Gas Sampling Device Equipment In Europe
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
Tekran and VE Technology have partnered together to improve the quality of Natural Gas sampling and analysis. Proper sample collection requires precision equipment to assure mercury is quantitatively transported between the source pipeline and the sample collection device. The Tekran 2642 Natural ...
-
Manufactured by Union Instruments GmbHbased in GERMANY
The Multigas-Analyzers of the INCA1011 series are designed for indoor installation and the analysis of condensate-free sample gas under pre-pressure. The device can be equipped with 1 sample gas inlets and 2 calibration gas ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For extractive gas analysis. For emission and process monitoring. For continuous condensate removal, e.g. at sample gas coolers. For connection at condensate outlets at device bottom of the JCT-sample gas coolers. Only for applications with pressure above atmospheric ...
-
Manufactured by Union Instruments GmbHbased in GERMANY
The Multigas-Analyzers of the INCA1021 series are designed for indoor installation and the analysis of condensate-free sample gas with or without pre-pressure. The device can be equipped with 1 sample gas inlet and 2 calibration gas ...
-
Manufactured by Union Instruments GmbHbased in GERMANY
The Multigas-Analyzers of the INCA3011 series are designed for indoor installation and the analysis of condensate-free sample gas with or without pre-pressure. The device can be equipped with up to 6 sample gas inlets and 1 calibration gas ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
Our standard odour sampling device consists of a vacuum container that is evacuated by a vacuum pump. The sampling point and the standard sampler are connected by a probe. When the sampling device is evacuated, the gas sampling bag inside sucks in sample air ...
-
Manufactured by Samplebags.eubased in NETHERLANDS
The Nalophan Gas Sampling Bags have been designed especially to respond to the quality requirements of EN 13725:2003 and ISO 17025, to minimize the risk of contamination of odour samples. The bags have an approximate capacity of 10l or 60l depending which sampling device is used. These Gas ...
-
Manufactured by Ionicon Analytik Ges.m.b.H.based in AUSTRIA
Multiport sampling devices, based on multiplexing valves or custom built gas-stream selectors allow for sampling at different location and bring down your cost per sampling ...
-
Manufactured by JCT Analysentechnik GmbHbased in AUSTRIA
Applications: For extractive gas analysis For emission and process monitoring For continuous pumping of sample gas For installation in gas analysis systems Suitable for mobile devices Applicable for long tube and hose ...
-
Manufactured by WITT-Gasetechnik GmbH & Co KGbased in GERMANY
OXYBABY O2/CO2 is the practical battery-operated hand held gas analyser for measurement of modified atmospheres in food packages (MAP). The gas analyser OXYBABY is the perfect device for mobile, fast and accurate samples: at the packaging machine, in packages or in the laboratory. The small, high capacity gas ...
-
based in USA
sample injection times, and create data reports. The Gas Auto-sampler is a stand-alone device that delivers samples to the GC through a heated bridge, eliminating cold spots along the sample path. The system performs a purge and vacuum step between each sample injection to minimize ...
-
Manufactured by Olfasense Groupbased in NETHERLANDS
The CSD30 is a sampling device for collecting air (odour) samples in gas sampling bags, with a default odour sampling duration of 30 minutes. Using the lung principle, the sample flows into the gas sampling bag through the ...
-
based in USA
The Wasson-ECE Dynamic Blender is a simple, portable blending device that dilutes a sample or certified standard with a diluent gas of choice. The device contains a digital mass flow controller (MFC) that allows the diluent gas flow to be easily adjusted. An inert flow path and heated bridge eliminate adsorption ...
-
Manufactured by AMS Analiticabased in ITALY
The GasCheck Basic sorbent tubes sampling devices, should be connected with a portable AirCube sampling pump, in both models COM2-TH and Gas-Pro. Each GasCheck basic, consist of 6 sorbent tube sampling support for standar chemical sorbent tubes or thermal desorption 6,35 mm OD sorbent ...
-
Manufactured by DOD Technologies Incbased in USA
The versatile PS-7 Single Point Gas Detector monitors a wide range of toxic and combustible gases, as well as oxygen depletion. This reliable system utilizes four different detection principles (electrochemical, hot-wire, galvanic, catalytic bead) and target gas-specific sensors. The device can extract a sample from up to 75 feet ...
-
Manufactured by DOD Technologies Incbased in USA
The XP-702III-A Handheld Combustible Gas Detector detects gases that burn in as little as ten seconds. The extractive pump draws samples that locate even trace amounts of combustible gas. The device provides auto-zeroing, an automatic stop pump function and a long battery life. It can run for 12 continuous hours on two AA ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
minute on a sequential basis, and the samples are passed across one to four gas sensors. Filters, flow-fail devices, internal gas leak detectors and flame arrestors are fitted to ensure safe and reliable operation at all times. Sample and purge times are fully adjustable, and a specific sample ...
-
Manufactured by Thermo Fisher Scientific Australia Pty Ltdbased in AUSTRALIA
The Gas Dilution System (GDS) is an easy to use electronic device designed to take a known calibration gas or gas sample and dilute it to lower concentrations. he diluted gas output can be used for calibrating gas detection instruments or can be presented to gas ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
HORIBA gas samplers are suitable for volume-correct taking of gaseous samples during emission and emission measurements. This device can be used wherever gases and gaseous components must be ...
-
Manufactured by Sea Marconi Technologies s.a.s.based in ITALY
This tool-set allows the hydraulic connection of the sampling pipe to the bottom valve of the tank (GAS screw type) or to the valve of the Buchholz relay and similar devices (DGPT2). ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you