Showing results for: Flue Gas Equipment In Colorado
-
Manufactured by Advanced Emissions Solutions, Inc. (ADES)based in USA
ADA® RESPond® Flue Gas Conditioning (FGC) is a highly effective surface ash resistivity modifier for power plants operating cold-side ESPs requiring FGC. Replacing SO3 FGC with RESPond® FGC Technology not only supports opacity and particulate emissions compliance, it also reduces the costs of mercury control as well as the ...
-
PremiumManufactured by ENVEAbased in FRANCE
Flue gas flowmeter for continuous measurement of gas velocity, temperature and pressure in exhaust gas ducts (chimneys or flue pipes). Micro-Venturi technology. The StackFlow 100 is a compact flowmeter for continuous measurement of velocity, temperature and static pressure in exhaust gas ducts ( ...
-
PremiumManufactured by ENVEAbased in FRANCE
The PCME STACKFLOW 400 is an advanced flue gas flow measurement system for continuous monitoring of releases from industrial sources complying with European monitoring standard EN 16911-2:2013 and ...
-
Manufactured by Advanced Emissions Solutions, Inc. (ADES)based in USA
This product has been optimized for flue gas mercury capture. It incorporates advanced halogen treatment to improve the oxidation of mercury. Its use is recommended in certain challenging applications including low-halogen flue gases when conventional halogenated Powdered Activated Carbons are ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
Our FGD treatment system integrates physical and chemical processes to provide reliable performance in a wide range of operating conditions without modification. The high-rate DensaDeg® Clarifier/Thickener can be used to upgrade an existing electric power generating plant for effortless permitting. Mixing, solids recirculation, sludge thickening and clarification are combined in single compact ...
-
PremiumManufactured by ENVEAbased in FRANCE
The STACKFLOW 200 uses the wellestablished Averaging Pitot sensor technology to provide continuous emission monitoring of Flow, Temperature and Pressure. Utilised as a standalone sensor or in combination with Environnement S.A & PCME analyzers and controllers for the monitoring of particulates, gases and flue gas as part of a larger ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
The use of plastic venting systems on gas fired water heaters, furnaces and boilers has undergone a significant change. CSA B149.1 Natural Gas and Propane Installation Code now requires all special venting material to be certified to ULC S636 across Canada. IPEX addressed this market need with System 636, a fully certified flue ...
-
Manufactured by CECO Environmentalbased in USA
Our Burgess-Aarding brand Flue Gas Silencer is custom-designed to reduce noise levels of exhaust and heat recovery steam generator (HRSG) systems to meet stringent environmental standards. Whether the Flue Gas Silencer is mounted in a silencer duct, a hot or cold stack, or has to be able to operate in high flue ...
-
Manufactured by CECO Environmentalbased in USA
Flue Gas Recirculation (FGR) is a powerful nitrogen oxide (NOx) control technique that significantly reduces NOx emissions by recirculating flue gases from the boiler exhaust duct into the main combustion chamber. This process reduces peak flame temperature and lowers the percentage of oxygen in the combustion air/flue ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
WDG-HPII Series analyzers offer unique chimney-effect/convective sampling technology that combines the advantages of insitu probe high-particulate sampling with the high temperature and corrosion resistance of extractive analyzers. With a high-particulate filter and weatherproof sensor enclosure, the analyzer is ideal for measurements of O2, combustibles and methane, and is completely field ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Completely field serviceable, the WDG Insitu is a direct-sensing oxygen (O2) probe suitable for applications where the flue gas temperature does not exceed 800oC (1472oF). With a range of different probe lengths offered, its unique inner/outer probe design enables the removal of cell, heater and thermocouple assembly through the probe head. ...
-
Manufactured by IPEX - an Aliaxis Companybased in CANADA
The use of plastic venting systems on gas fired water heaters, furnaces and boilers has undergone a significant change. CSA B149.1 Natural Gas and Propane Installation Code now requires all special venting material to be certified to ULC S636 across Canada. IPEX addressed this market need with System 636, a fully certified flue ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The CMFA-P2000 (Combustion Mix Flue Gas Analyzer) is a portable combination premix and flue gas analyzer, specifically designed to meet the dual furnace combustion of glass container manufacturing plants. Two analyzers in one, the CMFA-P2000 is a portable solution designed to measure both excess oxygen and excess fuel in ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The WDG 1200/integral electronics Insitu and the WDG 1210/remote electronics Insitu are rugged, reliable flue gas analyzers that use trusted zirconium oxide sensor technology for net oxygen (O2) measurements. The unique sensor design allows the entire sensor assembly, including the heater, to be removed without disturbing the outer protection ...
-
Manufactured by Advanced Emissions Solutions, Inc. (ADES)based in USA
Powdered activated carbon (PAC) is our standard product for mercury capture in halogen-containing flue gas. Use this product when you are firing high chlorine containing coals, or in conjunction with coal or flue gas additives for the oxidation of ...
-
PremiumManufactured by ENVEAbased in FRANCE
Ideal for mid-high to high concentrations or for sampling locations in hazardous areas. The flue gas is extracted, filtered & diluted with clean / dry air, by an in-stack dilution probe, before being sent to the analyzer. This technique lowers the flue gas dew point, keeping the sample temperature above it and at ambient ...
-
Manufactured by Advanced Emissions Solutions, Inc. (ADES)based in USA
Powdered activated carbon designed for rapid dispersion and slow settling in a wet flue gas desulfurization (wFGD) unit. PowerPAC WS adsorbs mercury into the pore of the PAC for permanent removal from the ...
-
Manufactured by Advanced Emissions Solutions, Inc. (ADES)based in USA
This halogenated powdered activated carbon begins with our PowerPAC technology and adds a halogen to promote mercury oxidation. It is specifically designed for flue gas mercury capture in low-halogen applications such as powder river basin coals, lignite coals, and ...
-
Manufactured by Advanced Emissions Solutions, Inc. (ADES)based in USA
This high-quality powdered activated carbon (PAC) is our standard product for mercury capture in halogen-containing flue gas. Various properties including pore structure, particle size and shape, moisture and mineral content, have been optimized for mercury capture and sequestration. Use this product when you are firing high chlorine ...
-
Manufactured by Advanced Emissions Solutions, Inc. (ADES)based in USA
This patented non- brominated carbon is produced from coal and lignite feedstock’s that have shown to produce the most effective activated carbons in full-scale testing at power plants. It has been designed to enhance the kinetics of the capture of mercury in flue gas of units burning all fuels and high halogen content with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you