Only show results available in Connecticut? Ok

geomembrane production equipment

  • Junsheng - Model JS-TGM - Plastic Geomembrane Net Production Line Machine

    Junsheng geomembrane production line can produce the plastic geomembrane with thickness from 0.3 to 5mm and width of 4000 to 8000mm, the geomembrane can be monolayer, multilayer, both side smooth or embossing surface and laminated with non-woven fabric, the thickness of the geomembrane is uniform. It ' s widely used in waterproofing field in ...

    By Jiaxing Junsheng Machinery Co., Ltd. based in Qixing, Jiaxing City, CHINA. from Geomembrane/Net Machine Product line

  • OSO - HDPE Smooth Geomembranes

    OSO HDPE smooth geomembranes are the preferred products for lining projects requiring low permeability, exceptional chemical and ultraviolet resistance properties, which makes them extremely cost-effective for many applications

    By Osoplas based in Jinan, CHINA. from Geomembrane Product line

  • Solmax - White Reflective PE Geomembrane

    Solmax’s White Reflective Prime Finish is a thin white polyethylene layer that is coextruded within any typical 3 layer Solmax geomembrane. The product’s core and bottom layer (≈97% of thickness), are made of the same raw materials and additives as traditional black geomembranes. By modifying the top layer (≈3% of ...

    By Solmax based in Varennes, QUEBEC (CANADA). from PE Geomembrane Finishes Product line

  • LLDPE - Linear Low Density Polyethylene - Textured

    If you require increased frictional performance, flexibility and elongation, Linear Low Density Polyethylene (LLDPE) - Textured Geomembranes are the best product choice. Its superior textured surface allows for increased friction between the two layers and the design of steeper slopes.

    By Environmental Protection, Inc. (EPI) based in Traverse City, MICHIGAN (USA).

  • OSO - Model CG Series - Composite Geomembrane

    OSO Composite Geomembrane is a combination of geotextile and geomembrane. The product provides the advantages of both geomembranes and geotextiles. And, the geotextile layer increases essential tensile strength and enhances tear and puncture resistance.

    By Osoplas based in Jinan, CHINA. from Other Products Product line

  • Roofiran - Geomembranes

    Resistance to -10 and +97 degreesResistant to algae growthHigh strainResistible to chemical reactionsAnd ...Geomembranes are made from relatively thin continuous polymeric sheets, but they can also be made from the impregnation of geotextiles with asphalt, elastomer or Polymer sprays, or as multilayered bitumen geocomposites. In this discussion, ...

    By Roofiran Mashhad Branch based in Mashhad, IRAN.

  • Solmax - Extrusion Rod

    Geomembrane field installation is performed by certified technicians and constitutes a crucial step in ensuring optimal system performance. Since geomembranes cover large surface areas, several rolls are required on site. Therefore, rolls need to be assembled together using special equipment such as hot wedge and extrusion welding machines, the ...

    By Solmax based in Varennes, QUEBEC (CANADA). from PE Geomembrane Complementary Products Product line

  • Model LLDPE - Textured Geomembranes

    If you require increased frictional performance, flexibility and elongation, Textured LLDPE geomembranes are the best product choice.

    By Western Tank and Lining Ltd. (WTL) based in Delta, BRITISH COLUMBIA (CANADA). from Geomembranes Product line

  • Model FM/FMF - Membrane Based Composites

    Geomembranes generally serve a singular purpose, to act as a barrier to liquids and gasses, as such geomembranes are generally impermeable (10-10 m/s). Geomembranes are used in applications where it is necessary to prevent the loss of water or toxic materials. Extruded geomembranes are manufactured using relatively basic manufacturing processes, ...

    By GEOfabrics Limited based in Stourton, UNITED KINGDOM. from Geocomposites Product line

  • Western Tank & Lining HDPE Geomembranes

    Western Tank & Lining HDPE geomembranes are the preferred products for lining projects requiring low permeability, exceptional chemical and ultraviolet resistance properties.

    By Western Tank and Lining Ltd. (WTL) based in Delta, BRITISH COLUMBIA (CANADA). from Geomembranes Product line

  • Firestone - Geomembrane

    Firestone Specialty Products’ geomembranes are the durable, dependable solution for nearly any application. Whether for decorative commercial water features or critical containment applications such as agriculture, aquaculture, mining and other water containment, Firestone’s geomembrane systems are easy to install and built to ...

    By Firestone Geosynthetic Membranes based in Indianapolis, INDIANA (USA).

  • Geocomposite

    Geocomposites were originally designed to replace a sand or gravel drainage layer. Geocomposite is made by laminating a nonwoven geotextile to either one or both sides of a geonet. The textile is designed to filter out particles to prevent the geonet from clogging. Commonly the Geocomposite is installed either above or below a geomembrane. In a ...

