Geotechnical Test Equipment
-
PremiumManufactured by AMS, Inc.based in USA
Direct push can be a cost-effective, time saving, and a technically accurate means of drilling, sample collection, and testing. Split-Spoon and Shelby Tube samplers are popular options for geotechnical testing and sampling. This drilling method has been used for over 10 years and, according to the EPA in 2003, is accepted in all 50 states for ...
-
PremiumManufactured by AMS, Inc.based in USA
Dual Mass DCP Hard Cone ...
-
PremiumManufactured by AMS, Inc.based in USA
; has been modified to get a higher degree of reliability as far as correlation curves are concerned, obtaining the new SonReb method. To develop new curves, 50 cubic samples (200x200mm) of twenty distinct classes of concrete have been ...
-
PremiumManufactured by AMS, Inc.based in USA
Geotester dial penetrometer set is used for on-site measurement of soil compaction by testing the foundation plane or boring samples. It gives readings of estimated unconfined compressive strength in TSF or kg/cm2 when used with the standard 1/4' dia plunger. The geotester is furnished with stainless steel plungers, carrying case, data ...
-
PremiumManufactured by AMS, Inc.based in USA
The penetrologger has been especially developed to measure the resistance to penetration of the soil and to save the measuring results to digitally process them on a computer. The penetrologger is ergonomically designed, and lightweight. It can be used to measure to a depth of 80 cm. The penetrologger can provide the Unified Soil Classification System (USCS), the Vehicle Cone Index (VCI), and ...
-
PremiumManufactured by AMS, Inc.based in USA
Pask Permeameter Kit; The field saturated hydraulic conductivity (Kfs) or permeability of natural soil and built up beds of fill can be quickly and easily measured in place using the ETC Pask Constant Head Permeameter Kit manufactured by Dynamic Monitors, a business unit of Engineering Technologies Canada Ltd. ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS infiltration rings are a simple and relatively inexpensive method for monitoring infiltration rates. They can also be used to study liquid waste disposal, leaching and drainage efficiencies. The rings are centered by the cross handle – which is welded in place at the top of the unit. The rings are inserted into the turf by pushing and twisting on this cross handle. An optional dead blow ...
-
Manufactured by C-Tech Laboratory Equipment Co.,ltdbased in CHINA
DMT determines in a quick, precise, simple and economical way various important parameters used in geotechnical design. The results are highly repeatable and independent of the operator. The DMT is used in 50 countries. It is standardized in the ASTM (USA) norms, in the Eurocode and CEN ISO/TS 22476-11:2005. The field of application of the ...
-
PremiumManufactured by AMS, Inc.based in USA
Reliability and careful selection of components, the distinctive ergonomic and functional design, as well as the continuous scientific research in collaboration with the most important Universities in Italy, has brought to the development of this series of instruments of the latest generation. The N type sclerometer – Novatest design – has been modified to get a higher degree of ...
-
PremiumManufactured by AMS, Inc.based in USA
Developed by the Army Corps of Engineers, Dynamic Cone Penetrometers (DCPs) provide a low-cost, efficient test method for quickly determining in-situ CBR values of pavement base, subbase and subgrades. They can readily be used for depths up to 30" and up to 6' with optional drive rods and extensions. This model complies with ASTM ...
-
PremiumManufactured by AMS, Inc.based in USA
to the desired test depth and apply the shearing torque. To correct for the skin friction of the extension rods, a dummy probe replaces the vane and a skin friction test is performed adjacent to the vane test location. Includes: Torque head assembly, six (6) extensions rods, three (3) vane (0.63' x 1.25' 16 x 32 mm, 0.79' x 1.58' [20 x 40 mm], ...
-
PremiumManufactured by AMS, Inc.based in USA
. The blows required to drive the embedded cone a depth of 1 3/4' have been correlated by others to N values derived from the Standard Penetration Test (SPT). Experience has shown effectiveness in pre-augered holes to depths of 15' - 20' (4.6 to 6.1 cm). The cone can be replaced with a plated drive tube assemble for collection of 3' x 10' (7.6 x 25.4 ...
-
PremiumManufactured by AMS, Inc.based in USA
Improve effectiveness of geotechnical testing and sampling with a pre-bored hole. Includes: 5/8' threaded, 2 1/4' regular auger and 2 1/4' 5/8' planer auger, one 4' 5/8' extension, one 3' 5/8' extension, rubber-coated cross handle, black poly-canvas ...
-
PremiumManufactured by AMS, Inc.based in USA
Evaluate the consistency, compaction and bearing of fine grained, soft soils. The static cone penetrometer is used to evaluate the consistency of soils, their level of compaction and the bearing capacity of shallow foundations and pavement subgrades. Specifically developed for use in fine grained soils, particularly soft soils, to depths of 30'. They use a 60 degree vertex angled cone with an ...
-
PremiumManufactured by AMS, Inc.based in USA
Dual Mass DCP Drive ...
-
PremiumManufactured by AMS, Inc.based in USA
The Eijkelkamp soil moisture sensor can be connected to make a one point measurement and record the soil moisture percentage at the measureing point (applying the Frequency Domain technique). The sensor has a measuring range of 5-55 percent and an accuracy of 5 percent. The soil moisture data are stored together with the coordinates and the measured resistance to penetration. The sturdy, ...
-
PremiumManufactured by AMS, Inc.based in USA
The AMS pocket penetrometer provides accurate measurements of the compressive soil strength. This 6-1/4in unit is spring-operated, and it is measures strength in tons/sq. ft. or kg/sq. cm by pushing a 1/4in diameter loading piston into soil to a depth of 0.25in. The end area is 0.05in2. Compressive load is indicated by reading a scale on the piston barrel. A friction ring indicates maximum ...
-
PremiumManufactured by AMS, Inc.based in USA
Easy to use with easy-to-read results: Regular vane (0 to 1 kg/cm²) : For saturated cohesive soils with undrained strength , independent of normal pressure. Large vane (0.2 kg/cm²): use with remolded samples. Small vane (2.5 kg/cm²): for stiffer ...
-
Manufactured by GDS Instruments (A division of Global Digital Systems Ltd)based in UNITED KINGDOM
The GDS Hollow Cylinder Apparatus (HCA) allows for rotational displacement and torque to be applied to a hollow cylindrical specimen of soil. Using this device it is possible to control the magnitude and direction of the three principal stresses. ...
-
Manufactured by GDS Instruments (A division of Global Digital Systems Ltd)based in UNITED KINGDOM
For many years the resonant column apparatus has been used in research and commercial laboratories to estimate values of the shear modulus, G, and damping ratio, D, for soil specimens across the small to medium strain range (< 1 %). The variation in these parameters with increasing strain magnitude allows engineers to conduct dynamic response analyses, such as those using finite element and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you