flue gas Equipment available in St. Vincent & The Grenadines

Available in St. Vincent & The Grenadines| Near St. Vincent & The Grenadines
661 Results found

We couldn't find any flue gas equipment in St. Vincent & The Grenadines

Here is a list of results available in St. Vincent & The Grenadines

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: flue gas ×

  • Available in: Latin America ×

  • Available in: St. Vincent & The Grenadines ×


Model VCEM5100 - Flue Gas Flow Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The VCEM 5000/51000 represents the latest generation of CODEL’s uni ue flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime ...

Model GCEM4100 - Multi Channel Extractive Flue Gas Analyser

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The GCEM4100 is a hot extractive analyser for difficult flue gas monitoring applications. It uses infrared absorption spectroscopy to measure up to seven pollutant species in a single self-contained unit. Many conventional extractive systems require the sampled gas to be cleaned and dried to a very high standard prior to analysis, invariably ...

Model GCEM4000 - Multi-Channel In-Situ Flue Gas Analyser

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The GCEM4000 is a multi-channel flue gas analyser that uses Non-Dispersive Infrared Absorption (NDIR) technology. It provides high accuracy, low maintenance measurement of all the key combustion process emissions to atmosphere. It is capable of operating in very high dust loading conditions, up to several gm/m3 of dust. Its performance can be ...

Model GCEM40 - Single or Multi-Channel In-situ Flue Gas Analyser

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The GCEM40 series is the latest generation of CODEL’s world renowned in-situ monitors. Our development, knowledge and practical experience have been utilised to produce this advanced technology gas analyser which gives complete flexibility of use on process or emissions applications whilst delivering superb accuracy and repeatability at a ...

Model GCEM40 - Single or Multi-Channel In-situ Flue Gas Analyser

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The GCEM40 series is our latest generation of in-situ gas analysers. Designed for use primarily on combustion processes the analysers measure the key pollutants such as CO, NO, NO2, NOx, SO2, CH4, HCl, CO2 and H2O.

THERMOX - Model WDG-IVM/IQ - Smart Flue Gas Analyzers

by Ametek Process Instruments - THERMOX     based in Pittsburgh, PENNSYLVANIA (USA)

The WDG-IVM analyzer measures oxygen, combustibles and methane in natural gas-fired applications. It is ideal for gas-fired power boilers or for those using natural gas during start-up and shutdown. With this analyzer, you can monitor oxygen and combustibles for maximum fuel efficiency. In addition, the methane detector can be used for purge and ...

THERMOX - Model WDG-HPII Series - Flue Gas Oxygen Analyzer

by Ametek Process Instruments - THERMOX     based in Pittsburgh, PENNSYLVANIA (USA)

The WDG HPII Series offers a unique chimney-effect/convective sampling technology that incorporates the advantages of insitu probe high particulate sampling with high temperature and corrosion resistance of extractive analyzers. The HPII is ideal for combustibles and oxygen measurement on applications in cement and lime kilns, foundry and metals ...

THERMOX - Model WDG-IV - Flue Gas Oxygen Analyzer

by Ametek Process Instruments - THERMOX     based in Pittsburgh, PENNSYLVANIA (USA)

The WDG-IV analyzer measures oxygen, combustibles and methane in natural gas-fired applications. It is ideal for gas-fired power boilers or for those using natural gas during start-up and shutdown. With this analyzer, you can monitor oxygen and combustibles for maximum fuel efficiency. Available with Series 2000 controller or integrated /IQ ...

THERMOX - Model WDG Insitu Probe - Smart Flue Gas Oxygen Analyzer

by Ametek Process Instruments - THERMOX     based in Pittsburgh, PENNSYLVANIA (USA)

The Need: Modern gas, oil and coal fired boiler operations require dependable, low-maintanence, application flexible devices to monitor and control combustion processes. The measurement of excess oxygen in flue gas is particularly important for obtaining maximum combustion fuel efficiency while minimizing thermal or fuel-bound Nitrogen oxides ...

Gas Cooling and Drying System for Flue Gas Treatment

by Hofstetter BV     based in Schiphol-Rijk, NETHERLANDS

The gas temperature and moisture content is conditioned to the required level by cooling and condensation of the moisture in the gas. Depending on the required conditions air fin gas coolers or chiller systems are used to cool and condense the gas. After cooling/condensation the moisture droplets are removed from the gas with moisture ...

