Gas Flow equipment in Australasia

  • Premium

    Model VCEM5100 - Flue Gas Flow Monitor

    The VCEM 5000/51000 represents the latest generation of CODEL’s uni ue flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime ...

    By Codel International Ltd Distributor in Lane Cove West, AUSTRALIA. from Flow Monitors for Stack Emissions Product line

  • Premium

    HORIBA - Model GA-360E/F360E Series - Trace Gas Monitor

    The GA-360E/F360E Series is a line up of units that provide ultrahigh sensitive, highly accurate, continuous monitoring of trace amounts of impurities contained in gases (N2, O2, He, Ar, H2, and Air) used in the semiconductor manufacturing process. Utilizing a cross-modulation method, GA-360E/F360 Series units have no zero drift due to the ...

    By HORIBA Europe GmbH Office in AUSTRALIA. from Process & Environmental - Ambient Monitoring Product line

  • FLUXUS - Model G608 - Portable Gas Flow Meter

    The FLUXUS G608 portable gas flow meter is based on the widely used, highly reliable and versatile G601, but has been specifically engineered for its use within hazardous areas and is covered by ATEX, IECEx and FM certification. It is the ideal solution for gas flow measurement in potentially explosive areas, may it be for a temporary replacement ...

    By Flexim GmbH Office in Bayswater, AUSTRALIA. from Portable Flowmeters for Gases Product line

  • Premium

    Model VCEM5000/5100 - Gas Velocity Monitor

    The VCEM 5000/51000 represents the latest generation of CODEL’s unique flow monitors. These systems measure the velocity of stack gases using a highly accurate time of flight measurement that is derived from a cross correlation analysis of the infra-red emissions of the turbulent gas. Two robust infrared detectors are used for the prime ...

    By Codel International Ltd Distributor in Lane Cove West, AUSTRALIA. from Flow Monitors for Stack Emissions Product line

  • PIKE - Heated Gas Flow Cell Assembly

    The Heated Gas Flow Cell is recommended for high-performance FTIR sampling of flowing gas samples. The beam conforming design of the cell provides for minimum cell volume, maximum throughput, and a 100 mm pathlength. The gas cell may be heated up to 300 °C to prevent condensation of ghier molecular weight gas species.

    By PIKE Technologies Distributor in Mount Warren Park, AUSTRALIA. from Gas Sampling Product line

  • Showcase

    ACME - Model CO2-EN Series - Carbon Dioxide Monitor-Controller

    Single-point sample-draw CO2 monitoring for indoor air quality or industrial applications utilizing infrared sensor technology. Digital readout of PPM CO2 levels, up to 4 relay outputs, analog voltage/current output signal. Different detection ranges available.

    By Acme Engineering Prod. Ltd. Distributor in Slacks Creek Qld Jamison, AUSTRALIA. from Gas Detection Equipment Product line

  • Premium

    Sonimix - Model Sx 7100 - Gas Mixer

    The Sonimix 7100 is based on the principle of gas flow through Mass Flow Controllers (MFC’s) and is built according the ISO 6145/7 norm. It generates multi gas mixtures and covering up to three concentrations decades (multi-range).

    By LNI Swissgas SA Distributor in AUSTRALIA. from Gas Mixers Product line

  • Premium

    Sonimix - Model Sx 2106 - Gas Divider

    The Sonimix 2106 is based on the principle of gas flow through sonic nozzles and is built according the ISO 6145/6 norm. It generates binary mixtures from 0 to 100% in fixed steps.

    By LNI Swissgas SA Distributor in AUSTRALIA. from Gas Mixers Product line

  • Premium

    LNI - Model Mistral ONE - Membrane Nitrogen Generators

    The NitroGen series Mistral One are Membrane Nitrogen  Generators. They are engineered to transform standard compressed air into a safe regulated supply of Nitrogen with a purity up to 99.5%. An optional channel can provide up to 40 L/min of compressed, dry and regulated air. The exclusive electronic flow control allows to generate Nitrogen ...

    By LNI Swissgas SA Distributor in AUSTRALIA. from Gas Generators Product line

  • Premium

    Sonimix - Model 6000 C2 - Station Calibration Systems

    The Sonimix 6000 C2 is the station calibration system per excellence. The multigas Mass Flow controller calibrator with GPT, ozone and self regenerable zero air generator, Sonimix 6000 C2, is an instrument designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, such as SO2, HC, BTX, ...

