flue gas treatment Equipment available in Niger

Available in Niger| Near Niger
103 Results found

We couldn't find any flue gas treatment equipment in Niger

Here is a list of results available in Niger

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: flue gas treatment ×

  • Available in: Africa ×

  • Available in: Niger ×

Gas Cooling and Drying System for Flue Gas Treatment

by Hofstetter BV     based in Schiphol-Rijk, NETHERLANDS

The gas temperature and moisture content is conditioned to the required level by cooling and condensation of the moisture in the gas. Depending on the required conditions air fin gas coolers or chiller systems are used to cool and condense the gas. After cooling/condensation the moisture droplets are removed from the gas with moisture ...

Flue Gas Treatment systems

by Lodge Cottrell Ltd     based in Halesowen, UNITED KINGDOM

Typically flue gas treatment systems are required when particulates and other gaseous pollutants are required to be removed from exhausts. Such pollutants include acid gases (such as SO2, HCl, etc.), heavy metals (such as mercury) and dioxins. Typically such pollutants are created by the conversion of waste or biomass into energy. Under such cir

Flue Gas Treatment Systems

by Lodge Cottrell Ltd     based in Halesowen, UNITED KINGDOM

Typically flue gas treatment systems are required when particulates and other gaseous pollutants are required to be removed from exhausts.Such pollutants include acid gases (such as SO2, HCl, etc.), heavy metals (such as mercury) and dioxins. Typically such pollutants are created by the conversion of waste or biomass into energy.

Flue Gas Treatment Products

by Redecam Group S.r.l.     based in Sesto San Giovanni MI, ITALY

Redecam’s complete product portfolio, coupled with our experts’ technological know-how, allow us to tackle the most challenging flue gas treatment (FGT) issues, allowing you to reach your emissions reduction requirements in an efficient, cost-effective and rapid manner. Based on the required abatement percentage(s), we will design ...

Xerosorp For Dry Scrubbing Flue Gas Treatment Process

by Hitachi Zosen Inova     based in Zurich, SWITZERLAND

The dry scrubbing flue gas treatment process is designed to remove acidic gaseous contaminants by absorption with sodium bicarbonate. Due to the very high reactivity of sodium bicarbonate, only a small stoichiometry amount is required. The process is nearly independent of temperature and thus enables maximum energy recovery.

Inova Semi Dry Flue Gas Treatment Process

by Hitachi Zosen Inova     based in Zurich, SWITZERLAND

Semi Dry: Simple, Effective and Waste Water Free. The semi dry flue gas treatment process removed acidic gaseous contaminants by neutralisation with hydrated lime dust. Heavy metal compounds and organic contaminants, such as dioxins and furans, are separated by adsorption onto activated carbon in the same process step.

Sorbacal - Model HSH - Single-Pass Dry Flue Gas Treatment

by Lhoist Group     based in Limelette, BELGIUM

Sorbacal HSH is a calcium hydroxide specifically developed for the single-pass dry flue gas treatment. It differs from Sorbacal H with a higher specific surface area (SSA): 15-18 m²/g for Sorbacal H and 25 m²/g for Sorbacal HSH. Sorbacal HSH was developed for the specifications of the Brazilian market and is produced in Brazil today.

Tekran - Model 3300Xi - Mercury Continuous Emission Monitor

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The EPA Electric Generating Unit Mercury and Air Toxics (EGU MATS) and Portland Cement Maximum Achievable Control Technology (PC MACT) regulations require reductions in gaseous mercury emissions. Tekran has proven technology to support mercury compliance monitoring, abatement system optimization, and performance audit testing instrumentation.

THERMOX - Model WDG-IVM/IQ - Smart Flue Gas Analyzers

by Ametek Process Instruments - THERMOX     based in Pittsburgh, PENNSYLVANIA (USA)

The WDG-IVM analyzer measures oxygen, combustibles and methane in natural gas-fired applications. It is ideal for gas-fired power boilers or for those using natural gas during start-up and shutdown. With this analyzer, you can monitor oxygen and combustibles for maximum fuel efficiency. In addition, the methane detector can be used for purge and ...

