We couldn't find any geotechnical equipment suppliers or service providers located in Brunei Darussalam
Here is a list of equipment results with suppliers serving Brunei Darussalam
Geotechnical Equipment Available In Brunei Darussalam
-
PremiumManufactured by AMS, Inc.based in USA
Direct push can be a cost-effective, time saving, and a technically accurate means of drilling, sample collection, and testing. Split-Spoon and Shelby Tube samplers are popular options for geotechnical testing and sampling. This drilling method has been used for over 10 years and, according to the EPA in 2003, is accepted in all 50 states for ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
Temperature measurement chains are often used in ground freezing to control the expansion and integrity of the artificially frozen ground body. Temperature measurement chains are also suitable for applications in groundwater and permafrost. The TMK-2 digital temperature chain is a high-precision temperature measurement system designed for small diameter boreholes. Each temperature sensor has its ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
We mostly use pressurised water-tight encapsulated PT1000 sensors for temperature measurement in the ground, rock or on the ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The Piezopress system (PZP) consists of individual PVC piezometer tubes with removable pressure sensors. With the tight sensor seat above the filter tip, a closed cell is created at measurement interval depth. Thus, the pore water pressure can be monitores even in low permeability rocks and soils. The Piezopress is a low-cost pore water pressure measurement system for boreholes from a diameter of ...
-
Manufactured by Nexus Buildcon Solutionsbased in INDIA
ECA makes roads durable because of its water absorption ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
Displacement measurements along measurement lines (boreholes) provide information about the deformation behaviour of the rock or structure as well as about the interaction between the structure and the ground. With the sliding micrometer, displacement and deformation profiles in soil, rock and structures are precisely recorded metre by metre along arbitrarily aligned measuring lines. The ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The FIM is used for continuous measurement of borehole axial deformations. Similar to the sliding micrometer and the Trivec, the FIM is based on the cone-sphere setting principle. Probe lengths from 1 to 5 m are available. In boreholes with measuring tubes for Sliding Deformeter, Sliding Micrometer or Trivec, sections can be equipped with FIM(s) for continuous measurements. The FIM is fixed in ...
-
Manufactured by Groupe Fordia Inc.based in CANADA
The Versadrill GT8 is a multi-functional geotechnical drill rig that packs the punch of a full size rig. With its sturdy design, the GT8 meets the needs of the most demanding ...
-
Manufactured by Groupe Fordia Inc.based in CANADA
Light and portable, the EXPLO 220 geotechnical drill rig is perfect for seismic exploration and low depth geotechnical activities, for rotary drilling, coring, augering and down-the-hole hammering. Designed for quick break-down and assembly (in around 10 minutes), it can be mounted on a road trailer or on a four-wheel drive vehicle to ...
-
PremiumManufactured by AMS, Inc.based in USA
Evaluate the consistency, compaction and bearing of fine grained, soft soils. The static cone penetrometer is used to evaluate the consistency of soils, their level of compaction and the bearing capacity of shallow foundations and pavement subgrades. Specifically developed for use in fine grained soils, particularly soft soils, to depths of 30'. They use a 60 degree vertex angled cone with an ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
Stainless steel measuring tube, brass telescopic coupling with high precision conical measuring stop. Option: water pressure-tight measuring tubes (double O-ring sealing) and foil wrapping to prevent longitudinal stiffening. Used for high-precision, axial and radial displacement measurement along vertical measuring lines in swelling rock ("Gipskeuper", anhydrite). ...
-
PremiumManufactured by AMS, Inc.based in USA
The most widely accepted, portable method for evaluating strength and density of soil, in situ. The dynamic cone penetrometer uses a 15 lb. (6.8 kg) drive mass falling 20 in. (50.8 cm) that strikes the anvil to cause penetration of 1.5 in (3.8 cm) diameter cone (45 degree vertex angle) that has been seated in the bottom of a pre-augered hole. The blows required to drive the embedded cone a depth ...
-
Manufactured by Feritech Global Ltdbased in UNITED KINGDOM
The Feritech FT352 multimode winch has both lifting and constant tension (CT) modes. The system can be swapped over by the press of a button. This winch is designed for geotechnical work but as it has a hollow shaft, it can be installed with slip rings and used for geophysical projects as well. This medium speed geotechnical winch achieves ...
-
based in USA
This unit is capable of geotechnical augering and coring. It is complete with auto hammer, three winches, hydraulic powered Bean 35 water pump, and Moyno mud pump. This machine has 5100-ft. lbs. of torque. It can be track, skid, or truck ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
With the Reverse Head Extensometer, deformations can be continuously observed during excavation in front of the tunnel face or during the removal of slopes or the excavation of excavation pits. The modular design based on a chain of single extensometers provides a large number of measuring points in small diameter boreholes. The big advantage compared to other extrusion measuring systems is the ...
-
Manufactured by Dando Drilling International Ltd,based in UNITED KINGDOM
The Dando MK 1000 is fitted with a twin worm and single wheel gear totally enclosed in an oil bath case. This power swivel incorporates a 150mm I.D hollow spindle which is mounted on taper roller bearings and is powered by twin piston motors providing controlled rotation and torque in forward and ...
-
based in USA
This unit is capable of geotechnical augering and coring. It is complete with auto hammer, three winches, hydraulic powered Bean 35 water pump, and Moyno mud pump. This machine has 6600-ft. lbs. of ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS infiltration rings are a simple and relatively inexpensive method for monitoring infiltration rates. They can also be used to study liquid waste disposal, leaching and drainage efficiencies. The rings are centered by the cross handle – which is welded in place at the top of the unit. The rings are inserted into the turf by pushing and twisting on this cross handle. An optional dead blow ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The portable distometer is mainly used in tunnel construction for very precise convergence measurements. An invar steel wire is clamped between measuring bolts with the distometer with a defined force and the change in length compared to previous measurements is determined. The measuring accuracy is +/-0.05 mm + 1*10E-6 x the distance. The measuring range is 100 ...
-
Manufactured by Geomachine Oybased in FINLAND
GM85 is a versatile option for all moderately difficult geotechnical investigation and exploration work. Having more power, it can work faster and go deeper than the smaller options in our range. Available with both a direct cylinder and chain cylinder boom, GM85 can also be equipped with an optional rotary head for core sampling in rock. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you