Gas Alarm Equipment Near Vermont
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR IX616 portable four gas detector can make continuous detection to combustible and toxic gases. It is suitable for combustible and toxic gas leakage detection in underground pipe or mines. It keeps the workers safe and helps prevent the facilities from being ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR IX176 portable single gas detector can make continuous detection to combustible and toxic gases. It is suitable for combustible and toxic gas leakage detection in underground pipe or mines. It keeps the workers safe and helps prevent the facilities from being destroyed. It has a high-quality sensor, and uses natural diffusion as the ...
-
Manufactured by PureAire Monitoring Systems, Incbased in USA
-Universal transmitter connects to toxic and corrosive gas sensors -2 alarm relays with signal to horn/strobe, building systems, etc. -Built-in audible horn and visual alarms with bright LED’s -4-20mA analog output -24/7 Supervised electronics continuously checks sensor and system status -Low-cost long life renewable sensor, $35 per ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME CEW4 series is a microprocessor-based up to 4 channels multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a 900 MHz or 2.4 GHz wireless ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME CEL-4 QuadSet series is a microprocessor-based up to 4 channels multigas detection and control system that can be used with GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a true RS485 daisy chain communication ...
-
PremiumManufactured by ENVEAbased in FRANCE
Perfectly adapted to monitor the efficiency of different Mercury Removal Units (MRUs) in natural gas processing plants. Each mercury on-line system will differ in sample characteristics as well as installation conditions and operating environment. We have the experience to design systems that fully meet the requirements of your particular ...
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
Industry-proven open path gas detection for line of sight ...
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
Universal Point Gas Detection System Accepting Combustible (Infrared or Catalytic), Toxic, and Oxygen Gas ...
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
Universal Point Gas Detector Accepting Combustible (Infrared or Catalytic), Toxic, and Oxygen Gas ...
-
Manufactured by Ekto Manufacturing Corporationbased in USA
EKTO Shelters and Enclosures are custom designed to suit your needs, and are available in sizes ranging from 2’x2’x2′ up to 10’H x 12’W x 40’L. We can also build shelters designed to be joined together – allowing for double wide and larger custom sized units. The units can be supplied with as many or as few options as necessary. We offer “Bare ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
QRAE 3 is a versatile, rugged, one- to four-sensor pumped or diffusion gas monitor that provides continuous exposure monitoring of oxygen (O2), combustibles, and toxic gases, including hydrogen sulfide (H2S), carbon monoxide (CO), sulfur dioxide (SO2) and hydrogen cyanide (HCN) for workers and responders in hazardous ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
This full-featured single-gas monitor is compact and light enough to clip onto a uniform or belt, which provides personal protection in a range of environments. The ToxiRAE II continuously displays gas concentration, short-term exposure limit (STEL), time-weighted average (TWA), and peak values for one of more than 10 toxic gases, or users ...
-
Manufactured by RKI Instruments, Inc.based in USA
Gas detection should not be complicated. The Beacon 110 is gas detection simplified. The Beacon 110 is a powerful, low cost fixed system controller for one point of gas detection. It is microprocessor controlled, versatile, simple to install and operate, and priced to be the industry's best value single gas detection controller. ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
The FA200 Alarm Bar is part of the MeshGuard system for hazardous gas detection. The alarm device comes with one audible and four visual alarm outputs, and the alarm logic is fully configurable from the FMC 2000 multi-channel ...
-
Manufactured by Detector Oybased in FINLAND
is exposed to gas, an automatic alarm is sent to co-workers or the control room by the phone. A cradle charger, battery-operated pump unit and calibration station are available ...
-
Manufactured by RKI Instruments, Inc.based in USA
RKI is proud to introduce our Digester Gas Monitor. Gas from waste digesters contains high levels of methane, CO2, and H2S, with little to no oxygen present. The RKI gas monitor checks for all these gases on a cyclic basis. A powerful air aspirator pulls a sample from up to 100 feet away. Since digester gas contains high humidity ...
-
Manufactured by RKI Instruments, Inc.based in USA
A perfect low cost solution for hydrogen detection in battery rooms, or for LEL or PPM level detection of a variety of flammable or solvent vapors in general ...
-
Manufactured by Armstrong Monitoring Corporation (AMC)based in CANADA
The AMC-1AVCs Gas Monitor is an economical monitoring solution for mixed vehicle applications. With combined carbon monoxide and nitrogen dioxide monitoring and a rugged steel enclosure, the AMC-1AVCs turns even the simplest job into big savings. The AMC-1AVCs is ideal for smaller applications where you'll encounter both gasoline and ...
-
Manufactured by Armstrong Monitoring Corporation (AMC)based in CANADA
A highly configurable monitor that combines reliability and economy, the AMC-1A series incorporates micro-controller based design to provide versatile gas detection capabilities within a compact package. The AMC-1A Series gas monitor delivers up to two channels of gas detection, and is available with options including a weatherproof Nema ...
-
Manufactured by Armstrong Monitoring Corporation (AMC)based in CANADA
The AMC 1AVCsvp Gas Monitor is an economical standalone monitoring package for mixed vehicle applications, incorporating state of the art sensing technology and micro-controller based design to provide accurate gas detection capabilities within a compact ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you