Gear Pump Equipment Available In Taiwan
-
Manufactured by KAZELbased in TURKEY
Inlet Pressure 0.7 ÷ 3 bar.Operating Viscosity Range -12:100 cSt.Fluid Temperature -10°C ...
-
Manufactured by LöSi GmbHbased in GERMANY
The gear pumps are designed for transforming the mechanical energy as energy of the working liquid (pressure and flow rate). They are simplified in construction and they have a relatively low cost. All these benefits ensure their wide application in the hydraulic ...
-
Manufactured by Curflobased in USA
The Gear Pump Series design was created in an effort to make replacement pumps easily accessible. One of CURFLO’s more recent products, the Gear Pump was created for… Based on 101888 & 10198 pumps, the Gear Pump has a helical ...
-
Manufactured by Roper Pump Companybased in USA
Legendary “3600” Series pump design with enhanced seal & assembly ...
-
Manufactured by Trading House Hydrosila, JSCbased in UKRAINE
Displacement - 34...100 cm3.Rated pressure - 18-28 MPa (180-280 bar).Max. rotational speed - 1800-2800 rpm.SeriesT gear pumps are manufactured with installation dimensions according to ISO standard. May be of right, left and bidirectional rotation.The main characteristic of these pumps is low sensitivity to axial and radial loads which ...
-
Manufactured by MAS DAF MAKINA SAN. A.S.based in TURKEY
The pump consists of two telescopic gears. The system is so simple that the probability of breakdown is very low. The gears ensure that all pressure remains below the limit of the system. Since the gears normally regulate themselves it is not necessary to regulate the pressure at the discharge port of the pump by ...
-
Manufactured by Roper Pump Companybased in USA
With its magnetic power and leak-proof performance, the V Series will protect your ...
-
Manufactured by Roper Pump Companybased in USA
When the going gets thick, this pump gets going. Count on it every ...
-
Manufactured by MAS DAF MAKINA SAN. A.S.based in TURKEY
Design: “Gear-within a gear” principle has only two moving parts. It is the secret of dependable, efficient operation of all positive displacement gear pumps. Liquids to be pumped by the gear pump must be clean rather than liquids to be pump by the ...
-
Manufactured by Pompe Cucchi Srlbased in ITALY
Gear pump WP series has been created in order to solve transfer and dosage problems of non lubricant and low viscosity liquids.The construction of this series of gear pumps meets the regulations of the directive 2006/42CE and of the standards EN ISO 12100, EN 809, and has the certification GOST-R. Executions on request in ...
-
Manufactured by KAZELbased in TURKEY
CATEGORY 1600 SERIES SERIES 1600 SERISI COVER TYPE SAE ...
-
Manufactured by Bezares SAbased in SPAIN
Gear pump with reversible Rotation direction and internal drainage. Rear and side ...
-
Manufactured by Pompe Cucchi Srlbased in ITALY
Cucchi Pumps has designed this new range of gear pumps, machined from rolled bar with the intent to obtain high quality pump bodies free of cracks and/or casting defects together with a perfect surface finishing which is impossible to obtain with the traditional sand casting. This range construction is conformed to the standards ...
-
Manufactured by Speck Pumpen Walter Speck GmbH & Co. KGbased in GERMANY
Externally splined displacement pump. Media Oil / fuels -20 – +80 °C. Motor 120 W, 1~Mot / 3~Mot / EC. Material design. Stainless steel. Suction connection G 1/8. Pressure connection G 1/8. Sealing Separating can / Magnetic drive. Dimensions (WHD) 106 x 145 x 255–264 mm ...
-
Manufactured by Zuwa - Zumpe GmbHbased in GERMANY
Gear Pumps to convey lubrication or oils with various viscosities. Gear pumps work according to the displacement method. ...
-
Manufactured by Zhejiang Jushi Pump Co.,Ltdbased in CHINA
Zhejiang Jushi Pump Co.,Ltd manufacture 2CY high pressure electric fuel pump double gear oil pump is simple and compactstructure, easy operation. The electric fuel pump is mainly usedfor the delivery of the lubricating liquid without solid particles and fibers. The stainless steel gear ...
-
Manufactured by Roper Pump Companybased in USA
Direct Drive Motor Speed Pumps with Unmatched Versatility and ...
-
Manufactured by Roper Pump Companybased in USA
Compact, Versatile, High Pressure Gear Pumps. Precision Machining Allows for Minimum Clearances, Providing Efficient, Trouble-Free ...
-
Manufactured by Pompe Garbarino S.p.Abased in ITALY
Positive displacement gear pumps are used to pump thick and viscous fluids without suspended solids, at low and high temperature. Thanks to the volumetric effect of the gear, they are always self-priming with good suction characteristics; they have also a constant flow even if delivery pressure changes during operation. Internal ...
-
Manufactured by Fluid Tech Systemsbased in INDIA
Fluid Tech Systems offer “ROTOFLUID” brand gear pump Model “FTGM” (Bronze Gear Pump, Gunmetal Gear Pump, Colour Gear Pump, Paint Transfer Gear Pump, Textile Machine Gear ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you