Only show results in Massachusetts? Ok

gear pump equipment

  • Premium

    Hilliard - Dual Drive & Turning Gear

    Typical applications for dual-source drives are blowers, pumps and fans. For multi-speed drives, our overrunning clutches are ideal in such operations as conveyors and forming rolls.

    By Hilliard Corporation based in Elmira, NEW YORK (USA). from Industrial Clutches - Overrunning Clutches Product line

  • Colfax - Gear Pump

    Gear pumps, such as the Crescent Internal Gear (CIG) Pump by Imo, are fixed-displacement pumps used mainly in hydraulic power applications as well as other more specialized applications like aircraft fuel test stands. Gear pumps can be engineered with multiple stages for very high pressure or moderate pressure on very low viscosity fuels.

    By Colfax Corporation based in Annapolis Junction, MARYLAND (USA).

  • Johames - Model 2CY - GEAR PUMP

    Introduction:1. 2CY high pressure electric fuel pump double gear oil pump is simple and compact structure, easy operation.2. The electric fuel pump is mainly used for the delivery of the lubricating liquid without solid particles and fibers.3.The stainless steel gear pump can transfer the non-lubricating oil, drink and low corrosive liquid. And ...

  • Model ZK Blue Series - Gear Pumps

    A high performance pump customized to your needs; With our diverse standard and high performance gear pump range we are able to serve all your needs and respond to any challenge. Our gear pumps are robust, self-priming and are designed for your specific application. On demand, we can provide external gear pumps which API, ATEX, TR-CU 10, TR-CU 12 ...

    By ASM DIMATEC Deutschland GmbH based in Wolfsburg, GERMANY. from Gear Pumps Product line

  • Model KF 2.5...630 - Gear Pumps

    Gear pumps KF are used for pumping a wide variety of fluids. Gear pumps KF are distinguished especially by their wide range of variants which are assembled as required on the modular principle and also permit subsequent upgrade. The pumps are also suitable for media with low lubricating properties. The standard housing sections are of grey cast ...

    By KRACHT GmbH based in Werdohl, GERMANY. from Gear Pumps Product line

  • Gear Pumps

    Gear pumps are simple and economical pumps. These pumps create pressure through the meshing of the gear teeth, which forces fluid around the gears to pressurize the outlet side. For lubrication, the gear pump uses a small amount of oil from the pressurized side of the gears, bleeds this through the hydrodynamic bearings, and vents the same oil ...

    By Advanced Fluid Power, Inc. based in Theodore, ALABAMA (USA). from Hydraulic Pumps Product line

  • MAS GRUP - Model DP Series - Gear Pumps

    The pump consists of two telescopic gears. The system is so simple that the probability of breakdown is very low. The gears ensure that all pressure remains below the limit of the system. Since the gears normally regulate themselves it is not necessary to regulate the pressure at the discharge port of the pump by means of a valve. The pump is made ...

    By MAS GRUP based in Istanbul, TURKEY. from Product Groups Gear Pumps Product line

  • Pompe Cucchi - Model WP Series - Gear Pump

    Gear pump WP series has been created in order to solve transfer and dosage problems of non lubricant and low viscosity liquids.The construction of this series of gear pumps meets the regulations of the directive 2006/42CE and of the standards EN ISO 12100, EN 809, and has the certification GOST-R. Executions on request in accordance with Directive ...

    By Pompe Cucchi Srl based in Opera, ITALY. from Metering Pumps Product line

  • Pompe Cucchi - Model S SK SM - Gear Pumps

    Cucchi Pumps has designed this new range of gear pumps, machined from rolled bar with the intent to obtain high quality pump bodies free of cracks and/or casting defects together with a perfect surface finishing which is impossible to obtain with the traditional sand casting. This range construction is conformed to the standards CE 89/392, 91/368, ...

