gas sampling system equipment in Pennsylvania

  • Premium

    AMETEK PI - Model ta3000 - Gas Analyzers

    AMETEK PI - Model ta3000 - Gas AnalyzersTrace Level Gas Monitoring For Bulk Gas, Environmental and Research Laboratory Applications. The Trace Analytical ta3000 series, manufactured by AMETEK Process Instruments, is a family of instruments designed to monitor trace levels of specific impurities in bulk gases, environmental applications and ...

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Gas Analyzers Product line

  • Premium

    DyMaxion - Enclosed Ion Source Gas Analyzer

    Increased sensitivity and decreased background noise are possible due to the ionizer design. An enclosed ion source operates with sample pressures as high as 10-3 torr with no need for futher pressure reduction of this differentially pumped inlet system. Higher sample pressures contain greater numbers of neutrals and more sample to ionize. With ...

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Enclosed Ion Source Gas Analyzer Product line

  • Model MAK Series - Sample Gas Conditioners

    The MAK series Sample Gas Conditioners provide clean dry gases to extractive gas analyzers for continuous emission monitoring and process control. The Alfa Laval MAK Sample Gas Conditioner is an essential part of any extractive gas analyzer system. This unit will continuously dehumidify a sample stream and rapidly separate the condensable liquids ...

    By PACE Environmental based in Whitehall, PENNSYLVANIA (USA). from Sample Gas Conditioners Product line

  • Portable Sample Gas Conditioning System

    Portable gas conditioning system - perfect for CO or CO/O2 monitoring. All components mounted on a wheeled cart for ease of portability. Components consists of a vacuum pump, sample gas conditioner with water intrusion sensor, peristaltic pump, flow control panel, and a filter assembly.

    By PACE Environmental based in Whitehall, PENNSYLVANIA (USA). from Portable Sample Gas Conditioning System Product line

  • Model A21 - Gas Sampler

    The model A21 is a gas sample pumping system designed to draw samples from ducts or hard to access locations and deliver the samples to gas sensors located in a more convenient area. A21 Sampling Systems use a high quality diaphragm pump operated by a brushless DC motor to provide continuous sampling over long periods of time. Sampling pumps are ...

    By Analytical Technology, Inc. (ATI) based in Collegeville, PENNSYLVANIA (USA). from Gas Sampler Product line

  • Premium

    E Instruments - Sample Conditioning Unit

    The accurate emissions monitoring of soluble gases, present in flue gas from industrial and commercial processes, requires a sampling system designed to prevent significant loses of the SO2 and/or NO2 gases in the sampling lines prior to entering the analyzer or measuring device.

    By E Instruments International, LLC based in Langhorne, PENNSYLVANIA (USA).

  • Premium

    Dycor - Benchtop Gas Analyzer

    The Dycor Benchtop Mass Spectrometer is a compact versatile gas analysis system for sampling gases over a wide range of pressures, from high vacuum up to and beyond atmospheric pressure. The analyzer and inlet system can be removed from the frame and placed up to 10 feet from the pumping station using the included cable and vacuum hose.

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Benchtop Gas Analyzer Product line

  • Premium

    AMETEK PI - Model 292B - Portable Natural Gas Chromatograph

    The AMETEK Model 292B natural gas chromatograph is designed as a truly ‘portable’ analyzer. An integrated sample inlet manifold allows for single connections of sample and drive (carrier) gases, allowing for flexible installation either as a stand-alone analyzer, or integrated onto a mobile platform such as a truck or other vehicle. ...

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Portable Natural Gas Chromatograph Product line

  • Premium

    THERMOX - Model CMFA-P2000 - Portable Premix Gas/Flue Gas Analyzer

    The CMFA-P2000, (Combustion Mix Flue Gas Analyzer), was designed specifically to meet the dual furnace combustion requirements of glass container manufacturing plants. Using a highly reactive bare platinum zirconium oxide cell, the analyzer is capable of measuring excess oxygen in post combustion flue gas or excess oxygen to excess fuel in ...

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Portable Premix Gas/Flue Gas Analyzer Product line

  • Premium

    Model 919 - Hot/Wet Single Gas Analyzer

    The Model 919 is specifically configured for monitoring stack emissions on a concentration basis. With the addition of an optional zirconium oxide sensor, the Model 919 is capable of monitoring oxygen. Robust and reliable analyzer, the Model 919 has no-moving-parts, UV-based measurements do not suffer from H2O and CO2 interference. This greatly ...

