gas divider Equipment | Environmental XPRT

Premium

Environics - Model Series 4040 - Advanced Automotive Gas Divider

The Environics® Automotive Gas Divider is an advanced instrument for the dynamic calibration of automotive or mobile source emissions analyzers. This system stands out from competitors in its ability to generate infinitely varied concentrations within the operating range of the instrument, protecting ...

By Environics, Inc. based in Tolland, CONNECTICUT (USA). from Gas Dilution and Gas Divider Systems Product line

Premium

Environics - Model Series 4040 - Volatile Organic Compounds (VOC) Gas Dilution System

The Environics® Series 4040 VOC Gas Dilution System is a microprocessor based gas dilution system specifically designed for the preparation of calibration standards used for VOC (Volatile Organic Compounds) monitoring programs. This system stands out from competitors in its ability to generate infinitely ...

By Environics, Inc. based in Tolland, CONNECTICUT (USA). from Gas Dilution and Gas Divider Systems Product line

EUCA Sonimix - Model 2106 - LCD Gas divider / Gas mixer

The binary gas divider from 0 to 100% in fixed steps, model LNI SONIMIX 2106‐LCD is based on the principle of gas stream through sonic nozzles (ISO 6145‐6 technology) and is built according to the ISO 6145/6 normalization. Most accurate device on the market (0.5% rel.). SONIMIX 2106‐10 – ...

By EUCA Science & Technology Co., Ltd. based in Beijing, CHINA. from Gas Calibrator Product line

Model 600 SGD - Gas Divider

user levels to protect from unauthorized changes of internal parameters. The internal gas list is used to store various gases and user friendly software allows simple operation. Serial interface via RS 232 and TCP/IP allows the divider to be used with an external PC for programmed automatic operation. The Model 600 ...

By California Analytical Instruments, Inc. (CAI) based in Orange, CALIFORNIA (USA). from Specialty Products Product line

Premium

Environics - Model Series 4040 - Continuous Emissions Monitoring (CEM) Calibration Systems

The Environics Continuous Emissions Monitoring Calibration Systems (CEMCS) have been used in CEM vans and laboratories for over twenty-five years. They meet or exceed the performance requirements of the United States EPA 40 CFR Part 51 Method 205 Appendix M. The accuracy and repeatability make them the unit of choice for source testers around the world. ...

By Environics, Inc. based in Tolland, CONNECTICUT (USA). from Gas Dilution and Gas Divider Systems Product line

Premium

Environics - Model Series 4040UHP - Ultra-High Purity (UHP) Gas Dilution System

Purity of calibration gases is assured with the Series 4040 Ultra-High Purity (UHP) Gas Dilution System. Manufactured with metal seal MFC’s and orbitally welded joints, the system has minimal dead volume and maintains a low leak rate to prevent atmospheric contamination of gas calibration standards. An ...

By Environics, Inc. based in Tolland, CONNECTICUT (USA). from Gas Dilution and Gas Divider Systems Product line

Premium

Environics - Model Series 4040 - Computerized Gas Dilution System

The Environics® Series 4040 is a computerized gas dilution system that automatically generates precise gas standards for rapid multi-point calibration of analyzers. The gas mixes can be used in generating precise gas calibration standards, creating gaseous atmospheres or producing gas mixes for analytical ...

By Environics, Inc. based in Tolland, CONNECTICUT (USA). from Gas Dilution and Gas Divider Systems Product line

Showcase

Sonimix - Model 2130 - NOx Converter Tester

The Sonimix 2130 NOx converter tester has been designed to generate a stable NO2 concentration with a small reaction time. It is based on the sonic nozzles technology (ISO 6145-6 technology) and high stability pressure regulators. The NOx converter tester is often used together with a multi-steps gas divider ...

By LNI Swissgas based in Versoix, SWITZERLAND. from Premium Gas Calibration Systems - Gas Calibrators Product line

Model BetaCAP30 - Gas Diluter

BetaCAP30 is a gas divider that uses 30 capillaries, to operate 31 dilution ratios (between 0 and 100% of the concentration to be diluted). The choice of 30 capillaries is not aimed at carrying out tests on 30 steps, but to increase the diluter application flexibility reducing the number of required ...

By Be.T.A. Strumentazione Srl based in Borgolavezzaro, ITALY. from Gas Diluters, Gas Calibrators, Gas Dividers Product line

Model BetaCAP60-3G - Double Gas Diluter

BetaCAP60-3G is a 60-step diluter, capable of diluting 2 gases in a diluting gas, in any relationship between them. BetaCAP60-3G was created to satisfy the need of combining linearity tests with the possibility of performing interference tests. For this purpose, having two components (measuring and interfering) ...

