Flow Sensor Equipment Near Botswana
-
Manufactured by Codel - a Forbes Marshall companybased in UNITED KINGDOM
developed within the tunnel. Three decades of development, knowledge and practical experience have been utilised to produce the advanced TunnelTech 801 air flow sensor that combines the reliability of ultrasonic technology and delivers superb accuracy and reliability. The TunnelTech 801 has been specifically designed for road, rail and civil ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000P Particulate and Flow sensors report Air Flow and a general Particulate loading and percent opacity in virtually any operating condition. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000 has a range of 0-40m/sec and is the only flow sensor that gives a true non-contracting cross-stack flow measurement of the process. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000W model is equipped with Automatic Gain Control (AGC) to compensate for variations in opacity caused by particulate matter or moisture carried in the flow. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates a true average flow reading. ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000F was designed specifically for Flares stack sand reports flow velocities from 0.03 - 170 m/sec with a ± 2% accuracy. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
OSi's patented Wind Speed and Smoke Sensor (WSS™) makes drift free air flow measurements across the tunnel, calculates true average wind speed, and detects smoke. The WSS-300-DS model is equipped with Automatic Gain Control (AGC) to compensate for variations in opacity caused by particulate matter, smoke, or moisture suspended in ...
-
Manufactured by Dab Pumpsbased in ITALY
The Active Driver devices are innovative variable speed electric pump integrated control systems, capable of maintaining a constant pressure in relation to the varied flow rates. The set pressure can be adjusted and the various settings and related error warnings can be viewed, thanks to a simple and immediate user interface. Active ...
-
Manufactured by Hach - Veraltobased in USA
An economically-intelligent solution, the Hach sc200 Universal Controller with Ultrasonic Sensor is designed to give highly accurate level measurements that, in combination with a hydraulic structure, provides flow data in permanent scenarios. From the monitoring of inlet flow, final effluent and activated sludge to fulfilling NPDES ...
-
Manufactured by Hach - Veraltobased in USA
The Hach US9001 Down-Looking and Hach US9003 In-Pipe Ultrasonic Sensors bring independent level measuring capabilities to the Hach FL900 Series Flow Logger sensor family. These state-of-the-art ultrasonic sensors are excellent non-contact flow monitoring solutions to use for both level measurement and alarming or ...
-
Manufactured by Hach - Veraltobased in USA
Our most powerful monitoring system combines the convenience of wireless data delivery with the intelligence of non-contact flow monitoring. Using wireless Hach FL900 Series Flow Loggers and non-contact FLO-DAR AV Sensors, this system captures flow data with a high-level of accuracy, dramatically reduces required maintenance, and ...
-
Manufactured by GO Systemelektronik GmbHbased in GERMANY
Conductivity sensor with integrated temperature measurement for flow through ...
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The OPTITEMP TRA-W10 is a plug-in cable sensor (RTD) suitable for temperature measurement of solids, liquids and gases at low pressures and flow velocities. The temperature sensor can be used in pipes and tanks, from -50…+200°C / -58…+390°F. It features a Pt100 or Pt1000 measuring element that is placed in the measuring ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Designed for safety and serviceability, the WDG-V is a flue gas analyzer designed to provide accurate measurements of oxygen (O2), combustibles (CO+H2) and methane (CH4) for process control and safety in combustion applications. Offering safe, reliable operation through continual diagnostic checks and proactive alarms, the analyzer provides an additional layer of safety in burner management ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The CG1000 is a portable oxygen analyzer designed for industrial and laboratory applications. It has a wide operating range (0.1 ppm to 100% O2, autoranging), a fast response to oxygen changes, and advanced electronic capabilities for easy system ...
-
Manufactured by Eno Scientificbased in USA
The Eno Scientific WS2100 Flow Meter Kit combines all the instrumentation needed to perform a complete well draw down test. Starting with our popular sonic water level meter, the Well Sounder 2010 PRO, with its built-in data logger and USB computer connectivity. Add the new Eno Scientific WS131 Flow Meter with a variety of housing sizes and ...
-
Manufactured by Eno Scientificbased in USA
The Eno Scientific WS131 Flow Meter is designed to measure water flow for monitoring well drawdown and usage. It uses a modular design consisting of a PVC housing and an electronic sensor module that easily attaches to the housing using a hand tightened ring nut. With the sensor in place, electrical pulses are generated as water ...
-
PremiumManufactured by Eureka Water Probesbased in USA
Trimeter - Three Parameters at the Lowest Possible Cost. The Trimeter holds any one sensor* from the Sensor Parameters list, PLUS temperature and depth sensors (both are optional). For example, a Trimeter configuration could be turbidity, temperature, and depth. Another example could be DO and temperature. Eureka’s communication ...
-
Manufactured by Bruker Corporationbased in USA
gain. The high resolution linear piston drives and optional flow sensors allow for highly precise gradient control at the lowest flow rates and highest pressures. Thanks to a unique, patented pump head and active valve design it is now possible to completely automate all preparative and diagnostic functions, individual pre compression of ...
-
PremiumManufactured by ENVEAbased in FRANCE
Perfectly adapted for control and regulation of reagent in flue gas treatment and transport lines with very low material ...
-
PremiumManufactured by ENVEAbased in FRANCE
MCERTS QAL1 approved, stand alone or multi-sensor Particulate CEM providing high quality emission measurement for low dust concentrations from dry industrial ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you