We couldn't find any flue gas treatment equipment suppliers or service providers located in Kuwait

Here is a list of equipment results with suppliers serving Kuwait

flue gas treatment Equipment available in Kuwait

  • Flue Gas Treatment systems

    Typically flue gas treatment systems are required when particulates and other gaseous pollutants are required to be removed from exhausts. Such pollutants include acid gases (such as SO2, HCl, etc.), heavy metals (such as mercury) and dioxins. Typically such pollutants are created by the conversion of waste or biomass into energy. Under such cir

    By Lodge Cottrell Ltd based in Halesowen, UNITED KINGDOM.

  • Flue Gas Treatment Systems

    Typically flue gas treatment systems are required when particulates and other gaseous pollutants are required to be removed from exhausts.Such pollutants include acid gases (such as SO2, HCl, etc.), heavy metals (such as mercury) and dioxins. Typically such pollutants are created by the conversion of waste or biomass into energy.

    By Lodge Cottrell Ltd based in Halesowen, UNITED KINGDOM.

  • Flue Gas Treatment Products

    Redecam’s complete product portfolio, coupled with our experts’ technological know-how, allow us to tackle the most challenging flue gas treatment (FGT) issues, allowing you to reach your emissions reduction requirements in an efficient, cost-effective and rapid manner. Based on the required abatement percentage(s), we will design ...

    By Redecam Group S.r.l. based in Sesto San Giovanni MI, ITALY.

  • Gas Cooling and Drying System for Flue Gas Treatment

    The gas temperature and moisture content is conditioned to the required level by cooling and condensation of the moisture in the gas. Depending on the required conditions air fin gas coolers or chiller systems are used to cool and condense the gas. After cooling/condensation the moisture droplets are removed from the gas with moisture ...

    By Hofstetter BV based in Schiphol-Rijk, NETHERLANDS. from Gas Treatment Product line

  • Sorbacal - Model HSH - Single-Pass Dry Flue Gas Treatment

    Sorbacal HSH is a calcium hydroxide specifically developed for the single-pass dry flue gas treatment. It differs from Sorbacal H with a higher specific surface area (SSA): 15-18 m²/g for Sorbacal H and 25 m²/g for Sorbacal HSH. Sorbacal HSH was developed for the specifications of the Brazilian market and is produced in Brazil today.

    By Lhoist Group based in Limelette, BELGIUM. from Exhaust Gas Treatment Product line

  • Premium

    Tekran - Model 3300Xi HgCEM - Mercury Continuous Emission Monitor

    The EPA Electric Generating Unit Mercury and Air Toxics (EGU MATS) and Portland Cement Maximum Achievable Control Technology (PC MACT) regulations require reductions in gaseous mercury emissions. Tekran has proven technology to support mercury compliance monitoring, abatement system optimization, and performance audit testing instrumentation.

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA). from Flue Gas CEM Product line

  • Premium

    THERMOX - Model WDG-IVM/IQ - Smart Flue Gas Analyzers

    The WDG-IVM analyzer measures oxygen, combustibles and methane in natural gas-fired applications. It is ideal for gas-fired power boilers or for those using natural gas during start-up and shutdown. With this analyzer, you can monitor oxygen and combustibles for maximum fuel efficiency. In addition, the methane detector can be used for purge and ...

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from THERMOX Product line

  • Model HZI - Condensing Scrubber

    In addition to the advantages of the Inova Wet Scrubber, the Condensing Scrubber allows additional heat recovery by means of condensation of the water vapour contained in the flue gas. This allows overall EfW plant energy efficiencies of up to 100% or more (on a Lower Heat Value basis). Energy recovered from the condensing scrubber is at a ...

    By Hitachi Zosen Inova AG based in Zurich, SWITZERLAND. from Flue Gas Treatment Product line

  • Wet Scrubber

    Wet scrubbers are used to absorb soluble gases into water or other liquids such as solutions and to remove particulates from gas streams by contacting with water or other liquid. The flue-gas flow is fed into water, hydrogen peroxide, or/and a washing solution containing part of the reagent (e.g. sodium hydroxide solution). In order to eliminate ...

    By Santes Ltd. Co. based in Temelli, TURKEY. from Flue Gas Treatment Product line

  • Model HZI - Semi Dry Scrubber

    The HZI SemiDry process employs the principle of the circulating fluidized bed for efficient removal of acid gases by adsorption with hydrated lime. Recirculation of reagent maximizes reagent use and provides excess reagent to capture contaminat peaks. In addition, activated carbon or coke can be injected for removal of volatile organics and ...

