Only show results available in Virginia? Ok

gas warning sensor equipment

  • Premium

    Multitec 410 - Multiple Gas Warning Device

    The Multitec 410 is the latest addition to the Sewerin range of multiple gas warning devices. Unlike the Multitec 5xx devices, the Multitec 410 has a catalytic sensor, also known as a catalytic combustion sensor, for measuring flammable gases. This sensor is designed to react to almost all flammable gases. In order to gain maximum benefit from ...

    By Hermann Sewerin GmbH based in Gütersloh, GERMANY. from Multiple Gas Warning Device Product line

  • Premium

    Second Sight MS - Gas Detection camera

    Designed for early warning and real time visualization of dangerous gases, the Second Sight® MS is the perfect solution for critical area surveillance and protection against chemical threats (Chemical Warfare Agents, Toxic Industrial Compounds). The Second Sight® MS detects, identifies and visualizes a cloud of dangerous gas in real time ...

    By Bertin Instruments based in Montigny-le-Bretonneux, FRANCE. from Gas Detection camera Product line

  • Monicon - Model S500L - Gas Monitor

    The Monicon S500L Gas Monitor is a rugged, self contained, Intelligent gas sensor with, many advanced features to provide fast, realiable warnings of combustible gas concentrations at levels below at which these gases become potentially explosive. The S500L is certified ATEX EEx'd IIc T6 Ta -20ºC to +60ºC. The gas concentration is ...

    By Monicon Technology based in Galway, IRELAND. from Gas Monitor Product line

  • Calibration Kit

    MST’s 8003101 Calibration Kit is furnished with a non-adjustable regulator to ease the calibrating procedure. WARNING: To avoid damage to the monitor’s sensor, regulator provided in this kit must be used. Before attempting to use this kit, be certain that the components are connected as shown in the sketch below and read the section on ...

    By Modern Safety Techniques (MST) Inc. based in Hicksville, OHIO (USA). from Calibration Kit Product line

  • Ice Detection Sensors

    Working in sites exposed to icing can be extremely dangerous to working personnel if not warned in time. Ice can make steps and ladders slippery and make work situations at heights or emergency evacuation more dangerous than allowable. Wind turbines — in particular offshore, and offshore oil and gas platforms — in particular in arctic ...

    By Automasjon and Data AS based in Sandnes, NORWAY. from Ice Detection Sensors Product line

  • Monicon - Model IR80 - CO2 Monitoring Unit

    The Monicon IR80 is a high quality, self contained, NDIR (Non Dispersive Infra Red) gas sensor that offers a host of sophisticated features to provide fast, reliable warnings against exposure to dangerous concentrations of carbon dioxide.

    By Monicon Technology based in Galway, IRELAND. from CO2 Monitoring Unit Product line

  • Analox - Model AX60+ - Multi Gas Monitor (Oxygen Variant)

    The Analox Ax60+ multi-gas monitor... because plus is more. The Ax60+ is a wall-mountable multi gas monitor for detecting carbon dioxide with an option for monitoring oxygen available now. Based on the popular Ax60, the new Ax60+ multi gas monitor offers the functionality of being able to add modular sensors, creating a fully flexible solution. ...

    By Analox Sensor Technology based in Stokesley, UNITED KINGDOM. from Multi Gas Monitor (Oxygen Variant) Product line

  • TOX - Model 914 LON - Gas Transmitter

    The ADOS TOX 914 LON CO gas measurement sensor uses a method where the air to be measured is diffused into a chemical measuring cell. The H+ ions and electrons released at the electrode are consumed in a cathode reaction. The low of current between anode and cathode generated during this process is directly proportional to the CO concentration in ...

    By ADOS GmbH based in Aachen, GERMANY. from Gas Transmitter Product line

  • Dräger Pac - Model 7000 - Single Gas Detection Devices

    Safety in the workplace always takes top priority. The Dräger Pac 7000 provides a reliable warning against dangerous concentrations of 12 different gases depending on the sensor selection. Another unique option to the device is its five-year warranty for the H2S, O2 and CO versions.

    By Drägerwerk AG & Co. KGaA based in Lübeck, GERMANY. from Single Gas Detection Devices Product line

  • Draeger Safety - Model Pac 7000 - Personal gas detector

    Safety in the workplace always takes top priority. The Dräger Pac 7000 provides a reliable warning against dangerous concentrations of 12 different gases depending on the sensor selection. Another unique option to the device is its five-year warranty for the H2S, O2 and CO versions.

    By Drägerwerk AG & Co. KGaA based in Lübeck, GERMANY. from Personal gas detector Product line

  • Air Check - Model 99030 - Ammonia Monitor

    The Air Check Lite Smart Ammonia Monitor is ideally suited for protecting your personnel, products, and plant from the hazards of ammonia leaks. The Air Check Lite is sensitive to detect the smallest leaks to provide early warning of low-level ammonia concentrations that can destroy your produce and dairy products.PureAire’s proprietary ...