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Hot/Wet Single Gas Analyzer Product line

  • Custody Transfer Crude Oil Sampling Systems

    Over the past two decades our organization has supplied numerous liquid sampling systems for international clients. Sampling systems for fiscal measurement can be designed and fabricated by EESIFLO to meet standards such as API 8.2 and ISO 3171. One of the very important aspects of taking a pipeline sample is the ability to create a homogeneous ...

    By EESiFlo based in Mechanicsburg, PENNSYLVANIA (USA). from Custody Transfer Crude Oil Sampling Systems Product line

  • Premium

    Model 934 - Sensor Specific Gas Analyzer

    The Model 934 is a rugged, analyzer adapted from the Model 931/932 UV analyzer platform for measurement of Hydrogen in Tail Gas Treating Units (TGTU) where the UV (H2S) is not required. The Model 934 analyzer system has a heated cell to avoid and hydrocarbon or water condensation.  A fully integrated AMETEK Process Instruments sample system ...

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Sensor Specific Gas Analyzer Product line

  • Premium

    Codel - Model GCEM4100 - Multi Channel Extractive Flue Gas Analyser

    The GCEM4100 is a hot extractive analyser for difficult flue gas monitoring applications. It uses infrared absorption spectroscopy to measure up to seven pollutant species in a single self-contained unit. Many conventional extractive systems require the sampled gas to be cleaned and dried to a very high standard prior to analysis, invariably ...

    By Codel International Ltd Office in Keswick, PENNSYLVANIA (USA). from Multi Channel Extractive Flue Gas Analyser Product line

  • Model 28520-U - ATIS Adsorbent Tube Injector System 110V

    The Supelco ATIS is a sample preparation device for adsorbent tubes. The Adsorbent Tube Injector System employs the technique of flash vaporization to vaporize the sample into a continuous flow of an inert gas, which carries the sample to the adsorbent tube. The sample pathway of the Adsorbent Tube Injector System is constructed of glass and ...

    By MilliporeSigma based in Bellefonte, PENNSYLVANIA (USA).

  • Model 28521-U - ATIS Adsorbent Tube Injector System 230V

    The Supelco ATIS is a sample preparation device for adsorbent tubes. The Adsorbent Tube Injector System employs the technique of flash vaporization to vaporize the sample into a continuous flow of an inert gas, which carries the sample to the adsorbent tube. The sample pathway of the Adsorbent Tube Injector System is constructed of glass and ...

    By MilliporeSigma based in Bellefonte, PENNSYLVANIA (USA).

  • Model Mini-ICS XP - Oxygen Monitoring System (OMS)

    The Mini-ICS XP cart system combines the convenient mobility of a portable cart with a complete oxygen monitoring and inert gas control system. Designed for use in hazardous areas, the system provides all of the components required to quickly and safely connect the cart to a process vessel and start monitoring and controlling oxygen levels. Robust ...

    By Neutronics, Inc based in Exton, PENNSYLVANIA (USA). from Oxygen Monitoring System (OMS) Product line

  • Premium

    AMETEK PI - Model IPS-4 - Integrated Photometric Spectrometer

    AMETEK Process Instruments Model IPS-4 is a huge step forward in capability and reliability for process spectrophotometers. The IPS-4 is capable of measuring up to eight wavelengths in a gas or liquid phase sample. Sample handling and conditioning systems are available as an option that is integrated into the IPS-4's sample cell enclosure.

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from Integrated Photometric Spectrometer Product line

  • Model 21 Series - Intrinsically Safe Positive Pressure Driven Sampler

    For the Model 21 Series Sample Conditioning Package, continuous positive pressure in the process vessel or system provides the force that pushes the sample gas from the process to the sensor. Suitable for applications with process operating pressures between 5 and 300 psig, the Model 21 Series sampler includes a pressure reducing regulator to ...

    By Neutronics, Inc based in Exton, PENNSYLVANIA (USA). from Intrinsically Safe Positive Pressure Driven Sampler Product line

  • Intrinsically Safe Aspirator-Driven Sampler

    The Neutronics Sample Conditioning Package is designed to ensure that the oxygen sensor always has a clean, dry sample gas for accurate measurement. Process conditions that include corrosive chemicals, temperature extremes, and powders present signicant challenges. To deliver accurate and reliable gas measurement, sensors require a sample that is ...

    By Neutronics, Inc based in Exton, PENNSYLVANIA (USA). from Intrinsically Safe Aspirator-Driven Sampler Product line

  • Control Panels

    Each CEMSentry™3000 sample control system incorporates a series of valving to control of automatic daily calibrations, local (analyzer) and remote (probe) cal gas introduction, flow meters, temperature controllers, sample pumps, vacuum & pressure gauges, filters, alarms and gas conditioners. The sample control system is critical for ...

    By CEM Service Group, Inc. based in Bedminster, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you