gas collector Equipment in Austria

13 Results found

Current filtering criteria

You can remove a filter by clicking on the x

MCZ - Model MicroPNS-2K - Gas Collector

by Umwelttechnik MCZ GmbH     Distributor in AUSTRIA

Control system for the automated collection of gases and particles on adsorption tubes, wash-bottles, or filters. Application areas include emission/immission measurements, TLV value monitoring, landfill gas sampling.

MCZ - Model MicroPNS - Gas Collector Control Module

by Umwelttechnik MCZ GmbH     Distributor in AUSTRIA

Collection on filter plates for the subsequent laboratory analysis (heavy metals) in samples. Control module MicroPNS as 19' rack model with switch for 8 filters. Collection system is mounted in a measuring station.

MCZ - Model MicroPNS - Automated Gas Collector System

by Umwelttechnik MCZ GmbH     Distributor in AUSTRIA

Control system for the automated collection of gases and particles on adsorption tubes, wash-bottles, or filters. Application areas include emission/immission measurements, TLV value monitoring, landfill gas sampling. The control program has a modular structure and, with an optional sampling switching, can log up to 8 sequential samples ...


MCZ - Model LVS1 - Low Volume Sampler

by Umwelttechnik MCZ GmbH     Distributor in AUSTRIA

Microcomputer controlled gas collector for the automated dust sampling on membrane filters with a diameter of 140 mm or 150 mm in acc. with EN 12341. Low volume sampler for dust, 1 channel, controlled with MicroPNS module, collects on 47/50 mm membrane filters.

Model CA - Condensate Collector

by Bilgeri EnvironTec GmbH     based in Fussach, AUSTRIA

Sewage treatment plant gas and biogas is steam-saturated gas. Typically it comes in biogas plants and their piping systems due to temperature influence on the formation of condensate water. Condensate may like to blockages at low points, deposits, corrosion lead in the pipeline components.

MCZ - Model HVS1 - High Volume Sampler

by Umwelttechnik MCZ GmbH     Distributor in AUSTRIA

High volume sampler for dust, multi-channel system, controlled with MicroPNS module, collects on 140/150 mm membrane filters. Microcomputer controlled gas collector for the automated dust sampling on membrane filters with a diameter of 140 mm or 150 mm ac. to EN 12341.

MCZ - Model LVS16 - Low Volume Sampler

by Umwelttechnik MCZ GmbH     Distributor in AUSTRIA

Microcomputer controlled gas collector for the automated dust sampling on membrane filters with a diameter of 47 mm or 50 mm in acc. with EN 12341. Automatic switching to sequentially admit up to 16 filters.

MCZ - Model HVS16 - High Volume Sampler

by Umwelttechnik MCZ GmbH     Distributor in AUSTRIA

Microcomputer controlled gas collector for the automated dust sampling on membrane filters with a diameter of 140 mm or 150 mm in acc. with EN 12341. Automatic switching to sequentially admit up to 16 filters.

ennox - Model CFP - Ceramic Fine Filter

by ennox biogas technology GmbH     based in Hard, AUSTRIA

Gas from bio or sewage processing systems are often contaminated with water vapour or very sparsely distributed small particulate matter, which, when used for example in CHP units can cause operating problems or either damage. For the fine cleaning of the gases before utilization an ennox ceramic fine filter is used.

MCZ - Model CMK5 - Calibration System

by Umwelttechnik MCZ GmbH     Distributor in AUSTRIA

The calibration system serves the mandatory zero and end point verification of gas analyzers, especially those in automated measuring networks. The zero and end points are verified with a signal from the measuring network computer; the calibration can also be activated with the keyboard at the front of the CMK.

MCZ - Model MK5 / MK10 - Calibration System

by Umwelttechnik MCZ GmbH     Distributor in AUSTRIA

The calibration system MK5/MK10 is equipped with standard modules for the different methods of generating span gas based on the specific application. The generated span gas is provided depressurized for output. The MK5 series can be equipped with max. 5, the MK10 series with max. 10 modules. Used to calibrate gas analyzers in labs, service ...

MCZ - Model MK2 - Calibration System

by Umwelttechnik MCZ GmbH     Distributor in AUSTRIA

The calibration system serves the mandatory zero and end point verification of gas analyzers, especially those in automated measuring networks. The use of permeation tubes instead of bottled span gases yields a reasonably priced solution for the span gads generation of, for example, SO2 or hydrocarbon components.

Thermo Scientific™ - Model 253 Ultra™ - High Resolution Isotope Ratio Mass Spectrometer

by Thermo Fisher Scientific     Distributor in AUSTRIA

The new Thermo Scientific™ 253 Ultra™ high resolution isotope ratio mass spectrometer revolutionizes the measurement of site-specific and clumped-isotope-ratio analysis of molecules. Analysts now get direct access to the conditions under which molecules were formed, how they were transported, stored and degraded. This will enable new ...

Need help finding the right suppliers?

Let the XPRTs do the work for you