Showing results for: Flue Gas Treatment Equipment Available In New Jersey
-
Manufactured by China Xicheng EP Ltdbased in CHINA
Activated carbon adsorption box is an economical and practical flue gas treatment system for organic waste gas with compliance rate; it is an environmental protection equipment product for waste gas filtration and adsorption of peculiar smell. The activated carbon adsorption box has the advantages of high ...
-
Manufactured by D.R. Technology, Inc.based in USA
D.R. Technology offers Pollution Control systems capable of treating gases up to 2000 degrees F°. Quenchers/Scrubbers/Absorbers can reduce acid levels by as much as 99+% and recover saleable acid ...
-
Manufactured by Lhoist Groupbased in BELGIUM
Sorbacal HSH is a calcium hydroxide specifically developed for the single-pass dry flue gas treatment. It differs from Sorbacal H with a higher specific surface area (SSA): 15-18 m²/g for Sorbacal H and 25 m²/g for Sorbacal HSH. Sorbacal HSH was developed for the specifications of the Brazilian market and is produced in Brazil ...
-
Manufactured by General Carbon Corporationbased in USA
GC Powdered FG activated carbon is a virgin carbon. Derived from selected grades of bituminous coal, its surface area and pore volume make it ideal for use on flue gas applications, including the removal of mercury, dioxins, furans and other VOC ...
-
Manufactured by Hofstetter BVbased in NETHERLANDS
The gas temperature and moisture content is conditioned to the required level by cooling and condensation of the moisture in the gas. Depending on the required conditions air fin gas coolers or chiller systems are used to cool and condense the gas. After cooling/condensation the moisture droplets are removed from the ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
Our FGD treatment system integrates physical and chemical processes to provide reliable performance in a wide range of operating conditions without modification. The high-rate DensaDeg® Clarifier/Thickener can be used to upgrade an existing electric power generating plant for effortless permitting. Mixing, solids recirculation, sludge ...
-
Manufactured by Oy Galvatek Abbased in FINLAND
Specialised neutralising plants for the removal of heavy metals and suspended solids from FGDP wastewater in power plants. Wastewater Treatment Plants for Flue Gas Desulphurization (FGD) and other Power Plant Applications. Galvatek’s wastewater treatment plant solutions for power plant applications are typically part of the ...
-
Manufactured by Santes Incineratorbased in TURKEY
In dry scrubber the absorption agent (usually lime or sodium bicarbonate) is fed into the reactor as a dry powder. In the reactor, gaseous pollutants are absorbed by the agent. The dose rate of reagent may depend on the temperature as well as on reagent type. In the design of SANTES Flue Gas Treatments, generally sodium bicarbonate is ...
-
Manufactured by Santes Incineratorbased in TURKEY
The reactor relies on active carbon as absorption medium for the reaction to adsorb heavy metals and dioxin &furans. Dioxins and furans, having been destroyed in the post combustion chamber, can form again in the subsequent heat exchanger because of the cooling procedure. Activated carbon is added to the lime to absorb dioxins and ...
-
Manufactured by Santes Incineratorbased in TURKEY
Wet scrubbers are used to absorb soluble gases into water or other liquids such as solutions and to remove particulates from gas streams by contacting with water or other liquid. The flue-gas flow is fed into water, hydrogen peroxide, or/and a washing solution containing part of the reagent (e.g. sodium hydroxide solution). In order to ...
-
Manufactured by Hitachi Zosen Inova AGbased in SWITZERLAND
The HZI SemiDry process employs the principle of the circulating fluidized bed for efficient removal of acid gases by adsorption with hydrated lime. Recirculation of reagent maximizes reagent use and provides excess reagent to capture contaminat peaks. In addition, activated carbon or coke can be injected for removal of volatile organics and ...
-
Manufactured by Hitachi Zosen Inova AGbased in SWITZERLAND
Wet scrubbing is the most effective method for removing acid gases from even heavily burdened flue gases and achieving lowest emission levels. It also assures excellent removal of fine particulates and aerosols. Consumable usage rates and residue quantities are minimised. The contaminants are captured by providing intensive contact ...
-
Manufactured by Dusconbased in ITALY
there is the problem of Mercury, Heavy Metals & Dioxins in ...
-
Manufactured by Santes Incineratorbased in TURKEY
. Therefore, bag filters are placed to Santes Flue Gas Treatment Systems in order to remove reacted heavy metals and unreacted activated carbon from the Flue Gas. Within Jet Pulse cleaning mechanism of the Bag Filter, diaphragm valves are used for each filter bag. There are also timers and pressure difference ...
-
Manufactured by Hitachi Zosen Inova AGbased in SWITZERLAND
The Xerosorp process removes acidic gases by adsorption with sodium bicarbonate. Due to the very high reactivity of sodium bicarbonate, only little overdosing is required which minimizes reagent consumption and residue generation. In addition, activated carbon or coke can be injected for removal of volatile organics and metals. The process is nearly independent of temperature and thus allows ...
-
Manufactured by Dusconbased in ITALY
Our DeSOx & Acid Control systems are, mainly, based on dry reagent (absorbent) injection philosophy. These types of systems are one of the most attractive options for SOx control and have become more popular technologies in the Europe and US, than in other areas of the world. The above systems are, usually, designed to remove SO2, SO3, HCl and HF with the injection of hydrated lime or sodium ...
-
Manufactured by Hitachi Zosen Inova AGbased in SWITZERLAND
In addition to the advantages of the Inova Wet Scrubber, the Condensing Scrubber allows additional heat recovery by means of condensation of the water vapour contained in the flue gas. This allows overall EfW plant energy efficiencies of up to 100% or more (on a Lower Heat Value basis). Energy recovered from the condensing ...
-
Manufactured by Hitachi Zosen Inova AGbased in SWITZERLAND
reagent consumtion, lowest residue generation, highest energy efficiency and most compact design. Both the dry scrubbing and the SCR DeNOx processes operate at the same temperature avoiding energy and head losses for flue gas conditioning. Maximum heat can be recovered prior to and after the Xerosorp+ ...
-
Manufactured by Carmeuse Americasbased in USA
For many utilities and industrial applications, dry sorbent injection (DSI) of hydrated lime offers impressive advantages over the wet or semi-wet flue gas desulfurization systems for controlling the emissions of SO2, HCl, HF, SO3 and even Hg. These potential advantages include ease of retrofit, dry waste and low capital investment. ...
-
Manufactured by Carmeuse Americasbased in USA
In the MEL process, lime reagent, containing calcium hydroxide (Ca(OH)2) and magnesium hydroxide (Mg(OH)2), is used to react with the SO2. As with the LSFO process, the hydroxide slurry is added to the recycle tank to replenish reagent consumed under pH control of 6 to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you