Showing results for: Gas Flow Monitoring Equipment Near Benin
-
Manufactured by AGC Instruments Ltd.based in IRELAND
The Series 5X00-PZ analyser is for use in hazardous Zone 1 and Zone 2 areas. Housed in a purged enclosure under the control of Gönnheimer Purge Controllers, the ATEX units have ‘Ex-Protection Bypass’ controls. The enclosures contain a custom-designed tray which slides out for easy access to the AGC Series 50 Analyser ...
-
Manufactured by AGC Instruments Ltd.based in IRELAND
Using the AGC High Sensitivity Thermal Conductivity Detector (TCD), the 50 Series Continuous Gas Analyser is customised to meet your exact requirements. This range of Binary Stream Gas Analysers contains a temperature controlled Thermal Conductivity Detector (TCD) which enables it to be used in continuous monitoring applications with minimum ...
-
Manufactured by Cimarronbased in USA
Flow Rate can be measured in CFM, CFH, MCFH or MCFD. The current flow rate (CFR) is displayed on the LCD screen. User defined log interval from 1 second to 10 minutes. The logs can be saved to a USB key and opened in Excel. The logs include the flow rate, minimum flow rate, maximum flow rate, and average (median) ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
and monitoring of gas flow as well as gas quality. In addition to efficient process control and energy balancing, Heartbeat Technology ensures compliance and process safety at all ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
The flowmeter with long-term stability and a keen sense for utility gases ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
and monitoring of gas flow as well as gas quality. In addition to efficient process control and energy balancing, Heartbeat Technology ensures compliance and process safety at all ...
-
Manufactured by Peiyang Chemical Equipment Co., Ltd.based in CHINA
After compression, the feed gas is processed by dehydration and heavy hydrocarbon separation units. Please see the attached PFD. Process description is detailed as ...
-
Manufactured by Agilent Technologies, Inc.based in USA
The 7890B GC System has been discontinued but is still being supported by Agilent and accessories can still be purchased. Units may be available through the Agilent Refurbished Instruments program. For our latest gas chromatography systems, which provide advanced capabilities and benefits, please see the 8890 GC, Intuvo 9000 GC, and 8860 ...
-
Manufactured by Agilent Technologies, Inc.based in USA
The 7890B GC System has been discontinued but is still being supported by Agilent and accessories can still be purchased. Units may be available through the Agilent Refurbished Instruments program. For our latest gas chromatography systems, which provide advanced capabilities and benefits, please see the 8890 GC, Intuvo 9000 GC, and 8860 ...
-
Manufactured by QED Environmental Systemsbased in USA
production. Easy installation and maintenance of the Accu-Flo wellheads help to maximize gas recovery while minimizing surface emissions and subsurface migration. The pitot tube wellhead design is available with a standard gate valve or with our Exact-Flo control valve. The Exact-Flo valve represents a new generation of flow control devices. The conical ...
-
Manufactured by Madur Polska Sp. z o.o.based in POLAND
GA-12plus hand-held analyser that can be equipped with up to 4 EC cells. Larger cousin of GA-12 analyser that share very similar functionality and options. Thanks to larger housing fits more sensors, is equipped with Li-ion battery by default. Manufactured according to the principles of ...
-
PremiumManufactured by ENVEAbased in FRANCE
The PCME STACKFLOW 400 is an advanced flue gas flow measurement system for continuous monitoring of releases from industrial sources complying with European monitoring standard EN 16911-2:2013 and ...
-
PremiumManufactured by ENVEAbased in FRANCE
Dusty is a filter monitor that works on a triboelectric ...
-
PremiumManufactured by ENVEAbased in FRANCE
Cost effective broken bag detection. A simple solution to identify failure of a fabric filter baghouse, cartridge filters or cyclones. Ideally suited to applications from 0.1 mg/m3, it provides an immediate alarm in case of a filter ...
-
PremiumManufactured by ENVEAbased in FRANCE
The ProSens was specially developed to carry out reliable dust measurement on clean sides after ...
-
PremiumManufactured by ENVEAbased in FRANCE
Provides continuous measurement values for dust concentration as a trend signal or absolute values. The ProSens has been specially developed to carry out reliable dust measurement on clean sides after filters. The measuring device provides measurement values for dust concentration, either as a trend signal or as absolute values (after calibration) for emission ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
The CEM500-L is an extractive online gas analyser for Continuous emission monitoring (CEMS). It is specifically dedicated to the new low level emission Regulations known as 50/30/5/3 (50 mg/Nm3 NOx, 30 mg/Nm3 SO2, 5 mg/Nm3 particles, 5 μg/Nm3 mercury) and also to chemical processes requiring low values of H2S. This new model is based on a ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
The CEM400 is an extractive online gas analyser dedicated to Continuous Emission Monitoring. It is based on UV spectroscopy that brings a higher sensitivity than infra-red and gives the possibility to measure several gases simultaneously. A high selectivity is achieved by a fast Fourier transform (FFT) on the absorbance spectrum for all the ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
The CEM500 is an extractive online gas analyser dedicated to Continuous Emission Monitoring. This new model is based on a 2048 pixels CCD (charge-coupled device) giving a higher resolution (0.1 nm) and a longer lamp life time (3 years) It is based on UV spectroscopy that brings a higher sensitivity than infra-red and gives the ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
The EXM500-L is an extractive online gas analyser for Continuous emission monitoring (CEMS). It is specifically dedicated to the new low level emission Regulations known as 50/30/5/3 (50 mg/Nm3 NOx, 30 mg/Nm3 SO2, 5 mg/Nm3 particles, 5 μg/Nm3 mercury) anda lso to chemical processes requiring low values of H2S. This new model is based on a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you