flue gas treatment Equipment in Belgium

12 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: flue gas treatment ×

  • In: Europe ×

  • In: Belgium ×

Sorbacal - Model HSH - Single-Pass Dry Flue Gas Treatment

by Lhoist Group     based in Limelette, BELGIUM

Sorbacal HSH is a calcium hydroxide specifically developed for the single-pass dry flue gas treatment. It differs from Sorbacal H with a higher specific surface area (SSA): 15-18 m²/g for Sorbacal H and 25 m²/g for Sorbacal HSH. Sorbacal HSH was developed for the specifications of the Brazilian market and is produced in Brazil today.

Minsorb - Mineral Alternative For The Removal of Micro-Pollutants

by Lhoist Group     based in Limelette, BELGIUM

Minsorb is the 100% mineral alternative for the removal of micro-pollutants in dry flue gas treatment. dioxins/furans (PCDD/PCDF), PCB and PAH. Mercury: metallic and ionic.

Tekran - Model 3300Xi - Mercury Continuous Emission Monitor

by Tekran Instruments Corporation     Distributor in BELGIUM

The EPA Electric Generating Unit Mercury and Air Toxics (EGU MATS) and Portland Cement Maximum Achievable Control Technology (PC MACT) regulations require reductions in gaseous mercury emissions. Tekran has proven technology to support mercury compliance monitoring, abatement system optimization, and performance audit testing instrumentation.

OXY-THERM - Model 300 Series - Natural Gas Burners

by Maxon Corporation - a Honeywell Company     Office in Vilvoorde, BELGIUM

OXY-THERM 300 Series Natural Gas Burners offer capacities up to 300,000 Btu/hr (88 kW) with choice of two block shapes and provide clean combustion with low NOx levels. OXY-THERM 300 Series Industrial Burners use oxygen for the combustion reaction, removing atmospheric nitrogen as a source for NOx creation. OXY-THERM burns any gaseous fuel, ...

SCR DeNOx Systems

by HAMON     based in Mont St Guibert, BELGIUM

Selective Catalytic Reduction (SCR) is the most effective method of controlling nitrogen oxide emissions (NOx) from combustion sources. It is a commercially proven flue gas treatment technology that has been demonstrated to remove over 90 percent of the NOx contained in combustion system exhaust gas. Nitrogen oxides contribute to acid rain and ...

EUROPEM - Tulip Vortex Burner

by Europem N.V     based in Lier, BELGIUM

The Tulip Vortex burner was developed specifically for (temperature controlled) combustors for the treatment of lean waste gases and vapours. It employs the same design philosophy as the Ultra-low NOx Tulip Vortex burners but is designed for the combustion of lean waste gases, whilst minimizing support fuel requirements. The burner creates an ...

Air Purification Powdered Activated Carbon

by Cabot Corporation     Office in Loncin, BELGIUM

Activated carbon plays an integral role in purifying the world's air quality, indoors and out.Whether you are working to meet emission regulations to protect the environment and human health, controlling emissions, or reducing harmful or nuisance odors. Cabot Norit Activated Carbon offers a variety of activated carbon products to help address your ...

Utility Flares

by Europem N.V     based in Lier, BELGIUM

Utility Flares (Pipe Flares) are the most basic flare design available, to provide a robust, reliable and flexible solution for the flaring of large volumes of low pressure waste gas when smokeless operation is either not required or can be achieved without an assisting medium (like steam, air or gas). Reliable operation at both full load and ...

Azelis Activated Carbon

by Azelis     based in Antwerp, BELGIUM

Azelis Chemical Industries offers a complete range of Activated Carbon products sourced from premium grade raw materials of coal, coconut shell and wood to meet customer requirements. We provide proactive services to international customers and our dedicated specialists can help you find innovative, cost effective, environmentally beneficial ...

OXY-THERM - Model 300 Series - Oil-Fired Oxy Fuel Burners

by Maxon Corporation - a Honeywell Company     Office in Vilvoorde, BELGIUM

OXY-THERM 300 Series Oil Fired Fuel Burners offer capacities up to 300,000 Btu/hr (88 kW) and provide clean combustion with low NOx levels. This fuel burner is available with choice of two block shapes OXY-THERM 300 Series Industrial Burners use oxygen for the combustion reaction, removing atmospheric nitrogen as a source for NOx creation. ...

Dekati - Model FPS - Fine Particle Sampler

by Dekati Ltd.     Distributor in BELGIUM

Dekati® Fine Particle Sampler is a guaranteed solution for diluting and conditioning aerosol and gaseous samples for measurement instruments. This versatile dilution system allows dilution factor adjustment between 1:20 and 1:200 and first stage dilution temperature settings between 0 and 350 °C. Temperatures and pressures in different parts of ...

DioxinMonitoringSystem - Permanent Installed Sampler

by Monitoring Systems GmbH     Distributor in Opoeteren-Maaseik, BELGIUM

Long term emission sampling of dioxins and other organics. The DioxinMonitoringSystem is the most advanced and most reliable industrial isokinetic long term sampling device. The DioxinMonitoringSystem is a device, which has been developed for continuous monitoring of dioxin emissions.

Need help finding the right suppliers?

Let the XPRTs do the work for you