Showing results for: Geophysics Services Equipment Available In Asia & Middle East
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
2AUSS-07A systems are manufactured by Advanced Geophysical Operations and Services Inc. and are designed for carrying out shallow marine EM surveys at depths of up to 100 meters. These systems are based on the use of high-precision and highly-sensitivity geophysical equipment for the EM surveys manufactured by Phoenix Geophysics ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
5AUSS-07A systems are manufactured by Advanced Geophysical Operations and Services Inc. and are designed for carrying out marine EM surveys at the depths of up to 100 meters. These systems are based on the use of high-precision and high-sensitivity geophysical equipment for EM surveys manufactured by Phoenix Geophysics Ltd. The ...
-
Manufactured by Crystal Globe Geophysical Research & Service, LLCbased in USA
Node-MAG data acquisition units accept analogue inputs from flux-gate sensors and convert to digital, 32-bit data acquisition is designed for simultaneous collection and analysis of magnetic field in three axes, suitable for field environment. ...
-
Manufactured by Crystal Globe Geophysical Research & Service, LLCbased in USA
EREV-I+ is a new generation proton magnetometer developed and manufactured by Crystal Globe. It uses the latest technologies to achieve low noise and high precision data acquisition. It offers many flexible and advanced features not available in older products. It is used in many applications, such as magnetic field mapping, magnetic basement and structure detection, engineering and environmental ...
-
Manufactured by Crystal Globe Geophysical Research & Service, LLCbased in USA
OSO-N is a new generation node seismic acquisition unit, it adopt high precision time synchronization, continuous time series collection, and has different configuration for selection. Each unit has functions such as GPS synchronization, high capacity SD card for data storage, system status monitoring. It can be used in engineering exploration, natural earthquake monitoring, passive source ...
-
Manufactured by Crystal Globe Geophysical Research & Service, LLCbased in USA
The AI system, a new series of Geophysical exploration distributed system specifically designed for exploration and geophysical monitoring. This system is derived from the Aether and AirE system, sharing the technology. With a set of input protocols, AI system contains a variety of modules for different methods. More type sensors and ...
-
Manufactured by Crystal Globe Geophysical Research & Service, LLCbased in USA
SuperTX is a transmitting system which support various kinds of active electrical method and EM method. It has features of ultrahigh power density, modular design, supporting full power output and so on. The regular model support a max output power of 20KW with 1000V voltage and 20A current. The highest output power we can custom-made is 80KW, the voltage will be 2000V and the current will be ...
-
Manufactured by Crystal Globe Geophysical Research & Service, LLCbased in USA
A new generation electromagnetic 3D system,A-Link, all-new glass design, makes exploration more efficient, precise, less expensive,distributed system specifically designed for exploration, mineral mining, shallow oil and gas, as well as groundwater exploration. A-Link is a multiple simultaneous channels, distributed designed for high resolution, time-lapse monitor. It's an electromagnetic ...
-
Manufactured by Crystal Globe Geophysical Research & Service, LLCbased in USA
Aether is a new generation multi-functional acquisition system developed by Crystal Globe and Beijing Orangelamp (China) with latest technologies, featuring high precision, low noise, low power consumption, flexible channel configuration, and remote accessibility. It is the only product in the market capable of acquiring both low and high frequency full time series data simultaneously. It has ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
Geoelectric transmitter «ASTRA» is designed to create electromagnetic field during geophysical surveys by means of direct current resistivity, induced polarization, frequency-domain (using separate component or impedance measurements) and other electromagnetic methods. The transmitter can be applied to solve only civil tasks, ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
RMT-F equipment is intended for radiomagnetotelluric soundings using electromagnetic fields of remote radio transmitters. On data of measurements of horizontal and mutually-orthogonal component of electrical and magnetic fields curves of apparent resistivity and impedance phase are calculated, which are used for inversion and plotting of geoelectric cross section. ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
AGCOS’s acquisition unit GEPARD-8A is based on the world’s latest computer, electronics and communication technologies, and is used for accurate and sensitive registration of electric and magnetic fields at wide frequency range. This system is multifunctional and can be effectively used for many electromagnetic geophysical ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
and install the sensor in less than 5 minutes on any soil in different climates and weather conditions. Model TRI-1/50 is used with magnetic sensor MTC-50 from Phoenix Geophysics Limited, but can be easily redesigned for virtually any induction coil upon ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
and install the sensor in less than 5 minutes on any soil in different climates and weather conditions. Model TRI-1/30 is used with magnetic sensor MTC-30 from Phoenix Geophysics Limited, but can be easily redesigned for virtually any induction coil upon ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
Technical Characteristics: Frequency range, kHz: 10-1000. Transfer constant, mV/nT: 25. Dimensions and weight, not more than: 40 mm (diameter), 240 mm (length), 0.5 Kg (weight). Voltage of external power supply, V: +/- 8. Current consumption, mA: 30. Cable length, m, not more than: ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
All-in-One multifunction geophysical EM receiver GEPARD-8 is intended for sensitive and accurate registration of electrical and magnetic fields in wide frequency range, both in natural source and control source modes and wide exploration depth intervals. System works with variety of sensors, including grounded and non-grounded electric lines, ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
The ACF-4M equipment is intended for carrying out audiomagnetotelluric and frequency soundings using natural and controlled sources electromagnetic ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
GEPARD-4A geophysical EM receiver is based on the world’s latest computer, electronics and communication technologies, and is used for accurate and sensitive registration of electric and magnetic fields at wide frequency range. This system is multifunctional and can be effectively used for many electromagnetic geophysical ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
Quality of field data received during acquisition using MT methods significantly depends on how accurately magnetic sensors are aligned with axis of coordinates. This is especially important for vertical component Hz, since in many instances it is considerably weaker than horizontal components of magnetic field. Small mistakes in sensor positioning might severely damage data or even make it ...
-
Manufactured by Advanced Geophysical Operations and Services Inc. (AGCOS)based in CANADA
SMMT receivers are designed for carrying out shallow marine EM surveys in transition zones at depths of up to 50m. They are based on high-precision and highly-sensitive land geophysical equipment for electroprospecting surveys and are built in such a way, that equipment can easily be used for land surveys or for simultaneous marine and land ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you