    By LNI Swissgas SA Distributor in AUSTRALIA. from Gas Calibrators Product line

  • Premium

    Cerex - Model 1cm - Flow Through Calibration Cell

    The 1cm calibration cell is made from quartz allowing clear transmission in deep UV.

    By Cerex Monitoring Solutions, LLC. Office in Caringbah, AUSTRALIA. from Gas Cells Product line

  • Premium

    LNI Swissgasn - Model HG 6.0 - HydroGen Gas Generator

    The HydroGen series HG 6.0 is able to generate up to 1.3L/min Hydrogen with purity better than 99.9999% and  pressure up to 16 bar (232 PSI). The HG 6.0 includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water.  No acid or alkaline solutions are used. The innovative gas drying system (A ...

    By LNI Swissgas SA Distributor in AUSTRALIA. from Gas Generators Product line

  • Premium

    Sonimix - Model 6000 C1 - Multipoint Multigas Calibrator

    Due to its permeation tubes this instrument is appreciated in the area where the supplying in gas cylinder is difficult or complicated. The Multipoint Multigas Calibrator Sx 6000C1 is an instrument designed to calibrate manually or by remote control up to 5 gas monitors installed in an Air pollution monitoring station, such as SO2, HC or BTX, CO, ...

    By LNI Swissgas SA Distributor in AUSTRALIA. from Gas Calibrators Product line

  • Premium

    AirGen - Model ZA FID Air - Hydrocarbon Free Air Generator

    The AirGen series ZA FID Air is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the ZA FID Air can filter up to 15 L/min of compressed Air and can withstand a pressure up to 7 bar (101 PSI). The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium. ...

    By LNI Swissgas SA Distributor in AUSTRALIA. from Gas Generators Product line

  • Premium

    AirGen - Model ZA-HC & ZA-Total - Gas Generators

    The AirGen series ZA-HC is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. If higher purity is requested, then the ZA-Total will also remove other pollutent like Humidity, CO2, CO, NOx, SO2 and Hydrocarbons. Very small in size, the ZA-HC and ZA-Total can filter up to 30 L/min of compressed Air and can ...

    By LNI Swissgas SA Distributor in AUSTRALIA. from Gas Generators Product line

  • Premium

    LNI Swissgas - Model HG 5.0 - Hydrogen Generator

    The HydroGen series HG 5.0 is able to generate up to 700 mL/min Hydrogen with purity better than 99.999% and  pressure up to 16 bar (232 PSI). The HG 5.0 includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using distilled water.  No acid or alkaline solutions are used. The inovative drying system  ...

    By LNI Swissgas SA Distributor in AUSTRALIA. from Gas Generators Product line

  • Premium

    Geotech - Oil Water Separator

    Our Oil Water Separator is for the separation of LNAPL, DNAPL product from source which is contaminated. The product is separated through liquid flow by passing through a media pack allowing for product, water, solids separation oven a given time, maximum flow rate for the unit being no greater than 60Lt min.

    By Geotech Distributor in Scoresby, AUSTRALIA. from Portable Gas Analysers Product line

  • Premium

    Gasmet - Portable Calibrator

    The portable calibrator is one of the most important tools in generating new applications for the FTIR gas analyzer. The calibrator incorporates a syringe pump, a manual needle valve, a mass flow meter, and a stainless steel injection chamber. The syringe pump injects precise amounts of liquid or gas into a hot nitrogen gas flow, thus producing a ...

    By Gasmet Technologies Oy Distributor in AUSTRALIA. from Portable Gas Analyzers Product line

  • Premium

    Geotech - Model AP2 - Bottom Inlet Short and Top Inlet Short AutoPumps

    Total fluids pump for harsh liquids in landfill, petrochemical brownfield and remediation industries. The AP2 Bottom Inlet Short and the AP2 Top Inlet Short AutoPumps both provide maximum capabilities and flow in a pump for 2“ (50 mm) diameter wells.

    By Geotech Distributor in Scoresby, AUSTRALIA. from Portable Gas Analysers Product line

  • Premium

    ProMinent DulcoFlow - Flow Meter

    For the measurement of pulsating volumetric flows in the range of 0.03 ml/stroke – 5 ml/stroke. The flow meter DulcoFlow® reliably measures pulsating flows in the range above 0.03 ml/stroke based on the ultrasound measuring principle. The flow meter achieves maximum chemical resistance, as all wetted parts are made of PVDF and PTFE.

    By ProMinent Group - ProMinent GmbH Distributor in Belrose, AUSTRALIA. from Measuring, Control and Sensor Technology Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you