By Be.T.A. Strumentazione Srl based in Borgolavezzaro, ITALY. from Gas Diluters, Gas Calibrators, Gas Dividers Product line

Model BetaCAP30X100 - Gas Diluter With Two Diluting Range

BetaCAP30X100 is a gas divider in two stages with 100 + 30 equal capillaries, designed to operate 31 dilution ratios linearly scaled between 0 and 100%) and 30 more between 3.000: 1 and 100: 1. While the first range of dilutions gets the main application of the analyzers for emissions, the second is aimed to ...

By Be.T.A. Strumentazione Srl based in Borgolavezzaro, ITALY. from Gas Diluters, Gas Calibrators, Gas Dividers Product line

Model BetaCAP60X100 - Compact Gas Diluter With 3 Inputs Pre-Dilution Systems

, electronic pressures control and manifold construction in highly corrosion-resistant materials. Very similar to the BetaCAP60-3G model, is distinguished only by the addition of a module pre-divider by 100, inserted in series at the TG1 gas inlet ...

By Be.T.A. Strumentazione Srl based in Borgolavezzaro, ITALY. from Gas Diluters, Gas Calibrators, Gas Dividers Product line

Showcase

MCZ - Model EasyCal - Gas Calibration Systems

Mix your gases now. The intuitive touch display guides you through the settings. Place up to 10 different recipes and call them with a "touch". You do not need any previous knowledge or external PC software. Incorrect operation? Impossible! Another plus: as a mobile variant, the EasyCal is no bigger than a make-up ...

By Umwelttechnik MCZ GmbH based in Bad Nauheim, GERMANY. from Gas Compounding / Gas Analysis Calibration Systems - Simple Calibration Systems Without Controller for Span Gas Calculations Product line

Premium

Environics - Model Benchtop - Gas Mixing and Gas Dilution System

The optional Benchtop configuration provides the same high quality you are accustomed to with Environics Gas Mixing and Gas Dilution Systems, but in a smaller package. Perfect for labs or for those with limited space. Most basic configurations are available with this design. ...

By Environics, Inc. based in Tolland, CONNECTICUT (USA). from Environics Gas Flow Management Custom Options Product line

Premium

Gas Endeavour - Model III - Low Gas Volume and Flow System

High accuracy and precision: Gas Endeavour III is an advanced laboratory instrument platform designed for precise evaluation of gas production or consumption in both batch and continuous processes. With its fully automatic operation, user-friendly interface, and high reliability, Gas Endeavour III offers ...

By BPC Instruments AB based in Lund, SWEDEN.

Premium

Teledyne - Gas Delivery Unit Net - Calibration Station

The Gas Delivery Unit (GDUnet) automates the essential task of regular instrument bump testing and calibration, ensuring that the Gasurveyor family of instruments are functioning ...

By Teledyne Gas and Flame Detection based in Arras Cedex, FRANCE. from Gas Measurement - Accessories Product line

Premium

Gascoseeker - Model 2-500 - Portable Gas Leak Measurement Device

Built on the success of the robust and reliable Gascoseeker MK2, the Gascoseeker 2-500 is the UK gas industry standard instrument for measuring % LEL and % volume flammable hydrocarbons, with over 20,000 instruments in use in the UK gas industry. The two-button operation means the Gascoseeker 2-500 is easy to ...

By Teledyne Gas and Flame Detection based in Arras Cedex, FRANCE. from Gas Measurement Devices Product line

Premium

Teledyne - Model 100 - Toxic Gas Sensor

affordable, and durable gas detection sensor without compromising ...

By Teledyne Gas and Flame Detection based in Arras Cedex, FRANCE. from Fixed Gas Detectors Product line

Premium

Oxygas - Model 500 - Portable Gas Leak Detector

The Oxygas 500 compliments the Gascoseeker 500 with a similar performance, measuring % LEL and % volume flammable hydrocarbons, but with the addition of oxygen for either gas/air or gas/nitrogen/air purging. The Oxygas 500 has the following additional features; automated zero during start-up, manually selectable ...

By Teledyne Gas and Flame Detection based in Arras Cedex, FRANCE. from Gas Measurement Devices Product line

Premium

MCZ - Gas Sensor Test Bench System

Automatic test bench to test gas sensors for response values, interference sensitivity, contamination, ...

By Umwelttechnik MCZ GmbH based in Bad Nauheim, GERMANY. from Specialized Systems Product line