Geotechnical Equipment
-
PremiumManufactured by AMS, Inc.based in USA
Direct push can be a cost-effective, time saving, and a technically accurate means of drilling, sample collection, and testing. Split-Spoon and Shelby Tube samplers are popular options for geotechnical testing and sampling. This drilling method has been used for over 10 years and, according to the EPA in 2003, is accepted in all 50 states for ...
-
ShowcaseManufactured by Solexperts AGbased in SWITZERLAND
The digital inclinometer probe is used for section-by-section displacement measurements radial to the axis of the measuring tube. The probe has a base length of 0.5 or 1.0 m. The vertical inclinometer is used in vertical boreholes and the horizontal inclinometer in horizontal boreholes. These probes can be integrated into the system of displacement measurement along lines (combination with ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The pressure sensor with data logger SDL for piezometers is a compact system for automatic detection of water levels. Its design and shape allow it to be installed directly in a 2'' (or larger) ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The FIM is used for continuous measurement of borehole axial deformations. Similar to the sliding micrometer and the Trivec, the FIM is based on the cone-sphere setting principle. Probe lengths from 1 to 5 m are available. In boreholes with measuring tubes for Sliding Deformeter, Sliding Micrometer or Trivec, sections can be equipped with FIM(s) for continuous measurements. The FIM is fixed in ...
-
Distributed by GaiaComm Ltd.based in GREECE
Every geotechnical design is to some extent hypothetical, and every construction job involving earth or rock runs the risk of encountering surprises. These circumstances are the inevitable result of working with materials created by nature, often before the advent of human beings, by processes seldom resulting in uniform conditions. The ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The sliding deformeter measuring line is formed by the measuring tubes installed in the ground, rock or structure. The measuring tubes consist of telescopic couplings made from ABS and HPVC connecting tubes. The connection between the telescopic coupling and the measuring tube can optionally be made water ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
We mostly use pressurised water-tight encapsulated PT1000 sensors for temperature measurement in the ground, rock or on the ...
-
Manufactured by Nexus Buildcon Solutionsbased in INDIA
ECA makes roads durable because of its water absorption ...
-
Manufactured by Hortus s.r.l.based in ITALY
distributed Wireless Sensor Network, equipment and GPRS data transmission reliability, quality and accuracy of geotechnical and weather ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
The inclinometer measuring line is formed by the measuring tubes installed in ground, rock or structure. Standard connecting tubes made of HPVC with internal grooves are available for guiding a borehole inclinometer measuring probe. The connection between the individual measuring tubes can optionally be designed with a telescopic ...
-
Manufactured by Groupe Fordia Inc.based in CANADA
The Versadrill GT8 is a multi-functional geotechnical drill rig that packs the punch of a full size rig. With its sturdy design, the GT8 meets the needs of the most demanding ...
-
Manufactured by Groupe Fordia Inc.based in CANADA
Light and portable, the EXPLO 220 geotechnical drill rig is perfect for seismic exploration and low depth geotechnical activities, for rotary drilling, coring, augering and down-the-hole hammering. Designed for quick break-down and assembly (in around 10 minutes), it can be mounted on a road trailer or on a four-wheel drive vehicle to ...
-
based in AUSTRALIA
Advanced design and technology plus 25 years of geotechnical expertise have produced the dataTaker DT85GW GeoLogger – A versatile, powerful – yet low power & cost effective data logger. It support vibrating wire and other geotechnical sensors such as Slope Indicator, RST Instruments, Geokon, Soil Instruments, Roctest, AGI ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
For measuring axial deformations and displacements in boreholes - the Modular Extensometer is a technical advancement of our proven Uni-Rod Extensometer. Electrical displacement transducers are used for automatic measurement. For manual measurement, a mechanical meter, a digital caliper or a portable electronic sensor with a digital reading device can be ...
-
PremiumManufactured by Solexperts AGbased in SWITZERLAND
With the Reverse Head Extensometer, deformations can be continuously observed during excavation in front of the tunnel face or during the removal of slopes or the excavation of excavation pits. The modular design based on a chain of single extensometers provides a large number of measuring points in small diameter boreholes. The big advantage compared to other extrusion measuring systems is the ...
-
based in AUSTRALIA
Advanced design and technology plus 25 years of geotechnical expertise have produced the dataTaker DT80GW GeoLogger – A versatile, powerful - yet low power & cost effective data logger. It support vibrating wire and other geotechnical sensors such as Slope Indicator, RST Instruments, Geokon, Soil Instruments, Roctest, AGI - ...
-
based in AUSTRALIA
DataTaker DT85G is a high end loggers which supports vibrating wire and other Geotechnical sensors. This logger is capable to read up to 960 Vibrating Wire sensors (when using 16x CEM20) and offers the same support on analog and digital channels. DT85G provides a low cost option for connecting massive number of sensors since each ...
-
based in AUSTRALIA
DataTaker DT80G is standard logger which supports vibrating wire and other Geotechnical sensors. This logger is suitable to be used in Geotechnical application such as slope stability, subsidence, dam wall monitoring, tunnel and mining excavation, ground water, tunnel wall monitoring, and site assessment. DT80G can read up to 300 Vibrating ...
-
based in AUSTRALIA
Advanced design and technology plus 25 years of geotechnical expertise have produced the dataTaker DT85GM GeoLogger – A versatile, powerful – yet low power & cost effective data logger. It support vibrating wire and other geotechnical sensors such as Slope Indicator, RST Instruments, Geokon, Soil Instruments, Roctest, AGI ...
-
PremiumManufactured by AMS, Inc.based in USA
The most widely accepted, portable method for evaluating strength and density of soil, in situ. The dynamic cone penetrometer uses a 15 lb. (6.8 kg) drive mass falling 20 in. (50.8 cm) that strikes the anvil to cause penetration of 1.5 in (3.8 cm) diameter cone (45 degree vertex angle) that has been seated in the bottom of a pre-augered hole. The blows required to drive the embedded cone a depth ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you