Only show results available in Virginia? Ok

Hedland flow switch equipment

  • Hedland - Flow-Alert Flow Switch

    Flow-Alert Flow Switch; Automatically signals alarm, if flow is too low or too high. Reed switch and latching models. Latching models include 4-pin electrical connector (Protection Class IP65). Flow ranges: 0.5 4 GPM (2 15 LPM) up to, 10 100 GPM (40 380 LPM). Rugged construction: Polysulfone or Radel R bodies for 1/2' thru 1' models. Radel R ...

    By Badger Meter, Inc. based in Milwaukee, WISCONSIN (USA). from Flow-Alert Flow Switch Product line

  • Hedland - Flow-Alert Reed Switch

    Flow-Alert Reed Switch; No mechanical linkage. Provides output to signal alarm if flow is too high or too low. Flow ranges: 3 - 25 SCFM (2 - 12 L/SEC) up to 80 - 800 SCFM (50 - 350 L/SEC). Construction: T316 stainless steel. Sizes: 1/4 to 1-1/2 inch ports. Ports: SAE, NPTF and BSPP. Pressure up to 1,500 psi (103 bar) maximum. Temperature up to 240 ...

    By Badger Meter, Inc. based in Milwaukee, WISCONSIN (USA). from Flow-Alert Reed Switch Product line

  • Hedland - Flow-Alert Reed Switch

    Flow-Alert Reed Switch: No mechanical linkage. Provides output to signal alarm if flow is too high or too low. Flow ranges: 0.2 - 2.0 GPM (1.0 - 7.5 LPM) up to 10 - 100 GPM (50 - 380 LPM). Construction: T316 stainless steel. Sizes: 1/4 to 1-1/2 inch ports. Ports: SAE, NPTF and BSPP. Pressure up to 6,000 psi (414 bar) maximum. Temperature up to 240 ...

    By Badger Meter, Inc. based in Milwaukee, WISCONSIN (USA). from Flow-Alert Reed Switch Product line

  • Hedland - Flow-Alert Reed Switch

    Flow-Alert Reed Switch; No mechanical linkage. Provides output to signal alarm if flow is too high or too low. Flow ranges: 0.02 - 0.2 GPM (0.1 - 0.75 LPM) up to 10 - 150 GPM (50 - 560 LPM). Construction: Brass and T303 stainless steel. Sizes: 1/4 to 1-1/2 inch ports. Ports: SAE, NPTF and BSPP. Pressure up to 6,000 psi (414 bar) maximum. ...

    By Badger Meter, Inc. based in Milwaukee, WISCONSIN (USA). from Flow-Alert Reed Switch Product line

  • Hedland - Flow-Alert Micro Switch

    Automatically signals alarm if flow is too high or too low. Automatically opens or closes electrical circuits. Triggers warning lights, buzzers and other devices. Shuts down pumps and/or other equipment to protect your operation against permanent damage. Install in any position. Easier to read linear scale. No flow straighteners or special piping ...

    By Badger Meter, Inc. based in Milwaukee, WISCONSIN (USA). from Flow-Alert Micro Switch Product line

  • Hedland - Flow-Alert Reed Switch

    Flow-Alert Reed Switch; No mechanical linkage. Provides output to signal alarm if flow is too high or too low. Flow ranges: 0.5 - 5.0 SCFM (0.2 - 2.2 L/SEC) up to 100 - 1000 SCFM (50 - 475 L/SEC). Construction: Aluminum, brass and T303 stainless steel. Sizes: 1/4 to 1-1/2 inch ports. Ports: SAE, NPTF and BSPP. Pressure up to 1,000 psi (69 bar) ...

    By Badger Meter, Inc. based in Milwaukee, WISCONSIN (USA). from Flow-Alert Reed Switch Product line

  • Hedland - Flow-Alert Micro Switch

    Flow-Alert Micro Switch: Automatically signal alarm if flow is too high or too low. Automatically opens or closes electrical circuits. Triggers warning lights, buzzers and other devices. Shuts down pumps and/or other equipment to protect your operation against permanent damage. Install in any position. Easier to read linear scale. No flow ...

    By Badger Meter, Inc. based in Milwaukee, WISCONSIN (USA). from Flow-Alert Micro Switch Product line

  • Hedland - Flow-Alert Reed Switch

    Flow-Alert Reed Switch; No mechanical linkage. Provides output to signal alarm if flow is too high or too low. Flow ranges: 0.02 - 0.2 GPM (0.1 - 0.75 LPM) up to 10 - 150 GPM (50 - 560 LPM). Construction: Aluminum, brass and T303 stainless steel. Sizes: 1/4 to 1-1/2 inch ports. Ports: SAE, NPTF and BSPP. Pressure up to 6,000 psi (414 bar) maximum. ...

    By Badger Meter, Inc. based in Milwaukee, WISCONSIN (USA). from Flow-Alert Reed Switch Product line

  • Hedland - Flow-Alert Micro Switch

    Flow-Alert Micro Switch; Automatically signals alarm if flow is too high or too low. Automatically opens or closes electrical circuits. Triggers warning lights, buzzers and other devices. Shuts down pumps and/or other equipment to protect your operation against permanent damage. Install in any position. Easier to read linear scale. No flow ...

    By Badger Meter, Inc. based in Milwaukee, WISCONSIN (USA). from Flow-Alert Micro Switch Product line

  • Hedland - Flow-Alert Reed Switch

    Flow-Alert Reed Switch; No mechanical linkage. Provides output to signal alarm if flow is too high or too low. Flow ranges: 0.02 - 0.2 GPM (0.1 - 0.75 LPM) up to 10 - 150 GPM (50 - 560 LPM). Construction: Aluminum, brass and T303 stainless steel. Sizes: 1/4 to 1-1/2 inch ports. Ports: SAE, NPTF, and BSPP. Pressure up to 6,000 psi (414 bar) ...

    By Badger Meter, Inc. based in Milwaukee, WISCONSIN (USA). from Flow-Alert Reed Switch Product line

  • Hedland - Flow-Alert Micro Switch

    Flow-Alert Micro Switch; Automatically signals alarm if flow is too high or too low. Automatically opens or closes electrical circuits. Triggers warning lights, buzzers and other devices. Shuts down pumps and/or other equipment to protect your operation against permanent damage. Install in any position. Easier to read linear scale. No flow ...

    By Badger Meter, Inc. based in Milwaukee, WISCONSIN (USA). from Flow-Alert Micro Switch Product line

  • Hedland - Flow-Alert Micro Switch

    Flow-Alert Micro Switch; Automatically signals alarm if flow is too high or too low. Automatically opens or closes electrical circuits. Triggers warning lights, buzzers and other devices. Shuts down pumps and/or other equipment to protect your operation against permanent damage. Install in any position. Easier to read linear scale. No flow ...

    By Badger Meter, Inc. based in Milwaukee, WISCONSIN (USA). from Flow-Alert Micro Switch Product line

  • Hedland - Flow-Alert Micro Switch

    Flow-Alert Micro Switch; Automatically signals alarm if flow is too high or too low. Automatically opens or closes electrical circuits. Triggers warning lights, buzzers and other devices. Shuts down pumps and/or other equipment to protect your operation against permanent damage. Install in any position. Easier to read linear scale. No flow ...

    By Badger Meter, Inc. based in Milwaukee, WISCONSIN (USA). from Flow-Alert Micro Switch Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you