THERMOX - Model WDG 1200 Insitu - Flue Gas Oxygen Analyzer with Automatic Calibration & Modbus Output

by Ametek Process Instruments - THERMOX     based in Pittsburgh, PENNSYLVANIA (USA)

The WDG 1200 Insitu and the WDG 1210 Insitu are rugged, reliable flue gas analyzers for net oxygen that use industry-proven zirconium oxide sensor technology. The outer probe tube is 310 stainless steel so no abrasion shield is needed for most applications. The controller features precision temperature control for optimum stability, built-in ...

RASI - Model 300 - Flue Gas Analyser

by Eurotron Instruments (UK) Ltd. (EiUK)     based in Daventry, UNITED KINGDOM

The new RASI 300 is a compact flue gas analyser suitable for use on domestic gas, oil and wood fired boilers.

Model 1500 - Portable Flue Gas Analyze

by IMR Ingenieurgesellschaft für Mess- und Regeltechnik mbH     based in Neckarsulm, GERMANY

The IMR 1500 is calculates the average value from the obtained reults. Simultaneous display of 8 values on the brightly lit, 4-line display. Measured value display can be switched from ppm, mg, mg / reference (O2), mg / kWh. For use in process applications, the IMR 1500 can be equipped with an infrared sensor for the measurement of

Model 1300 - Handheld Flue Gas Analyzer

by IMR Ingenieurgesellschaft für Mess- und Regeltechnik mbH     based in Neckarsulm, GERMANY

The IMR 1300 is a compact handset with built-in printer. The bright backlit display and intuitive menus make operation of the instrument very easy. In addition to a case with magnetic mount the IMR 1300 is supplied in a carrying case with all necessary accessories.

KANE - Model 250 Series - Compact Flue Gas Analyser

by Kane International Ltd     based in Welwyn Garden City, UNITED KINGDOM

The KANE250 compact combustion analyser is suitable for all appliances burning natural gas, propane, butane, LPG and light oils and can also be used to accurately check CO levels in a room. Accurately measures O2, CO & temperature. Calculates CO2, CO/CO2 ratio & efficiency., date and time, all of which can be printed using the optional ...

Model A 550 L - Flue Gas Analyzer

by Wöhler     based in Bad Wünnenberg, GERMANY

As robust as cast iron, but as easy to operate as a smartphone – that's what Wöhler's new flue gas analyzer feels like in your hand. Appropriately, the advantages are equally substantial: A tip with your finger on the Wöhler A 550 is all that is required to perform analyses, inspections and settings on residential and commercial ...

Model 1100 - Handheld Flue Gas Analyzer

by IMR Ingenieurgesellschaft für Mess- und Regeltechnik mbH     based in Neckarsulm, GERMANY

The IMR 1100 is the smallest flue gas measuring device from IMR, The handy size, low weight and the logical and simple operation make the IMR 1100 the ideal instrument for chimney sweeps, heating contractors and burner servicing.In addition to a case with a magnetic mount the IMR 1100 is supplied in carrying case with all necessary accessories. A ...

IMR - Model 1400CO 2x CO-Sensors - Flue-Gas Analyzer For The Professional

by IMR Environmental Equipment, Inc.     based in St. Petersburg, FLORIDA (USA)

Measures: O2, CO-low (in ppm), CO-high (in %), draft/pressure; soot; Flue-gas and ambient temperature. Calculates:CO2, combustion efficiency, heat losses, excess air, CO corrected. Comes standard with gas-sampling probe, condensation trap, rugged case,battery, printer, Automatic CO-bypass-switch, serial interface, memory, 12VDC.

IMR - Model 500 - Portable Flue-Gas Dryer

by IMR Environmental Equipment, Inc.     based in St. Petersburg, FLORIDA (USA)

Permeation dryer. Comes with heated hose, gas-sampling probe, filter, rugged case.

cubic - Portable Flue Gas Analyzer

by Wuhan Cubic Optoelectronic Co., Ltd     based in Wuhan, CHINA

Function : Based on Micro-Flow NDIR technology. Measure SO2, NO, CO, CO2, O2, T, P, Flow simultaneously. No effect of H2O on the measure result of SO2 and NO. No constant flow requirement for SO2/NO/CO/CO2. Built-in pump Calculation of Lambda and combustion efficiency automatically. LCD 320 x 240 display, RS232 digital output

Need help finding the right suppliers?

Let the XPRTs do the work for you