    By Hitachi Zosen Inova AG based in Zurich, SWITZERLAND. from Flue Gas Treatment Product line

  • Bag Filter

    In dry sorption processes the absorption agent (activated carbon) is fed into the reactor as a dry powder. The dose rate of activated carbon may depend on the temperature as well as on reagent type and brand. The reaction products generated are solid and need to be deposited from the flue-gas as dust in a subsequent stage, normally a bag filter. ...

    By Santes Ltd. Co. based in Temelli, TURKEY. from Flue Gas Treatment Product line

  • Xerosorp - Dry Scrubber

    The Xerosorp process removes acidic gases by adsorption with sodium bicarbonate. Due to the very high reactivity of sodium bicarbonate, only little overdosing is required which minimizes reagent consumption and residue generation. In addition, activated carbon or coke can be injected for removal of volatile organics and metals. The process is ...

    By Hitachi Zosen Inova AG based in Zurich, SWITZERLAND. from Flue Gas Treatment Product line

  • Xerosorp+ - Scrubber

    The Xerosorp+ Process Combines the Advantages of the Dry Scrubbing Process and Low Temperature SCR-DeNOx System. The Xerosorp+ process is the optimized combination of the Xerosorp and the low temperature SCR-DeNOx processes. If highest removal efficiencies are required for ash, acid gas and NOx, the Xerosorp+ process is the solution with lowest ...

    By Hitachi Zosen Inova AG based in Zurich, SWITZERLAND. from Flue Gas Treatment Product line

  • Model HZI - Wet Scrubber

    Wet scrubbing is the most effective method for removing acid gases from even heavily burdened flue gases and achieving lowest emission levels. It also assures excellent removal of fine particulates and aerosols. Consumable usage rates and residue quantities are minimised. The contaminants are captured by providing intensive contact between the ...

    By Hitachi Zosen Inova AG based in Zurich, SWITZERLAND. from Flue Gas Treatment Product line

  • Dry Scrubber

    In dry scrubber the absorption agent (usually lime or sodium bicarbonate) is fed into the reactor as a dry powder. In the reactor, gaseous pollutants are absorbed by the agent. The dose rate of reagent may depend on the temperature as well as on reagent type. In the design of SANTES Flue Gas Treatments, generally sodium bicarbonate is used as the ...

    By Santes Ltd. Co. based in Temelli, TURKEY. from Flue Gas Treatment Product line

  • Reactor

    The reactor relies on active carbon as absorption medium for the reaction to adsorb heavy metals and dioxin &furans. Dioxins and furans, having been destroyed in the post combustion chamber, can form again in the subsequent heat exchanger because of the cooling procedure. Activated carbon is added to the lime to absorb dioxins and Hg.

    By Santes Ltd. Co. based in Temelli, TURKEY. from Flue Gas Treatment Product line

  • MERCOX - Mercury Removal System

    Mercury is often emitted from thermal treatment installations during brief periods creating extremely high mercury concentration spikes in untreated flue gases. Many traditional flue gas cleaning systems have limited buffer capacity, which means such concentrations cannot be reduced as much as desired. In such cases, or in applications in which ...

  • Model 1100 - Handheld Flue Gas Analyzer

    The IMR 1100 is the smallest flue gas measuring device from IMR, The handy size, low weight and the logical and simple operation make the IMR 1100 the ideal instrument for chimney sweeps, heating contractors and burner servicing.In addition to a case with a magnetic mount the IMR 1100 is supplied in carrying case with all necessary accessories. A ...

  • Flue Gas Desulphurisation System

    KC Cottrell is able to offer FGD technology for large process applications such as power stations, steel works, and chemical plants. This high efficiency, low cost, limestone to gypsum process is well proven and is operational on many large boiler units worldwide

    By KC Cottrell, Inc based in The Woodlands, TEXAS (USA).

  • Premium

    ERG - Air Pollution Control and Industrial Gas Treatment Systems

    ERG is a leader in the field of air pollution control through on our extensive knowledge and wealth of experience of the technology in this sector. Our tailor-made design solutions are optimised to give the best technical solution for the lowest capital and running cost, and our systems have been installed world-wide.

    By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM. from Air Pollution Control Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you