replaces the CS450 transducer. The new transducers ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The LevelVUE™B10 is a cost-effective, accurate, reliable solution for water-level measurements based on a non-submersible pressure transducer system. This type of sensor is a bubbler. Bubblers accurately measure the pressure it takes to create a continuous airflow in an airline submerged in water. The LevelVUE™B10 is designed for ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS475A radar sensor monitors the water level of rivers, lakes, tidal seas, and reservoirs. The sensor is ideal for areas where submersed sensors can be damaged due to corrosion, contamination, flood-related debris, lightning, or vandalism. It emits short microwave pulses and then measures the elapsed time between the emission and ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Measuring the quality and quantity of wet steam, saturated steam and superheated steam. Steam has long been an indispensable source of energy in the process industry. Here, 40 percent of fossil fuels alone are used for the generation of steam. With Prowirl F 200, you have the energy and cost efficiency of your steam system well under control. This animation shows why, and explains how Prowirl can ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
in a storm water overflow basin with only 1 sensor. Up to 6 relays for tendency alarm, flow pulse output or backwater/sludge alarm, 1 or 2 channel version. Transmitter in housing for field or top-hat rail mounting for the ultrasonic sensors ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Recording and controlling of batch operations. The Batch Controller RA33 is designed to record flow and control output signals for valves and pumps to ensure the exact dosing of predefined batch quantities. The measured volume can be corrected with the temperature/density compensation function. The filling process can be ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Flowmeter for smallest flow rates with genuine loop-powered technology. Promag H is the preferred sensor for applications with highest requirements in the chemical and life sciences industries. With its genuine loop-powered technology, Promag H 200 enables cost-effective and seamless integration into existing infrastructures. It offers ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Flowmeter with best-in-class accuracy despite pipe reduction. Prowirl R proves to be the dependable solution for energy management with steam, gas and liquids in ancillary processes. Moreover, its design is optimized for low flows. With genuine loop-powered technology, Prowirl R 200 enables cost-effective and seamless integration into ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Sensor with EN ISO 12944 corrosion protection and state-of-the-art transmitter for Water&Wastewater. As a specialist with corrosion protection, Promag W is suitable for every application in the water and wastewater industry as well as for custody transfer. It is the ideal solution for direct underground installation or permanent underwater ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Flowmeter optimized for requirements of high-pressure mating pipes. Prowirl O is ideally suited for reliable process control in demanding gas and steam applications with high process pressure. Moreover, its design ensures maximum safety in main and ancillary processes. With genuine loop-powered technology, Prowirl O 200 enables cost-effective and seamless integration into existing ...
-
PremiumManufactured by Myron L Companybased in USA
The innovative Myron L RO-CHECK (U.S. Patent # 4,762,611) reliably monitors total dissolved solids 24 hours a day. A quick glance at the display assures RO users of their water TDS quality. Should membrane failure or other problems cause TDS to rise above the set point, the words “CHECK SYSTEM” flash in the LCD. This silent indicator alerts, rather than alarms, the user that service ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Steam calculator for recording steam mass and energy flow for saturated or superheated steam. The steam calculator EngyCal RS33 is used to record steam mass and energy flow of saturated and superheated steam. The calculation is based on the measured process variables volume flow, temperature and/or pressure. The EngyCal RS33 uses the ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The AP200 is a complete, integrated CO2 and H2O atmospheric profile system. It measures carbon dioxide (CO2) and water vapor (H2O) concentration from up to eight intakes, which are normally spaced along the height of a tower to give a vertical profile. The AP200 is often used in conjunction with an eddy-covariance system to measure the storage term and provide you with a more complete measure of ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS125 is an infrared forward-scatter visibility and present weather sensor for stand-alone use or with automatic weather stations including those for road, marine, and airport applications. The CS125 has an attached 5 m (16.4 ft) cable and DB9 ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Hygienic Memosens sensor for turbidity measurement in drinking water, process water and utilities. Turbimax CUS52D is a smart sensor with lab accuracy that allows unattended operation in all measuring points of your water production. Thanks to its hygienic, self-cleaning design, you can mount it directly into your pipeline. This way you will ...
-
Manufactured by Rotork plcbased in UNITED KINGDOM
Midland-ACS 3500 Series 1/2" lubricator is a 316L stainless steel unit providing lubrication of compressed air for the actuation ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Singer models 106-2SC-PCO and 206-2SC-PCO dual solenoid electronic valves are based on the Singer model 106-PG or 206-PG main valve. The flow into and out of the upper operating chamber is controlled by the two pilot solenoids. The electronic control determines whether the opening solenoid or the closing solenoid is operated. The ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Singer Model 106-SPI-MV is a Single Point Insertion Electromagnetic Flow Meter, installed and calibrated in conjunction with a Singer Valve to provide an accurate flow rate that can be utilized with the metering valve as a stand alone option or built into a 106-2SC-PCO pilot system to provide complete flow-based valve ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The HTMA series is a range of modified atmosphere high temperature ovens for use with inert atmospheres up to 700°C. Separate flow controls for purge and process gases mean that once the chamber has been purged of atmospheric air process gas can be used with lower flow rates. Switching between purge and process gases can either be ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you