flue gas Equipment in USA

436 Results found

Current filtering criteria

You can remove a filter by clicking on the x

Model VCEM5100 - Flue Gas Flow Monitor

by Codel International Ltd     Office in Keswick, PENNSYLVANIA (USA)

The VCEM 5000/51000 represents the latest generation of CODEL’s uni ue flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime ...

Model GCEM4100 - Multi Channel Extractive Flue Gas Analyser

by Codel International Ltd     Office in Keswick, PENNSYLVANIA (USA)

The GCEM4100 is a hot extractive analyser for difficult flue gas monitoring applications. It uses infrared absorption spectroscopy to measure up to seven pollutant species in a single self-contained unit. Many conventional extractive systems require the sampled gas to be cleaned and dried to a very high standard prior to analysis, invariably ...

Model GCEM4000 - Multi-Channel In-Situ Flue Gas Analyser

by Codel International Ltd     Office in Keswick, PENNSYLVANIA (USA)

The GCEM4000 is a multi-channel flue gas analyser that uses Non-Dispersive Infrared Absorption (NDIR) technology. It provides high accuracy, low maintenance measurement of all the key combustion process emissions to atmosphere. It is capable of operating in very high dust loading conditions, up to several gm/m3 of dust. Its performance can be ...

Model GCEM40 - Single or Multi-Channel In-situ Flue Gas Analyser

by Codel International Ltd     Office in Keswick, PENNSYLVANIA (USA)

The GCEM40 series is the latest generation of CODEL’s world renowned in-situ monitors. Our development, knowledge and practical experience have been utilised to produce this advanced technology gas analyser which gives complete flexibility of use on process or emissions applications whilst delivering superb accuracy and repeatability at a ...

Model GCEM40 - Single or Multi-Channel In-situ Flue Gas Analyser

by Codel International Ltd     Office in Keswick, PENNSYLVANIA (USA)

The GCEM40 series is our latest generation of in-situ gas analysers. Designed for use primarily on combustion processes the analysers measure the key pollutants such as CO, NO, NO2, NOx, SO2, CH4, HCl, CO2 and H2O.

THERMOX - Model WDG-HPII Series - Flue Gas Oxygen Analyzer

by Ametek Process Instruments - THERMOX     based in Pittsburgh, PENNSYLVANIA (USA)

The WDG HPII Series offers a unique chimney-effect/convective sampling technology that incorporates the advantages of insitu probe high particulate sampling with high temperature and corrosion resistance of extractive analyzers. The HPII is ideal for combustibles and oxygen measurement on applications in cement and lime kilns, foundry and metals ...

THERMOX - Model WDG-IVM/IQ - Smart Flue Gas Analyzers

by Ametek Process Instruments - THERMOX     based in Pittsburgh, PENNSYLVANIA (USA)

The WDG-IVM analyzer measures oxygen, combustibles and methane in natural gas-fired applications. It is ideal for gas-fired power boilers or for those using natural gas during start-up and shutdown. With this analyzer, you can monitor oxygen and combustibles for maximum fuel efficiency. In addition, the methane detector can be used for purge and ...

THERMOX - Model WDG-IV - Flue Gas Oxygen Analyzer

by Ametek Process Instruments - THERMOX     based in Pittsburgh, PENNSYLVANIA (USA)

The WDG-IV analyzer measures oxygen, combustibles and methane in natural gas-fired applications. It is ideal for gas-fired power boilers or for those using natural gas during start-up and shutdown. With this analyzer, you can monitor oxygen and combustibles for maximum fuel efficiency. Available with Series 2000 controller or integrated /IQ ...

THERMOX - Model WDG Insitu Probe - Smart Flue Gas Oxygen Analyzer

by Ametek Process Instruments - THERMOX     based in Pittsburgh, PENNSYLVANIA (USA)

The Need: Modern gas, oil and coal fired boiler operations require dependable, low-maintanence, application flexible devices to monitor and control combustion processes. The measurement of excess oxygen in flue gas is particularly important for obtaining maximum combustion fuel efficiency while minimizing thermal or fuel-bound Nitrogen oxides ...

