Only show results in Texas? Ok

gas scrubber water equipment

  • Premium

    Thermoplastics Workshop

    The plastic in the universe of boiler and piping: Our thermoplastic Workshop in Tunisia is fully dedicated to plastic boiler and also to plastic piping. We offer you our know-how and technical processes for the manufacture of all types of plastic tanks, technical parts and piping. We use materials such as PVC, PVC / C, PPH - HDPE, PVDF, PTFE to ...

    By GCER based in Ksibet, TUNISIA. from Workshops Product line

  • Premium

    Dürr Megtec - Spray Dryer Absorber (SDA)

    Dürr Megtec spray dryer absorber (SDA) technology provides effective control of SOx and HCl by the injection of finely atomized alkaline slurries into the gas stream. With our semi-dry scrubber technology, all water evaporates so there is no liquid waste stream, unlike wet scrubbers.

    By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA). from Exhaust Gas and Air Pollution Control - Sorptive Processes Product line

  • Premium

    Mercury - Model LA-254 - LabAnalyzer

    Firmly adjusted optical system not requiring any additional adjustment, Short analysis times, Low reagent consuption, Automatic zero adjustment, For analyses to DIN 38406-12 / EPA 7470A / EPA 7471A), Measuring range 0.01 ppb ... 10 ppb, Peak method: mercury vapors cannot escape into the lab, Upgradable to VM-3000 Mercury Vapor Monitor.

    By ENVEA based in Poissy, FRANCE. from Laboratory Analyzers and Process Analyzers Product line

  • Tarmac - Model SR-091 - Thermal Soil Plant (30 TPH)

    Feed Bin: Feed Bin & Weigh Conveyor to Dryer. Dryer: 7’ x 35’ Diameter Direct Fired Dryer With 20 mm BTU/HR Burner. Cyclone: Vertical Cyclone. Oxidizer: Oxidizer With 22 mm BTU/HR. Heat Exchanger: Tubular Heat Exchanger With Fan. Evaporative Cooler: Vertical Down-Draft Water Based Evaporative Cooler. Scrubber/Acid Gas Scrubber: ...

    By Tarmac International, Inc. based in Lees Summit, MISSOURI (USA). from Used Equipment - Direct Fired Plants Product line

  • JINDUO - Gas - Liquid Separator

    The separator can install to the inlet and outlet of the air compressor. It can use for gas-liquid separation, gas phase demisting of the top of fractionating condenser cooler, different kinds of gas water scrubber and gas phase demisting of absorption tower and parsing tower.

  • Vertical Scrubber

    Pollutants from an industrial process may sometimes be toxic or otherwise harmful to people and the environment. Gas scrubbers are designed to remove water-soluble pollutants from air streams by absorbing the pollutants into circulating water which possibly also contains various chemical additives that improve the collecting efficiency. The ...

    By AB Arex based in Valdemarsvik, SWEDEN. from Scrubbers Product line

  • Quenchers

    A Quencher is used to cool the gas by saturating the gas with water and often together with a scrubber. A Quencher is often used in special metallurgical processes and is designed to suit the individual system design.

    By Pilum AB based in SWEDEN.

  • TAPC - Simple Water Scrubbers

    Simple water scrubbers rely on the solubility of the pollutant gas.  Many of these scrubbers do not recycle the scubbing liquor, simply sending it to waste or recovery. An example of this would be the removal of methanol (CH3OH) from a gas stream using only water. Methanol is highly soluble in water, but evolves back out of the water if ...

    By Environmental Group Limited (EGL) based in Notting Hill, AUSTRALIA. from TAPC - Gas Scrubber Product line

  • Model EPI - Gas Scrubber for the Production of Semiconductors

    VSS-Umwelttechnik supplies process gas scrubber which are specially designed for the separation of gases from epitaxy processes. Our PURGAVI type scrubber (see illustration) is suitable for processes during which trichlorosilane (TCS) and dichlorosilane (DCS) with hydrogen are employed as the carrier gas. When using concentrated lye, separation of ...

    By VSS-Umwelttechnik GmbH based in Troisdorf, GERMANY. from Industrial Sectors Product line

  • Model 8200/8300 Series - Safety Relief Valve

    Our 8200/8300 Series safety relief valves are engineered and manufactured to the highest standards and feature a high endurance soft seat which guarantees a bubble-tight seal for hundreds of “pops”. Our unique patented radius disc design guarantees dependable, repeatable relief even under the most difficult of conditions.

