Showing results for: Flow Meter Calibration Equipment In Malaysia
-
PremiumManufactured by General Oceanics Inc.based in USA
The model 2030CF Calibration Frame provides a check on the proper operation of your Model 2030 and 2031 series flowmeters. The frame imparts a torsionally precise spin to the rotor and a count difference is noted in the flowmeter window. A minimum count is necessary for the flowmeter to be within calibration. ...
-
PremiumManufactured by General Oceanics Inc.based in USA
The model 2030CF Calibration Frame provides a check on the proper operation of your Model 2030 and 2031 series flowmeters. The frame imparts a torsionally precise spin to the rotor and a count difference is noted in the flowmeter window. A minimum count is necessary for the flowmeter to be within calibration. The General Oceanics Model ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Calibration device inside 19? and 4U rack. Designed for automatic validation of results at different concentration levels. ZERO / Sample / Cylinder / ...
-
Manufactured by Binder Group GmbHbased in GERMANY
Calibration is a decisive success factor in the application of highly developed systems for the measurement and control of gases. To ensure best possible measurement and control accuracy, each VACOMASS® air distribution system and each COMBIMASS® flow meter is precisely calibrated in the CAMASS® Calibration ...
-
Manufactured by Binder Group GmbHbased in GERMANY
The patented COMBIMASS® flow conditioner are used in cases, where there is not sufficient inlet and outlet straight pipe run available ( see also DIN ISO 5167-1), to get in all flow situations a fully regular flow profile. Flow profile irregularities and swirls but also flow pulsations and backward influences of ...
-
Manufactured by Binder Group GmbHbased in GERMANY
The VACOMASS® elliptic diaphragm control valve is a technically optimized diaphragm control valve with an elliptical aperture for precise, lowpressureloss control and distribution of aeration air in wastewater treatment plants. It closes bubble-tight. For sensitive control of axial and tangential flows (e.g. after elbows) the flow axis ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Designed for automatic validation of results at different concentration levels ZERO / Sample / Cylinder / CALIB / dilution points by ...
-
Manufactured by RMA Fiventures Asia-Pacific Pte Ltd.based in SINGAPORE
The gas/LNG metering streams can be configured in the multiple operating and stand-by configuration. The ultrasonic/Coriolis/turbine/orifice flow meters are used in each stream for accurate flow measurement. Meter calibration at certified flow laboratory can be included under ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
We propose multiplexers (selection of multichannel samples) adapted to your installation and controlled by our software VISTACHROM. VISTACHROM can : "Cycle" methods to analyze different ranges on each stream. Transfer data via MODBUS, specific for each ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Designed for automatic validation of results at different concentration levels ZERO / Sample / Cylinder / CALIB / 4 dilution ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Singer Model 106-SPI-MV is a Single Point Insertion Electromagnetic Flow Meter, installed and calibrated in conjunction with a Singer Valve to provide an accurate flow rate that can be utilized with the metering valve as a stand alone option or built into a 106-2SC-PCO pilot system to provide complete ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The HTR rotating furnaces combine in a laboratory scale unit many of the advantages of a fluidised bed reactor with those of a rotary kiln. The sample is simultaneously heated and mixed under a controlled atmosphere. This overcomes the longer reaction times required in standard chamber or tube ...
-
Manufactured by Sierra Instruments, Inc.based in USA
For lab researchers and systems integrators/OEMs, the SmartTrak 50 is a true digital MFC and shares the same accuracy and repeatability as the flagship SmartTrak 100 with a few less features, slightly larger footprint, but more economical ...
-
Manufactured by Sierra Instruments, Inc.based in USA
Sierra's CalTrak 500 is an accurate primary standard gas flow calibrator for all inert ...
-
Manufactured by Sierra Instruments, Inc.based in USA
For lab researchers and systems integrators/OEMs, Sierra's flagship SmartTrak thermal mass flow controller is a true multi-gas digital MFC designed to deliver smooth, stable, accurate, and repeatable gas mass flow control you can rely on, every time. Unaffected by upstream gas temperature and pressure fluctuations, gas mass flow control is ...
-
Manufactured by Sierra Instruments, Inc.based in USA
High accuracy transit-time ultrasonic technology. Software apps for ease of installation & diagnostics. Optimized for thermal energy/BTU measurement. Clamp-on sensors, no pipe cutting, no shutdown. Real-time liquid density compensation. Upgrade meter firmware and software in the field. Part of Sierra's Big-3 iSeries family of flow ...
-
Manufactured by Sierra Instruments, Inc.based in USA
The CalTrak XL is the leading high-flow primary standard calibrator on the market today. The XL is used for calibration and verification of mass flow meters, controllers, variable area flow meters and precision in-situ calibration of industrial ...
-
Manufactured by Sierra Instruments, Inc.based in USA
Bring the world’s most accurate flow standard to your lab with the CalTrak 800. The 800 is used for calibration and verification of: Mass flow meters, Controllers, Variable area flow ...
-
Manufactured by QED Environmental Systems, Incbased in USA
With an innovative edge, the LANDTEC ACCU-FLO Meter highlights a distinctive feature: A Zero Calibration User Check. The User Check allows the operator to verify that their LANDTEC ACCU-FLO Meter has not shifted, drifted or deviated from its original NIST-traceable Factory Calibration value. This ability makes the ACCU-FLO ...
-
Manufactured by Sierra Instruments, Inc.based in USA
As today's science and engineering focuses more and more on micro technology, the requirement to be able to measure and control extremely low gas mass flow rates has become very ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you