Reactor

by Santes Ltd. Co.     based in Temelli, TURKEY

The reactor relies on active carbon as absorption medium for the reaction to adsorb heavy metals and dioxin &furans. Dioxins and furans, having been destroyed in the post combustion chamber, can form again in the subsequent heat exchanger because of the cooling procedure. Activated carbon is added to the lime to absorb dioxins and Hg.

Dry Scrubber

by Santes Ltd. Co.     based in Temelli, TURKEY

In dry scrubber the absorption agent (usually lime or sodium bicarbonate) is fed into the reactor as a dry powder. In the reactor, gaseous pollutants are absorbed by the agent. The dose rate of reagent may depend on the temperature as well as on reagent type. In the design of SANTES Flue Gas Treatments, generally sodium bicarbonate is used as the ...

Wet Scrubber

by Santes Ltd. Co.     based in Temelli, TURKEY

Wet scrubbers are used to absorb soluble gases into water or other liquids such as solutions and to remove particulates from gas streams by contacting with water or other liquid. The flue-gas flow is fed into water, hydrogen peroxide, or/and a washing solution containing part of the reagent (e.g. sodium hydroxide solution). In order to eliminate ...

Bag Filter

by Santes Ltd. Co.     based in Temelli, TURKEY

In dry sorption processes the absorption agent (activated carbon) is fed into the reactor as a dry powder. The dose rate of activated carbon may depend on the temperature as well as on reagent type and brand. The reaction products generated are solid and need to be deposited from the flue-gas as dust in a subsequent stage, normally a bag filter. ...

MERCOX - Mercury Removal System

by Götaverken Miljö AB, part of Babcock & Wilcox Vølund A/S     based in GÖTEBORG, SWEDEN

Mercury is often emitted from thermal treatment installations during brief periods creating extremely high mercury concentration spikes in untreated flue gases. Many traditional flue gas cleaning systems have limited buffer capacity, which means such concentrations cannot be reduced as much as desired. In such cases, or in applications in which ...

Model 1100 - Handheld Flue Gas Analyzer

by IMR Ingenieurgesellschaft für Mess- und Regeltechnik mbH     based in Neckarsulm, GERMANY

The IMR 1100 is the smallest flue gas measuring device from IMR, The handy size, low weight and the logical and simple operation make the IMR 1100 the ideal instrument for chimney sweeps, heating contractors and burner servicing.In addition to a case with a magnetic mount the IMR 1100 is supplied in carrying case with all necessary accessories. A ...

Flue Gas Desulphurisation System

by KC Cottrell, Inc     based in The Woodlands, TEXAS (USA)

KC Cottrell is able to offer FGD technology for large process applications such as power stations, steel works, and chemical plants. This high efficiency, low cost, limestone to gypsum process is well proven and is operational on many large boiler units worldwide

Minsorb - Mineral Alternative For The Removal of Micro-Pollutants

by Lhoist Group     based in Limelette, BELGIUM

Minsorb is the 100% mineral alternative for the removal of micro-pollutants in dry flue gas treatment. dioxins/furans (PCDD/PCDF), PCB and PAH. Mercury: metallic and ionic.

ERG - Air Pollution Control and Industrial Gas Treatment Systems

by ERG (Air Pollution Control) Ltd     based in Horsham, UNITED KINGDOM

ERG is a leader in the field of air pollution control through on our extensive knowledge and wealth of experience of the technology in this sector. Our tailor-made design solutions are optimised to give the best technical solution for the lowest capital and running cost, and our systems have been installed world-wide.

Steuler - Flue Gas Desulphurisation Technology

by Steuler Anlagenbau GmbH & Co. KG     based in Hoehr-Grenzhausen, GERMANY

Steuler Plant Construction is constantly working on further developments to its tried-and-tested flue gas desulphurisation process. Until now, it has usually been reserved for use in large-scale plants, but Steuler's work has now enabled its technical application to smaller and medium-sized production stages. This resolute approach has turned ...

ERG - Air Pollution Control and Industrial Gas Treatment Systems

by ERG (Air Pollution Control) Ltd     based in Horsham, UNITED KINGDOM

ERG is a leader in the field of air pollution control through on our extensive knowledge and wealth of experience of the technology in this sector. Our tailor-made process designs are optimised to give the best air pollution solutions for the lowest capital and running cost, and our systems have been installed world-wide.

Need help finding the right suppliers?

Let the XPRTs do the work for you