Gas Analysis Equipment In Virginia
-
Manufactured by QA Supplies LLCbased in USA
The Hydrion Ammonia Test Paper is designed and calibrated to measure the amount of ammonia in the air. These strips can be used to detect trace amounts of ammonia in poultry houses or animal rooms, where levels as low as 25 ppm can be detrimental. Also helps to identify contamination from processing ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Compact portable multigas analyser, capable of measuring up to eight flue gases in a range of combustion and emissions processes. Lancom 4 delivers the complete solution for portable flue gas analysis, integrated into a compact battery-powered unit able to measure up to eight gases simultaneously with nine separate sensors. Simple to ...
-
Manufactured by Jacobs Process Analytics Inc.based in USA
For a reliable, accurate analysis of a gaseous sample many analyzers require a known, stable pressure. Otherwise, the results can be affected by variations in pressure. When the sample is drawn from a source that is close to atmospheric pressure, a means must be provided to transport the sample to the analyzer while maintaining close ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A compact, reliable multi-gas analyser for measuring flue gas emissions in processes burning natural gas and biomass. The FGA provides accurate, reliable measurement of carbon monoxide, nitric oxide and oxygen in flue gases. It is an integrated solution for Continuous Emissions Monitoring Systems (CEMS) applications in smaller combustion ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A highly flexible range of high-precision flue gas oxygen analysers developed specifically for combustion analysis and control applications. Using AMETEK’s industry-proven zirconium oxide sensor technology, the WDG-1200/1210 range provides the world’s first fully-integrated, standalone flue gas oxygen analysers. The user ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Using quartz crystal technology for speed, accuracy and calibration stability, the 5910 moisture analyzer is designed for ultra-high-purity (UHP) gas analysis in continuous monitoring and analytical cart applications. Delivering exceptional baseline stability and sensitivity to sub-parts-per-billion-by volume (ppbv) changes in ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 5920 is an easy-to-use process moisture analyzer offering a wide range of performance features for low parts-per-billion level gas analysis in critical moisture measurement applications. It provides an extensive range of performance features including multi-gas compatibility, exceptional accuracy, online verification system, fast ...
-
based in USA
The SmartCEMS® Shelter CEMS is a complete continuous emission monitoring system (CEMS) contained in a fixed shelter. The Shelter CEMS is without a zone rating such as ATEX II. The Shelter CEMS can be equipped to provide continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The 5812 moisture analyzer is designed specifically to meet the needs of the natural gas industry for reliable, low-maintenance, self-verifying moisture analysis, with a rapid response to moisture changes. A combination of quartz crystal sensing and asymmetrical sampling provides the rugged, reliable and continuous performance demanded by ...
-
based in USA
The SmartCEMS® Mobile CEMS is a complete mobile monitoring system on wheels and an integral part of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Mobile CEMS will meet the requirements for ...
-
based in USA
The SmartCEMS® Remote Terminal Unit is a component of a predictive emission monitoring system (PEMS) that provides continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The PEMS Analyzer will meet the requirements of Subpart E of Part 75 and/or and the standard ...
-
Manufactured by AMETEKbased in USA
Combustion gas measurements for NOx efficiency and product quality are especially challenging in the glass container manufacturing process. Two types of gas-fired furnaces exist that require post and pre combustion gas analysis. The glass furnace or 'melt-tank' is fired by conventional burners that mix pre-heated air and fuel in ...
-
based in USA
The SmartCEMS Shelter CEMS is a complete continuous emission monitoring system (CEMS) contained in a fixed shelter. The Shelter CEMS is typically supplied either with or without a zone rating such as ATEX II. The Shelter CEMS can be equipped to provide continuous stack gas analysis for pollutants and diluents under U.S. EPA 40 CFR Part ...
-
based in USA
is required to connect the sample line and the Mobile CEMS to the stack sampling port for extraction of exhaust gas for ...
-
based in USA
. The Sample Line is required to connect the Probe to the Sample Interface Panel and the Mobile CEMS for transport of exhaust gas for ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The feature-rich 5100 TDLAS offers high-sensitivity, analyte-specific, fast-response measurements for critical industrial applications. It features a single absorption cell and integrated sample system in a compact, cost-effective package. The 5100 uses a reference cell to line-lock the laser on a desired wavelength. Any minor shift in the observed spectrum is used as feedback to adjust the ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The MGB1000 is a micro gas blender ideal for calibrating gas analyzers, such as AMETEK Process Instruments’ ta3000 and ta5000 series, with parts-per-million (ppm) or parts-per-billion mixes of a single or mixed-component gas standard. It generates consistent and reliable fixed-point gas concentrations at blend ratios up to ...
-
Manufactured by AMETEKbased in USA
process upsets in the presence of very low ppm oxygen readings. This unique benefit is particularly important in cryogenic gas generating processes, where the TM2000 can distinguish between an oxygen upset condition and an excess combustibles upset ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
A trace oxygen analyzer offering superior protection for a range of industrial applications through a rapid response to process changes. With a modular design for easy upgrades and field service, the TM2000 can accurately respond from atmosphere to low parts per million (ppm) in just seconds, serving a wide measurement range from 0.1 ppm to 100% ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The IPS-4 is a cost-effective, low maintenance photometric spectrometer with the ability to measure up to eight analytes in a gas or liquid phase sample. Available in UV-VIS, NDIR and IR/UV platforms, it provides a fully integrated sample conditioning system for easy maintenance. The IPS-4 has an IP65enclosure and is durable enough for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you