Gas Calibration Equipment In Africa
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Gasmet portable calibrator is one of the most important tools in generating new applications for the Gasmet FTIR gas analyzer. The calibrator incorporates a syringe pump, a manual needle valve, a mass flow meter, and a stainless-steel injection chamber. The syringe pump injects precise amounts of liquid or gas into a hot nitrogen ...
-
PremiumManufactured by ENVEAbased in FRANCE
The MGC101 system automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, 03, hydrocarbons and other gases. The MGC101 system automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, 03, hydrocarbons and other gases of interest. It meets all U.S. ...
-
PremiumManufactured by ENVEAbased in FRANCE
The MC-3000 generates a continuous stream of a mercury vapor loaded gas in order to check or calibrate mercury analyzers. An exactly adjustable carrier gas stream (normally air or nitrogen) is loaded with mercury in a first step. In a second step the gas is supersaturated by cooling. Subsequently the excess mercury is condensed ...
-
Manufactured by Teledyne APIbased in USA
The Model T750 is a portable, microprocessor based calibrator for precision gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero calibrations. The T750 is housed in a high-density, molded travel case which ...
-
Manufactured by Teledyne APIbased in USA
The Model T750U is a portable, microprocessor based calibrator for precision trace-level gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero calibrations. The T750U is housed in a high-density, molded travel ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
to calibrate gas analyzers manually, remotely controlled or automatically. It is installed in air pollution monitoring stations for quality assurance in the laboratory and also in the production of gas ...
-
Manufactured by Cambridge Sensotec Limitedbased in UNITED KINGDOM
Calibration Gas for the calibration and bump testing of single and multigas ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
The Serinus Cal 1000 performs gas dilution calibrations and is used in conjunction with regulatory traceable gases and a zero air generator. The most cost effective solution, the Serinus Cal 1000 allows the most up-to-date calibrations technology to be available to all. ...
-
PremiumManufactured by ENVEAbased in FRANCE
Pure air generator, capable of continuous delivery of up to 20 standard liters per minute (SLPM) of dry, contaminant-free air. The ZAG 7001 is a powerful stand-alone system: it does not require the supply of compressed ...
-
Manufactured by Industrial Scientificbased in USA
Calibration gas is an important component in ensuring the proper performance of your gas monitors. Calibration gas ensures that your gas detector is functioning properly and responding to gas exposures as expected. Gas detection equipment should be bump tested ...
-
PremiumManufactured by ENVEAbased in FRANCE
The Natural Gas Sampling System 3000 is designed for very fast conditioning of samples from a pressurized natural gas source. Can be connected directly to a pipeline or a sampling cylinder containing compressed natural gas. The outlet of the sampling system can be connected directly to athe UT-3000 monitor for direct Hg analysis or ...
-
Manufactured by Industrial Scientificbased in USA
To maintain your gas detection fleet, you will need the following accessories to properly perform bump and calibration tests. These simple accessories are important for conducting proper bump and calibration ...
-
PremiumManufactured by ENVEAbased in FRANCE
. For automatic calibration a motor driven syringe extracts a defined volume of mercury saturated gas and feeds it to the UT-3000 ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
With all the features of its Serinus Cal 1000 stablemate, the Serinus Cal 2000 adds features essential for calibration of your NOx and O3 analysis equipment. An internal ozone generator enables regular ozone checks and gas phase titrations (GPT). ...
-
Manufactured by Sierra Instruments, Inc.based in USA
Sierra's CalTrak 500 is an accurate primary standard gas flow calibrator for all inert ...
-
Manufactured by Sierra Instruments, Inc.based in USA
The CalTrak XL is the leading high-flow primary standard calibrator on the market today. The XL is used for calibration and verification of mass flow meters, controllers, variable area flow meters and precision in-situ calibration of industrial flow meters and ...
-
Manufactured by Sierra Instruments, Inc.based in USA
Bring the world’s most accurate flow standard to your lab with the CalTrak 800. The 800 is used for calibration and verification of: Mass flow meters, Controllers, Variable area flow ...
-
Manufactured by QED Environmental Systems, Incbased in USA
LANDTEC’s certified primary standard grade calibration gas assures highest quality for your instrument calibration needs. Landtec calibration gases are supplied with color-coded bands at the top of the label for easier visual identification. “Please note that shipments of calibration gases are subject ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
The Serinus Cal 3000 includes all the features from its Serinus Cal 1000 and Serinus Cal 2000 stablemates, adding an ozone photometer for the accurate creation and delivery of ozone concentrations when calibrating ozone analysers. The photometer accurately and continuously measures the ozone concentration to control output of the internal ...
-
PremiumManufactured by ENVEAbased in FRANCE
This accessory meant for manually calibrating the UT-3000 Mercury Ultratracer. The calibration unit is connected to the UT-3000 Ultratracer. With a special syringe a defined volume of mercury containing gas is drawn from the calibrator and injected into the calibration port of the UT-3000. After entering the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you