Showing results for: Flue Gas Scrubber Equipment Near Indiana
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's FIRECAT Thermal Oxidizers are simplest combustion devices that uses natural draft or forced draft burners and designed to maintain a specific destruction temperature and residence time to ensure thorough destruction efficiencies (98-99.99%). A FIRECAT system precisely monitors and controls the flow of air, assist gas, in order to ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 approved ProScatterTM particulate CEM for the extractive sampling and measurement of particulate in saturated wet gas streams. Continuous Particulate Monitoring for saturated wet stack applications typically found after wet scrubbers, wet electrostatic precipitators and wet flue gas desulphurisation ...
-
Manufactured by Aira 4matic Valve Automationbased in USA
The butterfly or wafer damper can be a stack damper where sealing or tight shut-off is not all-important. This type is used as an isolating damper for flue-gas scrubbers. The butterfly damper is lightweight, simple, quickly actuated and often comparatively low in cost. In process work, oval shapes adapt to that shape of duct. ...
-
Manufactured by PureFlex, Inc.based in USA
PureFlex Series 890 Butterfly Valve bodies are manufactured from Derakane 411/470 vinyl ester reinforced with ECR glass fiber in a proprietary process developed by PureFlex providing outstanding corrosion resistance to thousands of media. The Lug and Full-Face 890 valves offer full flange support in FRP and light gauge metal piping ...
-
Manufactured by Muntersbased in USA
The streamlined separator profiles deflect the droplet laden gas stream; as a result the momentum of the droplets causes them to impinge onto the profile surface. The droplets coalesce together and form a liquid film, draining back down under the influence of gravity. Target applications FGD absorbers (Flue Gas Desulphurization) Vertical ...
-
Manufactured by Muntersbased in USA
The DH 2100-FGD (T 100) is a vane type droplet separator for horizontal gas flow. The DH2100-FGD with the panel design was first used in horizontal downstream ducts of FGD absorber towers. Most of the times an automated cleaning system is installed. This not only increases the lifetime of the entire system it also decreases the ...
-
Manufactured by Dürr Systems AG - Clean Technology Systemsbased in GERMANY
EcopureFGA Scrubbing Systems can be used to remove gaseous inorganic pollutants and particles from flue gases downstream of a thermal ...
-
Manufactured by ProChem Incorporatedbased in USA
and consumables, and operational services. Each KLeeNwater system is custom-tailored to the solution specific to the customer’s needs. It is ideal for decreasing the load on evaporators at combined cycle facilities, flue gas scrubber wastewater treatment, and ash pond water ...
-
Manufactured by CR Clean Air Group, LLCbased in USA
Mercury in flue gas exists as gas-phase elemental mercury (HgO) and oxidized or ionic form of mercury, such as mercuric chloride, HgCl2 (HgII+) or mercuric oxide (HgO). Speciation (oxidation state) of the mercury influences the effectiveness of various control technologies and whether the mercury is deposited locally or transported over ...
-
Manufactured by Marsulex Environmental Technologies (MET)based in USA
Known around the globe for solid and innovative air quality control technologies, MET's advanced circulating dry scrubber flue gas desulfurization (CDS-FGD) system provides the proper chemistry and conditions to simultaneously and effectively absorb sulfur dioxide, acid gases and associated heavy metals. This advanced, multi-pollutant ...
-
Manufactured by Belco Manufacturing Inc.based in USA
Belco Manufacturing Inc. has been delivering the highest-quality Fiberglass Reinforced Plastic (FRP) piping products for over 30 years. We design and manufacture custom, pre-fabricated fiberglass pipe and Ershigs Stopline-G2 abrasion-resistant piping systems for a wide variety of industries, such as chemical processing, pulp & paper, metal and mining, water, and ...
-
Manufactured by Galvanic Applied Sciences Inc.based in CANADA
Galvanic’s AccuSeries - LPA are rugged on-line wet chemical analyzers. Multi-stream and multi-parameter methods offer customers an unbeatable price to performance ratio. The modular design, narrow footprint, and Class 1, Div. 2 certification simplifies installation and maintenance. Wetted parts are individually selected to provide the best compatibility with customer’s samples. ...
-
Manufactured by Addfield Environmental Systems Limitedbased in UNITED KINGDOM
The Addfield wet scrubber system is primarily designed as particle suppressant system, ideally suited to high capacity incineration machines. Heavy particulates are removed from the exhaust gas using water injected from the roof of the scrubber system. This bolt on system can be added to any incineration machine in the Addfield range and is ...
-
Manufactured by Recycling Kombinatie REKO B.V.based in NETHERLANDS
burns and forms sulphur oxide. To remove this sulphur oxide, REKO opted for a so-called wet flue gas scrubber, in which the sulphur oxide is converted into gypsum by using lime. For some time now, REKO has been supplying the gypsum produced to the gypsum processing industry, which uses it to make plasterboard and anhydrite. These products are ...
-
Manufactured by Dutch Incinerators BVbased in NETHERLANDS
Removal of harmful contaminants in the flue gas is done in three steps: gas cooling, reagent injection and filtering. The scrubbing system include a dosing mechanism for additive(s), reaction and residence chamber and a bag filter for final dust ...
-
Manufactured by Dutch Incinerators BVbased in NETHERLANDS
Catalytic Fabric Filter Bags for Dry Flue Gas Treatment. A catalytic fabric filter bag consists of different fabric layers, whereas each layer contains a unique long life catalyst to decompose and remove multiple gaseous ...
-
Manufactured by Dutch Incinerators BVbased in NETHERLANDS
Flue gas emissions should be monitored on a continuous basis to ensure that final emissions constantly comply with the applicable regulations. A Continuous Emission Monitoring System (CEMS) permanently measures typical emission parameters e.g. SO2, HCl, NOx, HF, CO, O2, H2O, CO2, TOC, particulate matter, opacity and more components. ...
-
Manufactured by Dutch Incinerators BVbased in NETHERLANDS
A combination of dry and wet flue gas treatment might be the best choice in specific cases. It results in the most optimum emission reduction solution, as the advantages and disadvantages of each option will be balanced and ...
-
Manufactured by Dutch Incinerators BVbased in NETHERLANDS
The choice of which additive to use, depends on the type of waste and contaminants to be removed. Operating costs could be considered as ...
-
Manufactured by Dutch Incinerators BVbased in NETHERLANDS
Flue gas is funneled through an area and sprayed with a wet substance. Water is used as circulation fluid when dust and particulate matter is to be removed, but chemicals can be added for heavier pollutants. As flue gases pass through the cleaning mist, contaminants are attracted to the mist and pulled out from the flue gases and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you