flue gas scrubber Equipment available in Prince Edward Island

Available in Prince Edward Island| Near Prince Edward Island
75 Results found

We couldn't find any flue gas scrubber equipment in Prince Edward Island

Here is a list of results available in Prince Edward Island

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: flue gas scrubber ×

  • Available in: Canada ×

  • Available in: Prince Edward Island ×

Model 9500 Series - Spray Tower Acid Gas Scrubber

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

Specifically designed to treat acid gas emissions from particulate laden combustion flue gas, the Series 9500 Spray Tower Srubber is an extremely simple acid gas scrubber device capable of over 98% control efficiency. The scrubber consists of a fully open vertical vessel fitted with banks of hydraulic atomized spray nozzles. Nozzles feature an ...

BFCS - Bionomic Forced Condensation Scrubbing System

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

The highly advanced Bionomic Forced Condensation Scrubbing System (BFCS) uses the principles of nature’s rain and particle growth mechanism to achieve dramatic improvements in collection of submicron particulate over conventional hot gas wet cleaning systems. In addition, secondary acid gas pollutants are also easily removed with the BFCS ...

Particulate Scrubber for Industrial Emissions Control

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

Wet particulate scrubbers can be used to separate particulate from a flue gas stream, thereby reducing particulate emissions. B&W MEGTEC offers wet particulate scrubbers, including B&W’s Turbulaire® and Microdyne scrubber designs and the TurboVenturi scrubber to control emissions from many industrial process operations, including ...

Tekran - Model 3300Xi - Mercury Continuous Emission Monitor

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The EPA Electric Generating Unit Mercury and Air Toxics (EGU MATS) and Portland Cement Maximum Achievable Control Technology (PC MACT) regulations require reductions in gaseous mercury emissions. Tekran has proven technology to support mercury compliance monitoring, abatement system optimization, and performance audit testing instrumentation.

Scrubber Systems

by Götaverken Miljö AB, part of Babcock & Wilcox Vølund A/S     based in GÖTEBORG, SWEDEN

Our first scrubber systems went into operation in 1988. Since then we have delivered a great many, chiefly for cleaning and/or condensing flue gases generated by the incineration of waste. Combining several process stages in our patented multi-stage scrubbers reduces space requirements, and our integrated circulation tanks minimize energy ...

Wet Scrubber

by Santes Ltd. Co.     based in Temelli, TURKEY

Wet scrubbers are used to absorb soluble gases into water or other liquids such as solutions and to remove particulates from gas streams by contacting with water or other liquid. The flue-gas flow is fed into water, hydrogen peroxide, or/and a washing solution containing part of the reagent (e.g. sodium hydroxide solution). In order to eliminate ...

Condensing Scrubbers

by Götaverken Miljö AB, part of Babcock & Wilcox Vølund A/S     based in GÖTEBORG, SWEDEN

Condensing scrubbers can be made as stand-alone units or for integration in our multi-stage scrubber concept. In their standard design they are made from GRP (glass reinforced plastic). They have the great advantage of not suffering corrosion in ways that condensers made from metal do, and they are thus not so sensitive to short or long periods ...

Dry Scrubber

by Santes Ltd. Co.     based in Temelli, TURKEY

In dry scrubber the absorption agent (usually lime or sodium bicarbonate) is fed into the reactor as a dry powder. In the reactor, gaseous pollutants are absorbed by the agent. The dose rate of reagent may depend on the temperature as well as on reagent type. In the design of SANTES Flue Gas Treatments, generally sodium bicarbonate is used as the ...


Instrumatic OXYDAN - Model DPIII/79x - Stack Gas Dilution Sampling Probe

by Instrumatic A/S     based in Ry, DENMARK

Instrumatic is a world leader in design and manufacture of exhaust gas dilution probe systems. In compliance with Environmental Protection Administrations and tested by International Association of Instruments Users SIREP-WIB-EXERA 1993.No matter how good or precise the analyzer/sensor are the result never better than the sample provided to the ...

Mel Wet Systems

by Carmeuse Lime     based in Pittsburgh, PENNSYLVANIA (USA)

In the MEL process, lime reagent, containing calcium hydroxide (Ca(OH)2) and magnesium hydroxide (Mg(OH)2), is used to react with the SO2.  As with the LSFO process, the hydroxide slurry is added to the recycle tank to replenish reagent consumed under pH control of 6 to 7.