    By Clean Air And Water Systems, LLC (CAAWS) based in Dousman, WISCONSIN (USA). from Drainage Materials Product line

  • Non-Woven Geotextiles

    Geocomposites were originally designed to replace a sand or gravel drainage layer. Geocomposite is made by laminating a nonwoven geotextile to either one or both sides of a geonet. The textile is designed to filter out particles to prevent the geonet from clogging. Commonly the Geocomposite is installed either above or below a geomembrane. In a ...

    By Clean Air And Water Systems, LLC (CAAWS) based in Dousman, WISCONSIN (USA). from Geotextiles Product line

  • Nilex - High Density Polyethylene (HDPE) Geomembrane

    High Density Polyethylene (HDPE) geomembrane liners are used in a wide range of containment applications. Available in smooth, textured, white, conductive and high temperature variations, this material provides excellent durability and chemical resistance properties and is reliable in exposed applications, offering great ultraviolet ...

    By Nilex based in Edmonton, ALBERTA (CANADA).

  • Daiyang - Model EVA - Geomembrane

    Geomembrane liners are smooth spark-testable HDPE, LDPE, LLDPE, EVA geomembranes that contain an integrated, specially formulated conductive layer on the bottom surface of the geomembrane. Conductive geomembrane liners can be easily tested for post-installation damage using equipment capable of performing spark testing in the field.DAIYANG ...

    By Shandong Daiyang Composite Co., Ltd based in Tai’an city, CHINA. from Geomembrane Product line

  • 0.75mm smooth HDPE(HDS075) geomembranes

    Sinotech HDS 075technical data (ASTM test method) 1. Thichness: 0.75mm 2. Density: 0.94 g/cc 3. Tear resistance: 111N 4. Puncture Resistance: 311N 5. Stress Crack Resistance: 300 hours 6. Carbon Black Content: 2-3% 7. Oxidative Induction Time(OIT) Standard OIT: 100 minutes 8. Oven Aging at 85 degree Degree Celsius Standard OIT, retained after 90 ...

    By Qingdao Kropfmuehl Graphite Co.,Ltd. based in Laoshan District, Qingdao, CHINA.

  • 1.5mm smooth HDPE geomembranes

    Sinotech HDS 150 technical data (ASTM test method) 1. Thichness: 1.5 mm2. Density: 0.94 g/cc3. Tear resistance: 222N4. Puncture Resistance: 534N5. Stress Crack Resistance: 300 hours6. Carbon Black Content: 2-3%7. Oxidative Induction Time(OIT)Standard OIT: 100 minutes8. Oven Aging at 85 degree Degree Celsius Standard OIT, retained after 90 days: ...

    By Qingdao Kropfmuehl Graphite Co.,Ltd. based in Laoshan District, Qingdao, CHINA.

  • 1.0mm smooth HDPE(HDS100) geomembranes

    Sinotech HDS 100 technical data (ASTM test method) 1. Thichness: 1.0mm2. Density: 0.94 g/cc3. Tear resistance: 156N4. Puncture Resistance: 400N5. Stress Crack Resistance: 300 hours6. Carbon Black Content: 2-3%7. Oxidative Induction Time(OIT)Standard OIT: 100 minutes8. Oven Aging at 85 degree Degree Celsius Standard OIT, retained after 90 days: ...

    By Qingdao Kropfmuehl Graphite Co.,Ltd. based in Laoshan District, Qingdao, CHINA.

  • 1.5mm textured HDPE(HDT150) geomembranes

    Sinotech HDT 150 technical data (ASTM test method) 1. Thichness: 1.5mm 2. Density: 0.94 g/cc 3. Tear resistance: 200N 4. Puncture Resistance: 400N 5. Stress Crack Resistance: 300 hours 6. Carbon Black Content: 2-3% 7. Oxidative Induction Time(OIT) Standard OIT: 100 minutes 8. Oven Aging at 85 degree Degree Celsius Standard OIT, retained after 90 ...

    By Qingdao Kropfmuehl Graphite Co.,Ltd. based in Laoshan District, Qingdao, CHINA.

  • Geomembranes

    The geomembranes are flat polymer products in form of foils with very low permeability that are used for sealing (waterproofing) in contact with soils or other materials. The quality assurance of the gemembrane begins by choosing the synthetic resin. High quality polyethylene is manufactured to meet the extreme exigencies imposed to the ...

    By S.C. Iridex Group Plastic S.R.L based in Voluntari, ROMANIA. from Geosynthetic Materials Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you