    By PureAire Monitoring Systems, Inc based in Lake Zurich, ILLINOIS (USA). from Ammonia Monitor Product line

  • The Monotox Master

    Using state of the art technology, the Monotox Master 5000 provides fast, accurate and reliable single channel gas monitoring. Able to use a wide range of gas sensors, the Monotox Master is perfect for all your area monitoring applications that require continuous monitoring but not the environmental protection of an explosion-proof enclosure. The ...

    By Air-Met Scientific Pty Ltd based in Nunawading, AUSTRALIA.

  • Model MWS 906 CP - Multi Channel Gas Warning System

    The multi-channel gas warning equipment MWS 906 CP continuously monitors the ambient air and issues an early warning of gases and vapours that are dangerous to health, or when there is a danger of explosion, for noncombustible gases and vapours. In conjunction with the ADOS TOX 592 CO gas measurement sensor, the MWS 906 CP satisfies all ...

    By ADOS GmbH based in Aachen, GERMANY. from Multi Channel Gas Warning System Product line

  • GDS - Model 202 - Flammable/Toxic/Regrigerant Gas Alarm

    Toxic/Flammable/Refrigerant sensor combination. Standard Unit 1 - 10 Sensors. Four zone indicators. Single cable for multiple sensors. Individual Sensors with audible and visual warning alarms. Sensors pre-set and tested. Self diagnostic. Pre and full alarm indication. Two alarm relays. Wall or panel mount. Designed for ease of installation. ...

    By GDS Technologies Ltd. based in West Yorkshire, UNITED KINGDOM. from Flammable/Toxic/Regrigerant Gas Alarm Product line

  • CMR - Model MP12 - Bearing Temperature Monitoring Sensor

    The MP12 bearing temperature monitoring sensor is designed for industrial diesel and gas engines. This sensor constantly monitors the main bearing, providing a clear warning in case of bearing seizure. The tip of the sensor is typically positioned onto the back of the bearing shell or might be very close to it. The PT100 element provides very good ...

    By CMR Group based in Leetsdale, PENNSYLVANIA (USA). from Bearing Temperature Monitoring Sensor Product line

  • Model R-4344 - Self-Contained Sample Draw System for Toxic Gas Monitoring

    The R-4344 sample draw system is designed to measure the level of toxic gases in confined spaces where the atmosphere is too hot, too wet or too dusty for traditional diffusion sensors. The R-4344 combines a state of the art gas monitor with a long-life DC brushless sample pump, stainless steel coalescing filter with optional automatic moisture ...

    By Ranger Analytics, Inc. based in Stafford, TEXAS (USA).

  • Sensit HCN

    Sensit HCN is and advanced state-of-the-art gas analyzer capable of measuring and warning of hazardous levels of hydrogen cyanide (HCN). This investigative style instrument allows fire fighters to analyze the environment in smoldering areas prior to overhaul operations. The powerful internal pump and cooling probe provide accurate readings in the ...

    By Sensit Technologies based in Valparaiso, INDIANA (USA).

  • Crowcon - Mill-Gard CO Detection System

    The Mill-Gard CO detection system provides early warning of a fire within coal pulversizers and silo’s. Designed specifically for use in coal-fired power stations, the system uses powerful pumps to extract air samples from the coal mill via hardened sample probes. The air samples are conditioned and passed over industrial grade C.O. (carbon ...

    By Crowcon Detection Instruments Ltd - a Halma company based in Milton Park, UNITED KINGDOM. from Mill-Gard CO Detection System Product line

  • FlexADOS - Model 914 LON - Measuring Control and Warning Unit for Sensors

    The FlexADOS 914 LON is a measuring, control and warning unit for gas sensors. It continuously monitors the ambient air and provides an early warning of harmful, explosive and non-flammable gases and vapours. Together with the TOX 914 LON® gas transmitters, FlexADOS 914 LON® fulfils VDI guideline 2053 from December 2014 and also EN ...

    By ADOS GmbH based in Aachen, GERMANY. from Measuring Control and Warning Unit for Sensors Product line

  • FlexADOS - Model 914 - Multi Channel Gas Sensor System

    The multi-channel gas detector system FlexADOS 914 continuously monitors the ambient air and provides an early warning of harmful, explosive and non-flammable gases and vapours. Together with the GTR 210 gas transmitter family, FlexADOS 914 fulfils EN 50271:2011, achieves safety integrity level SIL1 and can be used for primary explosion ...

    By ADOS GmbH based in Aachen, GERMANY. from Multi Channel Gas Sensor System Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you