Dry Scrubbing Systems

by Carmeuse Lime     based in Pittsburgh, PENNSYLVANIA (USA)

Spray Dryer Absorption (SDA) is a dry scrubbing process that is generally used for low-sulfur coal. SDA FGD systems are typically located after the air preheaters, and the waste products are collected either in a baghouse or electrostatic precipitator. However, to achieve sulfur dioxide (SO2) reduction above 80% with good reagent use, the dry ...

Baghouse Filter Systems

by Götaverken Miljö AB, part of Babcock & Wilcox Vølund A/S     based in GÖTEBORG, SWEDEN

We have installed baghouse filter systems in installations for the incineration of both municipal and environmentally hazardous waste in biofuel-fired installations and applications within the mining industry. The primary purpose of baghouse filter systems is usually the removal of dust and, by introducing an additive, the removal of acidic ...

Heat Pumps

by Götaverken Miljö AB, part of Babcock & Wilcox Vølund A/S     based in GÖTEBORG, SWEDEN

Götaverken Miljö has installed a great number of heat pumps over the years. Our early references include some of the largest turbo compressor heat pumps in the world (at Ryaverket in Gothenburg). We have installed both compressor and absorption heat pumps connected to the flue gas cleaning systems at waste incineration plants. In recent ...

MERCOX - Mercury Removal System

by Götaverken Miljö AB, part of Babcock & Wilcox Vølund A/S     based in GÖTEBORG, SWEDEN

Mercury is often emitted from thermal treatment installations during brief periods creating extremely high mercury concentration spikes in untreated flue gases. Many traditional flue gas cleaning systems have limited buffer capacity, which means such concentrations cannot be reduced as much as desired. In such cases, or in applications in which ...

Wahlco - Flue Gas Conditioning Systems

by Wahlco, Inc.     based in Santa Ana, CALIFORNIA (USA)

Flue gas conditioning is Wahlco's traditional core business and the product line which formed the basis of the company's founding. FGC systems allow coal fired boilers to burn a wider variety of coals, including lower cost high ash coals and low sulfur coals which avoid the cost of scrubber installations, without affecting the performance of the ...

Steuler - Flue Gas Desulphurisation Technology

by Steuler Anlagenbau GmbH & Co. KG     based in Hoehr-Grenzhausen, GERMANY

Steuler Plant Construction is constantly working on further developments to its tried-and-tested flue gas desulphurisation process. Until now, it has usually been reserved for use in large-scale plants, but Steuler's work has now enabled its technical application to smaller and medium-sized production stages. This resolute approach has turned ...

Filcon Filtration - Hot Flue Gas Cleaning Equipment

by Filcon Filtration ApS     based in Slagelse, DENMARK

Hot flue gas cleaning equipment; To help keep our environment clean, Filcon Filtration specializes in the treatment of hot flue gas. Hot flue gas can be generated from biomass, gasification, and/or incinerator plants, and might contain high concentrations of chemical particles which are harmful for humans and the environment. Filcon flue gas ...

Krauss-Maffei - Model VZU-Gypsum - Vertical Peeler Centrifuge

by ANDRITZ Separation - a division of the Andritz Group     based in Graz, AUSTRIA

The Krauss-Maffei VZU-G gypsum centrifuge is most suitable for desulfurization of flue gases from coal-fired heat/ power plants, waste incinerators, and copper smelters. Washing the flue gas with limestone slurry is the most successful method and generates reusable gypsum.

Krebs - Flue Gas Desulfurization Cyclones for Power Applications

by FLSmidth KREBS     based in Tucson, ARIZONA (USA)

KREBS Flue Gas Desulfurization (FGD) Cyclones: Used to classify limestone ball mill discharge in the reagent preparation area of wet flue gas desulfurization (WFGD) scrubbers in coal fired power plants.

Hamon - Wet Gas Scrubbers

by Hamon USA     based in Somerville, NEW JERSEY (USA)

While many systems can be used to obtain particulate and sulfur oxide reductions, not all systems are created equal. The following sections outline a number of key factors, which make the ExxonMobil Wet Gas Scrubber as supplied by Hamon Research Cottrell the best choice for FCCU emissions control:

Related Terms for flue gas scrubber

Need help finding the right suppliers?

Let the XPRTs do the work for you