    By Taylor Valve Technology based in Oklahoma City, OKLAHOMA (USA). from Safety Relief Valves Product line

  • Gas Scrubber

    The scrubber is designed for the separation of odour, gas, and fumes, and operates according to the absorption principle. Gas and fumes contained in the waste air are first captured and then separated by an appropriate washing liquid. The KMA gas scrubber is characterized by high separation performance and low water consumption. The scrubber can ...

    By KMA Umwelttechnik GmbH based in Koenigswinter, GERMANY. from Other Products Product line

  • Frames - Gas Scrubbers

    Our clients apply gas scrubbers, gas filters and slug catchers for removal of entrained liquids and/or solids for offshore and onshore facilities. The treated gas can be used as fuel gas, lift gas or export gas. In order to meet stringent process guarantees, we design solutions that enhance the separation performance required for further gas ...

    By Frames based in Alphen aan den Rijn, NETHERLANDS. from Gas Product line

  • AAT - Acid Gas Air Scrubbers

    AAT acid gas air scrubbers are most effective when using caustic water as a reagent, but more soluble gases may be effectively scrubbed using only water. In some cases, special mist elimination techniques are used to prevent acidic ‘fog’ from exiting the air scrubber.

    By Advanced Air Technologies, Inc. based in Corunna, MICHIGAN (USA).

  • Scrubber

    A common way to clean gases today is to wash the gas with water. By adjusting the pH in water, any impurity can be selected to be absorbed to a certain extent. Through this sorting, the pollutants can be separated and disposed of in the easiest possible way.

    By Envibat AB based in Skellefteå, SWEDEN. from Gas Cleaning Product line

  • Ankersmid - Model AST & ATF - Gas Sample Tube

    Ankersmid sample tubes are selected according to specific applications. Influencing process parameter are the gas composition, water vapure saturation, dust loading, process temperature, pressure and the gas velocity.

    By Ankersmid Sampling - Ankersmid Group based in Wilrijk, BELGIUM. from Ankersmid Sampling Product line

  • Axis - Industrial Type of Ethylene Oxide Scrubber Systems

    Axis Industrial Type of Ethylene Oxide Scrubber Systems have high scrubbing efficiency along low power and acid consumption. Ethylene oxide actively absorbed in the scrubber which converts ethylene-oxide into ethyleneglycols which uses in automotive ındustry as anti-freeze.

    By Kordon Tip ltd. based in Cigli, TURKEY.

  • Jupiter Scientific - Water Scrubbers

    Water scrubbers are often the most cost effective solution for applications in which the pollutant is soluble in water or in a solution composed of water with a chemical additive. Jupiter Scientific’s designers and applications engineers have extensive experience with the development of water scrubbers for an array of industrial ...

    By Jupiter Scientific based in Fremont, CALIFORNIA (USA).

  • MAXIM - Model AG - Acid Gas Scrubbers

    Colt's custom vertical spray towers and packed bed scrubbers can be designed for process exhaust volumes to over 100,000 acfm. A variety of arrangements and options are available to suit your specific process requirements. The factory assembled units are available in FRP, stainless steel and alloy construction.

    By Colt Technologies, Inc. based in Rockwall, TEXAS (USA).

  • IC Controls - Model 613 - pH Sensor for Oily Applications

    Expect 3 to 5 times longer pH sensor life even if the line fills with 100% hydrocarbon. At 100% hydrocarbon there is no pH reading, but as the % of hydrocarbon falls, the 613 recovers and reads pH!

    By IC Controls Ltd. based in Orangeville, ONTARIO (CANADA). from pH/ORP Product line

  • Chemical Injection/Feed Skids

    Specifications: Operating Pressures to 15,000. Operating Volumes to 500 gpm. Custom Engineered for a Variety of Applications, i.e. Oil/Gas Conditioning, Boiler Feed-Water, Cooling Tower Water, Produced Water Treatment, Scrubber Treatment, Demulsification, etc.. Available in a Broad Range of Materials.

    By Hudson Industries based in Vienna, OHIO (USA). from Process Equipment Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you