GC - Powdered FG Activated Carbon For Flue Gas Treatment

by General Carbon Corp.     based in Paterson, NEW JERSEY (USA)

GC Powdered FG activated carbon is a virgin carbon. Derived from selected grades of bituminous coal, its surface area and pore volume make it ideal for use on flue gas applications, including the removal of mercury, dioxins, furans and other VOC compounds.

THERMOX - Model WDG 1200 Insitu - Flue Gas Oxygen Analyzer with Automatic Calibration & Modbus Output

by Ametek Process Instruments - THERMOX     based in Pittsburgh, PENNSYLVANIA (USA)

The WDG 1200 Insitu and the WDG 1210 Insitu are rugged, reliable flue gas analyzers for net oxygen that use industry-proven zirconium oxide sensor technology. The outer probe tube is 310 stainless steel so no abrasion shield is needed for most applications. The controller features precision temperature control for optimum stability, built-in ...

IMR - Model 1400CO 2x CO-Sensors - Flue-Gas Analyzer For The Professional

by IMR Environmental Equipment, Inc.     based in St. Petersburg, FLORIDA (USA)

Measures: O2, CO-low (in ppm), CO-high (in %), draft/pressure; soot; Flue-gas and ambient temperature. Calculates:CO2, combustion efficiency, heat losses, excess air, CO corrected. Comes standard with gas-sampling probe, condensation trap, rugged case,battery, printer, Automatic CO-bypass-switch, serial interface, memory, 12VDC.

Model A 550 L - Flue Gas Analyzer

by Wöhler     Office in MASSACHUSETTS (USA)

As robust as cast iron, but as easy to operate as a smartphone – that's what Wöhler's new flue gas analyzer feels like in your hand. Appropriately, the advantages are equally substantial: A tip with your finger on the Wöhler A 550 is all that is required to perform analyses, inspections and settings on residential and commercial ...

IMR - Model 500 - Portable Flue-Gas Dryer

by IMR Environmental Equipment, Inc.     based in St. Petersburg, FLORIDA (USA)

Permeation dryer. Comes with heated hose, gas-sampling probe, filter, rugged case.

IPEX System 636 - Flue Gas Venting Systems

by IPEX     Office in New Baltimore, MICHIGAN (USA)

IPEX offers complete certified systems of pipes, fittings and cements meeting the stringent demands of the ULC S636 venting standard. All with the quality, performance and support you’ve come to expect from IPEX.

Model BA 2000 / BA 2000-MF / BA 2000-SE - Oxygen Flue Gas Analyzer

by Bühler Technologies GmbH     Office in Frankfort, ILLINOIS (USA)

In combustion applications such as process heaters, steam generation boilers or furnaces, the amount of air needed to reach optimum system efficiency can vary rapidly. The optimum heat rate for these units, which may lie within narrow limits, can be achieved with the BA2000.

Model 3 - Flue Gas Analyzer

by Clean Air Engineering, Inc.     based in Palatine, ILLINOIS (USA)

Clean Air Express gas Analyzer rapidly analyzes gas mixtures, specifically to determine carbon dioxide, oxygen and carbon monoxide.

Flue Gas Desulphurisation System

by KC Cottrell, Inc     based in The Woodlands, TEXAS (USA)

KC Cottrell is able to offer FGD technology for large process applications such as power stations, steel works, and chemical plants. This high efficiency, low cost, limestone to gypsum process is well proven and is operational on many large boiler units worldwide

Hitachi - Flue Gas Desulfurization (FGD)

by Hitachi Power Systems America, Ltd. (HPSA)     based in Basking Ridge, NEW JERSEY (USA)

A global company with over 30 years experience in power generating station air quality control improvements including 73 (6 in the US) wt FGD projects worldwide. Environmental control is an ongoing challenge and we are determined to further our discoveries. Our R&D laboratories are focused on delivering emission control solutions for today and ...

Flue Gas Silencers

by BBM-CPG Technology, Inc.     based in Laurens, SOUTH CAROLINA (USA)

BBM Akustik Technologie, Germany is the world’s leading supplier  for  flue-gas  silencers.  We  supply  the  whole  range  of  silencers behind the gas turbine and for all kind of boilers. BBM Akustik  Technologie  has  executed  several  hundred  projects ...

Need help finding the right suppliers?

Let the XPRTs do the work for you