flue gas treatment Equipment in New Jersey

12 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: flue gas treatment ×

  • In: USA ×

  • In: New Jersey ×

GC - Powdered FG Activated Carbon For Flue Gas Treatment

by General Carbon Corp.     based in Paterson, NEW JERSEY (USA)

GC Powdered FG activated carbon is a virgin carbon. Derived from selected grades of bituminous coal, its surface area and pore volume make it ideal for use on flue gas applications, including the removal of mercury, dioxins, furans and other VOC compounds.

D.R. Technology - Thermal Oxidizer Flue Gas Treatment

by D.R. Technology, Inc.     based in Freehold, NEW JERSEY (USA)

D.R. Technology offers Pollution Control systems capable of treating gases up to 2000 degrees F°. Quenchers/Scrubbers/Absorbers can reduce acid levels by as much as 99+% and recover saleable acid solutions.

Flue Gas Desulphurisation System

by KC Cottrell, Inc     Office in Flemington, NEW JERSEY (USA)

KC Cottrell is able to offer FGD technology for large process applications such as power stations, steel works, and chemical plants. This high efficiency, low cost, limestone to gypsum process is well proven and is operational on many large boiler units worldwide

Flue Gas Desulfurization (FGD) Wastewater Treatment System

by Degremont Technologies - a subsidiary of Suez Environnement     based in Duebendorf, SWITZERLAND

Our FGD treatment system integrates physical and chemical processes to provide reliable performance in a wide range of operating conditions without modification. The high-rate DensaDeg® Clarifier/Thickener can be used to upgrade an existing electric power generating plant for effortless permitting. Mixing, solids recirculation, sludge thickening ...

Hamon - Wet Gas Scrubbers

by Hamon USA     based in Somerville, NEW JERSEY (USA)

While many systems can be used to obtain particulate and sulfur oxide reductions, not all systems are created equal. The following sections outline a number of key factors, which make the ExxonMobil Wet Gas Scrubber as supplied by Hamon Research Cottrell the best choice for FCCU emissions control:

Chemical Recovery / Production Systems

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

Capture and Reuse Gas Stream Pollutants with Modular Recovery Systems. There are dozens of applications and products that meet the gas composition and other criteria needed to enable an economical recovery solution.  Recovery of scrubbed products and by-products can be the best most cost effective viable option to meet emission standards. It ...

Novatech - Model 1732 Series - Oxygen Transmitter Analyzer

by Monitoring Solutions     Office in Hampton, NEW JERSEY (USA)

The 1732 O2 Analyzer is a smart investment that soon pays for itself through fuel savings and reduced pollution: Without accurate oxygen monitoring, there is a likelihood of excess energy being used to heat air simply disappearing through the stack. If too little air is used in the combustion process, dangerous fuel-rich flue gases are generated. ...

OXY-THERM - Model 300 Series - Natural Gas Burners

by Maxon Corporation - a Honeywell Company     Distributor in NEW JERSEY (USA)

OXY-THERM 300 Series Natural Gas Burners offer capacities up to 300,000 Btu/hr (88 kW) with choice of two block shapes and provide clean combustion with low NOx levels. OXY-THERM 300 Series Industrial Burners use oxygen for the combustion reaction, removing atmospheric nitrogen as a source for NOx creation. OXY-THERM burns any gaseous fuel, ...

CatCO - Oxidation Catalysts

by BASF Catalysts     based in Iselin, NEW JERSEY (USA)

BASF's CatCO oxidation catalyst is specifically formulated to provide superior abatement of carbon monoxide (CO) from diesel and natural gas engine applications, wood fired boilers and many other process applications, enabling compliance with today's strict environmental standards.

Selective Catalytic Reduction

by Branch Environmental Corp.     based in Somerville, NEW JERSEY (USA)

SCR systems use our catalytic design to react ammonia injected into the air stream with the NOx present. This approach  requires an operating temperature of 320-700º F (160-320º C) depending on the catalyst used.

Komline-Sanderson - Rotary Atomizer

by Komline-Sanderson     based in Peapack, NEW JERSEY (USA)

Komline-Sanderson's variable-speed rotary atomizers represent a dependable approach to atomization and spray drying. The compact, rugged, direct-drive, high-speed motor, utilizing only a few parts in one rotating assembly (no gear, pulley, gearbox or coupling), reduces the need for traditional mechanical maintenance. High quality, oil-mist ...

OXY-THERM - Model 300 Series - Oil-Fired Oxy Fuel Burners

by Maxon Corporation - a Honeywell Company     Distributor in NEW JERSEY (USA)

OXY-THERM 300 Series Oil Fired Fuel Burners offer capacities up to 300,000 Btu/hr (88 kW) and provide clean combustion with low NOx levels. This fuel burner is available with choice of two block shapes OXY-THERM 300 Series Industrial Burners use oxygen for the combustion reaction, removing atmospheric nitrogen as a source for NOx creation. ...

Need help finding the right suppliers?

Let the XPRTs do the work for you