Showing results for: Flue Gas Scrubber Equipment Near Syria
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 approved ProScatterTM particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams. Continuous Particulate Monitoring for saturated wet stack applications typically found after wet scrubbers, wet electrostatic precipitators and wet flue gas desulphurisation ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's FIRECAT Thermal Oxidizers are simplest combustion devices that uses natural draft or forced draft burners and designed to maintain a specific destruction temperature and residence time to ensure thorough destruction efficiencies (98-99.99%). A FIRECAT system precisely monitors and controls the flow of air, assist gas, in order to ...
-
Manufactured by Muntersbased in USA
The streamlined separator profiles deflect the droplet laden gas stream; as a result the momentum of the droplets causes them to impinge onto the profile surface. The droplets coalesce together and form a liquid film, draining back down under the influence of gravity. Target applications FGD absorbers (Flue Gas Desulphurization) Vertical ...
-
Manufactured by Muntersbased in USA
The DH 2100-FGD (T 100) is a vane type droplet separator for horizontal gas flow. The DH2100-FGD with the panel design was first used in horizontal downstream ducts of FGD absorber towers. Most of the times an automated cleaning system is installed. This not only increases the lifetime of the entire system it also decreases the ...
-
Manufactured by CR Clean Air Group, LLCbased in USA
Mercury in flue gas exists as gas-phase elemental mercury (HgO) and oxidized or ionic form of mercury, such as mercuric chloride, HgCl2 (HgII+) or mercuric oxide (HgO). Speciation (oxidation state) of the mercury influences the effectiveness of various control technologies and whether the mercury is deposited locally or transported over ...
-
Manufactured by Santes Incineratorbased in TURKEY
In dry scrubber the absorption agent (usually lime or sodium bicarbonate) is fed into the reactor as a dry powder. In the reactor, gaseous pollutants are absorbed by the agent. The dose rate of reagent may depend on the temperature as well as on reagent type. In the design of SANTES Flue Gas Treatments, generally sodium bicarbonate is ...
-
Manufactured by Santes Incineratorbased in TURKEY
Wet scrubbers are used to absorb soluble gases into water or other liquids such as solutions and to remove particulates from gas streams by contacting with water or other liquid. The flue-gas flow is fed into water, hydrogen peroxide, or/and a washing solution containing part of the reagent (e.g. sodium hydroxide solution). In ...
-
Manufactured by Addfield Environmental Systems Limitedbased in UNITED KINGDOM
The Addfield wet scrubber system is primarily designed as particle suppressant system, ideally suited to high capacity incineration machines. Heavy particulates are removed from the exhaust gas using water injected from the roof of the scrubber system. This bolt on system can be added to any incineration machine in the Addfield range and is ...
-
Manufactured by TREMA Verfahrenstechnik GmbHbased in GERMANY
Flue gas conditioning. Production of diverse powders of a defined particle size. Single- or dual media nozzle atomizers or rotary wheel atomizers. Zero-effluent flue gas cleanup. Evaporation of scrubber effluents to produce a dry residue suitable for land ...
-
Manufactured by Igniss Energybased in POLAND
Scrubbing is flue gas treatment of poluted flue gases by chemical reaction, like gasses from incineration processes are chemically treated before leaving the chimney. When water (and for example caustic soda - NaOH) is used to clean the flue gas, it is called "wet scrubbing". When there is no water present, the ...
-
Manufactured by ATS - Air Treatment System Srlbased in ITALY
The scrubbers use the principle of absorption of the pollutants in the liquid phase. The gases pass, in countercurrent, through plates of different types or filling bodies fed by acidic or alkaline washing fluids. The scrubber is used as a finisher in order to reach very high level of neutralization or to remove micro-pollutants (Hg; ...
-
Manufactured by Tip Top Oberflachenschutz Elbe Gmbhbased in GERMANY
TIP TOP Elbe has developed rubber linings for all industrial sectors. The rubber linings can be used on site regardless of the component size. Our on-site rubber linings offer superior protection for storage vessels, pipelines, reaction vessels, flue gas scrubbers, but also for concrete components like septic tanks, deionising and ...
-
Manufactured by Tip Top Oberflachenschutz Elbe Gmbhbased in GERMANY
Workshop rubber linings offer excellent protection for components which fit inside an autoclave and can be transported, such as pipelines, flue gas scrubbers, quenching towers, venturi scrubbers, filter cases, storage vessels, reaction and pickling lines, centrifuges, road and railway tanks, containers, pumps and fittings, and ...
-
based in SWITZERLAND
Incineration of wastes releases pollutants, which are often found in flue gas. CTU Clean Technology Universe AG (CTU) offers ecological and economical gas cleaning solutions for: Municipal solid waste incineration plants, Hazardous waste incineration plants, RDF (refuse derived fuel) power plants, Pyrolysis plants, Gasification ...
-
based in SWITZERLAND
Chemical and other production processes release a wide variety of contaminated residues such as: Exhaust air and off gases, effluents and waste solvents, sludge and solid ...
-
Manufactured by Dürr Systems AG - Clean Technology Systemsbased in GERMANY
EcopureFGA Scrubbing Systems can be used to remove gaseous inorganic pollutants and particles from flue gases downstream of a thermal ...
-
Manufactured by AS Tamultbased in ESTONIA
Nowadays clean energy production includes many technological possibilities to meet environmental regulations. Tamult supplies for your needs suitable customized cleaning solutions to control air emissions. We can offer products for dry and wet flue gas cleaning, cleaning with heat recovery from flue gases – scrubbers, ...
-
Manufactured by VUM GmbHbased in GERMANY
Our company develops, plans and supplies gas scrubbers for the absorption and dedusting of organic and inorganic components of a gas to the values required for further processing of a gas stream and/or for compliance with official ...
-
Manufactured by Likusta Umwelttechnik GmbHbased in GERMANY
Purification of process waste gas based on the absorption principle; With absorption (scrubbing), water-soluble substances are absorbed or dissolved from the waste gas in a liquid by physical-chemical means. For this purpose, the gas stream is brought into contact with a liquid stream. Using absorption, solid, liquid or gaseous substances ...
-
Manufactured by Liku-Tech Environmental Solutions India Pvt Ltd.based in INDIA
Liku-Tech / Likusta Umwelttechnik GmbH - Germany offers Chemical based wet Scrubbers that are efficiently and effectively designed to remove gas pollutants. Often these pollutants are chemicals such as hydrogen sulfide, ammonia, chlorine or sulfur compounds. Chemical Scrubbers work by dissolving or absorbing the pollutant into the scrubbing ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you