    By Pompe Cucchi Srl based in Opera, ITALY. from Transfer Pumps Product line

  • Model IN-INML - Gear Pumps

    Positive displacement gear pumps are used to pump thick and viscous fluids without suspended solids, at low and high temperature. Thanks to the volumetric effect of the gear, they are always self-priming with good suction characteristics; they have also a constant flow even if delivery pressure changes during operation. Internal fine tolerances ...

    By Pompe Garbarino S.p.A based in Acqui Terme (AL), ITALY. from Positive Displacement Pumps Product line

  • Pompe Cucchi - Model MX Series - Gear Pump

    Pompe Cucchi has realized this new gear pumps series obtained by dye casting in view of achieving pumps of a very high quality with a total absence of fusion defects and with perfect surface finishing not obtainable from the traditional fusion. The construction of this series is conformed with ATEX 24/9/CE - CE 89/392, 91/368, 93/44/68, 98/37 ...

    By Pompe Cucchi Srl based in Opera, ITALY. from Transfer Pumps Product line

  • Model BVP-Z - Gear Pump

    Powerful delivery pump with digital potentiometer for speed setting.

    By Ismatec SA - a unit of IDEX Corporation based in Wertheim, SWITZERLAND. from Gear Pumps Product line

  • Model KF 2.5... 200 - Gear Pumps

    Conventional sealing gaskets are pushed to their limits with different applications. Typical applications are found in polyurethane facilities, refrigerating machines and vacuum facilities. For these applications, you have the possibility to equip the KF 2.5 ...200 with a magnetic coupling. The magnetic coupling serves as a shaft seal and for the ...

    By KRACHT GmbH based in Werdohl, GERMANY. from Gear Pumps Product line

  • Roper - Model A Series - Gear Pump

    Direct Drive Motor Speed Pumps with Unmatched Versatility and Ruggedness.

    By Roper Pump Company based in Commerce, GEORGIA (US) (USA). from Gear Pumps Product line

  • LÖSI - Gear Pumps

    All sizes (group 0 - group 4), types LZP0, LZP1, LZP2, LZP3 und LZP4.Tandem and triple pumps available.Displacement 0,25 - 250 cm3/rev.All common designs and shafts.Support bearing available as accessory.

    By LÖSI Getriebe-Steuerungen Hydraulik GmbH based in Kaiserslautern, GERMANY. from Gear Pumps Product line

  • Roper - Model 2835 Series - Gear Pump

    When the going gets thick, this pump gets going. Count on it every time.

    By Roper Pump Company based in Commerce, GEORGIA (US) (USA). from Gear Pumps Product line

  • Hydrosila - Model GP1 10K - Gear Pump

    Series ‘К’ gear pumps are manufactured with thru-bolt body of rolled aluminium, usage of solid sleeves of high-strength aluminium alloy and PTFE bearings. Gear pumps series ‘К’ are manufactured under the standard DIN, SAE.

    By Trading House Hydrosila, JSC based in Kirovohrad, UKRAINE. from Gear Pumps Product line

  • Roper - Model AE Series - Gear Pump

    Smooth, quiet power in a remarkably compact footprint.

    By Roper Pump Company based in Commerce, GEORGIA (US) (USA). from Gear Pumps Product line

  • Micro PRO - Gear Pump

    Primary Application: Espresso/Coffee. Secondary Application: Industrial Applications. Additional Applications: Carbonatation, Espresso/Coffee, Welding, Cold Carb Circulation, Reverse Osmosis, Beer Chillers, Pesticide Systems, Solar Applications . Mounting Style: Integrated Pump & Motor

    By PROCON Products based in Smyrna, TENNESSEE (USA). from Gear Pump Product line

  • Model P1 - Gear Pumps

    High-efficiency hydraulic pump specifically designed for ultra-high pressure hydraulic systems, the former, the rear cover, the main use of advanced aluminum alloy die-casting are made of high density, robust appearance. Economy 6061T6 main high hardness, abrasion resistance, 8-shaped bearing sleeve has even adopted the A356T6 gravity casting, ...

    By Kuking Machine Manufacture Co.,Ltd based in ShangHai, CHINA. from Gear Pumps Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you