Flow Sensor Equipment Near Vietnam
-
Manufactured by ProMinent GmbHbased in GERMANY
The modular bypass armature BAMa accommodates ProMinent sensors for water treatment. The armature is simply installed in a bypass of the main process line. It is available in various variants, each perfectly designed for special water treatment applications – from drinking water, water for pool & wellness to industrial ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The LevelVUE™B10 is a cost-effective, accurate, reliable solution for water-level measurements based on a non-submersible pressure transducer system. This type of sensor is a bubbler. Bubblers accurately measure the pressure it takes to create a continuous airflow in an airline submerged in water. The LevelVUE™B10 is designed for ...
-
Manufactured by TSI Incorporatedbased in USA
TSI's Flow Meter design team can develop the precise mechanical configuration, performance characteristics, and electronic interface you need to optimize your design. The exceptional performance of these embedded flow sensors can enhance your product's performance and improve the time to market on new product development. OEM Mass ...
-
Manufactured by TSI Incorporatedbased in USA
TSI Series 4200 mass flow sensors are specifically designed to measure gas flow rates in embedded applications. The rugged housing with sealed electronics and locking connector make them highly reliable in more demanding environments. They feature a very low pressure drop, wide flow rate range and 20 millisecond response time. ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS451 is a pressure transducer with a a stainless-steel case. It is used for water-level measurements and can be submerged in most canals, wells, ponds, lakes, and streams. The CS451 outputs either a digital SDI-12 or RS-232 signal to indicate observed pressure and temperature. This output can be read by many of our data loggers. The CS451 replaces the CS450 transducer. The new transducers ...
-
Manufactured by Onset Computer Corporationbased in USA
The HOBO State/Pulse/Event/Runtime data logger records state changes,electronic pulses and mechanical or electrical contact closures from external sensing devices. This logger is ideal for monitoring energy consumption, mechanical equipment operation, and water and gas flow. The HOBO UX90-001 State Logger is available in a standard 128 KB ...
-
Manufactured by Codel - a Forbes Marshall companybased in UNITED KINGDOM
developed within the tunnel. Three decades of development, knowledge and practical experience have been utilised to produce the advanced TunnelTech 801 air flow sensor that combines the reliability of ultrasonic technology and delivers superb accuracy and reliability. The TunnelTech 801 has been specifically designed for road, rail and civil ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS475A radar sensor monitors the water level of rivers, lakes, tidal seas, and reservoirs. The sensor is ideal for areas where submersed sensors can be damaged due to corrosion, contamination, flood-related debris, lightning, or vandalism. It emits short microwave pulses and then measures the elapsed time between the emission and ...
-
Manufactured by TSI Incorporatedbased in USA
Our flow measurement design team can develop the precise mechanical configuration, performance characteristics, and electronic interface you need to optimize your design. The exceptional performance of these embedded flow sensors can enhance your product's performance and improve the time to market on new product development. OEM Mass ...
-
PremiumManufactured by Myron L Companybased in USA
The innovative Myron L RO-CHECK (U.S. Patent # 4,762,611) reliably monitors total dissolved solids 24 hours a day. A quick glance at the display assures RO users of their water TDS quality. Should membrane failure or other problems cause TDS to rise above the set point, the words “CHECK SYSTEM” flash in the LCD. This silent indicator alerts, rather than alarms, the user that service ...
-
Manufactured by TSI Incorporatedbased in USA
Our engineering team can develop the precise mechanical configuration, performance characteristics, and electronic interface you need to optimize your design. The exceptional performance of these embedded flow sensors can enhance your product's performance and improve the time to market on new product development. OEM Mass Flow ...
-
Manufactured by TSI Incorporatedbased in USA
fast and convenient. The TSI mass flowmeters sensors are specified as 2% of reading. One TSI mass flow sensor covers the same range as three or more 'percent of full scale devices' ... with better accuracy at most ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS456 is a pressure transducer for water-level measurements in canals, wells, ponds, harbors, lakes, streams, and tanks. It has a rugged titanium case that allows it to be used in saltwater and other harsh environments. The CS456 outputs either a digital SDI-12 or RS-232 signal to indicate observed pressure and temperature. This output can be read by many of our data loggers. The CS456 ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Singer models 106-2SC-PCO and 206-2SC-PCO dual solenoid electronic valves are based on the Singer model 106-PG or 206-PG main valve. The flow into and out of the upper operating chamber is controlled by the two pilot solenoids. The electronic control determines whether the opening solenoid or the closing solenoid is operated. The ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS125 is an infrared forward-scatter visibility and present weather sensor for stand-alone use or with automatic weather stations including those for road, marine, and airport applications. The CS125 has an attached 5 m (16.4 ft) cable and DB9 ...
-
Manufactured by TSI Incorporatedbased in USA
instruments. Data appears on the LCD display in real time. The Model 3063 includes an analog output for flow rate and an RS-232 port for operational control, data logging, and data display. An in-line HEPA filter is included to protect the flow sensor and maintain the flowmeter’s calibration from particles in the aerosol sample. Model 3063 is ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Singer Model 106-SPI-MV is a Single Point Insertion Electromagnetic Flow Meter, installed and calibrated in conjunction with a Singer Valve to provide an accurate flow rate that can be utilized with the metering valve as a stand alone option or built into a 106-2SC-PCO pilot system to provide complete flow-based valve ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The AP200 is a complete, integrated CO2 and H2O atmospheric profile system. It measures carbon dioxide (CO2) and water vapor (H2O) concentration from up to eight intakes, which are normally spaced along the height of a tower to give a vertical profile. The AP200 is often used in conjunction with an eddy-covariance system to measure the storage term and provide you with a more complete measure of ...
-
Manufactured by Onset Computer Corporationbased in USA
The HOBO State/Pulse/Event/Runtime data logger records state changes,electronic pulses and mechanical or electrical contact closures from external sensing devices. This logger is ideal for monitoring energy consumption, mechanical equipment operation, and water and gas flow. The HOBO UX90-001 State Logger is available in a standard 128 KB ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Ozone capacity 380 - 6,080 g ozone/h. DULCOZON OZLa is an ozone generator with low life cycle costs. It combines a high ozone concentration with unbeatable efficiency. High-output ozone generator with a very compact design. The ozone systems DULCOZON OZLa are low-maintenance generators. The systems have a modular design and can therefore be flexibly adapted to the process requirements. The ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you