geotechnical testing equipment

Direct push can be a cost-effective, time saving, and a technically accurate means of drilling, sample collection, and testing. Split-Spoon and Shelby Tube samplers are popular options for geotechnical testing and sampling. This drilling method has been used for over 10 years and, according to the EPA in ...

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from PowerProbes - Application and Tooling Product line

Improve effectiveness of geotechnical testing and sampling with a pre-bored hole. Includes: 5/8' threaded, 2 1/4' regular auger and 2 1/4' 5/8' planer auger, one 4' 5/8' extension, one 3' 5/8' extension, rubber-coated cross handle, black poly-canvas ...

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Hand Tooling - Geotechnical Sampling and Testing Product line

AMS infiltration rings are a simple and relatively inexpensive method for monitoring infiltration rates. They can also be used to study liquid waste disposal, leaching and drainage efficiencies. The rings are centered by the cross handle – which is welded in place at the top of the unit. The rings are inserted into the turf by pushing and twisting on this cross handle. An optional dead blow ...

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Hand Tooling - Geotechnical Sampling and Testing Product line

in the bottom of a pre-augered hole. The blows required to drive the embedded cone a depth of 1 3/4' have been correlated by others to N values derived from the Standard Penetration Test (SPT). Experience has shown effectiveness in pre-augered holes to depths of 15' - 20' (4.6 to 6.1 cm). The cone can be replaced with a ...

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Hand Tooling - Geotechnical Sampling and Testing Product line

Geotester dial penetrometer set is used for on-site measurement of soil compaction by testing the foundation plane or boring samples. It gives readings of estimated unconfined compressive strength in TSF or kg/cm2 when used with the standard 1/4' dia plunger. The geotester is furnished with stainless steel ...

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Hand Tooling - Geotechnical Sampling and Testing Product line

is used both to push the vane to the desired test depth and apply the shearing torque. To correct for the skin friction of the extension rods, a dummy probe replaces the vane and a skin friction test is performed adjacent to the vane test location. Includes: Torque head assembly, six (6) extensions rods, three (3) vane ...

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Hand Tooling - Geotechnical Sampling and Testing Product line

. It is also used for soil remediation, and geotechnical sampling and testing. Many AMS PowerProbe direct push drill rigs also have hollowstem augering capabilities. Compared to conventional drilling, direct push drilling is less labor intensive, offers quicker setup time, and generates less drill cuttings. Direct push ...

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from PowerProbes - Application and Tooling Product line

The Shaw portable core drill is a nearly ideal tool for environmental and geotechnical field investigation because it can be used in otherwise difficult of access locations behind buildings, fences and walls, trees, escarpments and much else. The diamond core bits of the system are easily capable of advancing ...

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Hand Tooling - Geotechnical Sampling and Testing Product line

The penetrologger has been especially developed to measure the resistance to penetration of the soil and to save the measuring results to digitally process them on a computer. The penetrologger is ergonomically designed, and lightweight. It can be used to measure to a depth of 80 cm. The penetrologger can provide the Unified Soil Classification System (USCS), the Vehicle Cone Index (VCI), and ...

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Hand Tooling - Geotechnical Sampling and Testing Product line

Easy to use with easy-to-read results: Regular vane (0 to 1 kg/cm²) : For saturated cohesive soils with undrained strength , independent of normal pressure. Large vane (0.2 kg/cm²): use with remolded samples. Small vane (2.5 kg/cm²): for stiffer ...

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Hand Tooling - Geotechnical Sampling and Testing Product line

Developed by the Army Corps of Engineers, Dynamic Cone Penetrometers (DCPs) provide a low-cost, efficient test method for quickly determining in-situ CBR values of pavement base, subbase and subgrades. They can readily be used for depths up to 30" and up to 6' with optional drive rods and extensions. This ...

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Hand Tooling - Geotechnical Sampling and Testing Product line

The AMS pocket penetrometer provides accurate measurements of the compressive soil strength. This 6-1/4in unit is spring-operated, and it is measures strength in tons/sq. ft. or kg/sq. cm by pushing a 1/4in diameter loading piston into soil to a depth of 0.25in. The end area is 0.05in2. Compressive load is indicated by reading a scale on the piston barrel. A friction ring indicates maximum ...

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Hand Tooling - Geotechnical Sampling and Testing Product line

Evaluate the consistency, compaction and bearing of fine grained, soft soils. The static cone penetrometer is used to evaluate the consistency of soils, their level of compaction and the bearing capacity of shallow foundations and pavement subgrades. Specifically developed for use in fine grained soils, particularly soft soils, to depths of 30'. They use a 60 degree vertex angled cone with an ...

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Hand Tooling - Geotechnical Sampling and Testing Product line

– Novatest design – has been modified to get a higher degree of reliability as far as correlation curves are concerned, obtaining the new SonReb method. To develop new curves, 50 cubic samples (200x200mm) of twenty distinct classes of concrete have been ...

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Hand Tooling - Geotechnical Sampling and Testing Product line

Pask Permeameter Kit; The field saturated hydraulic conductivity (Kfs) or permeability of natural soil and built up beds of fill can be quickly and easily measured in place using the ETC Pask Constant Head Permeameter Kit manufactured by Dynamic Monitors, a business unit of Engineering Technologies Canada Ltd. ...

By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA). from Hand Tooling - Geotechnical Sampling and Testing Product line

Soil sampling equipment for obtaining soil samples at or near the surface in environmental sampling and monitoring and geotechnical testing applications. Our samplers range in length from 18” to 24”, the “Lynac” sampler head has coarse threads which make assembly/disassembly much faster and ...

By N&N Drilling Supply Mfr. based in Jessup, PENNSYLVANIA (USA).

Water wells, soil sampling, geotechnical testing, exploration shot holes & auger drilling The plus means more. More power. More performance. More reliability. The LS200H+ features the same operator-inspired design of the LS200, but includes a more robust hydraulic system and more powerful engine options. Its ...

By Eisen Machinery SA based in Korsten, SOUTH AFRICA.

Blades are hardened. Beams and blades are precision ground. Made from high quality tool steel. Have true right angles inside and outside. Length of blade is measured from inner edge of beam to end of ...

By Hoskin Scientific Limited based in Burnaby, BRITISH COLUMBIA (CANADA). from Geotechnical & Materials Testing - Concrete Product line

Precision ground and nicely finished to rigid standards. Their thickness and design permit them to retain shape and accuracy, yet still portable and easy to handle. No. 380 series are not beveled or graduated, No. 385 series are beveled on one edge but not graduated. 36 and longer are marked with arrows at two suspension ...

By Hoskin Scientific Limited based in Burnaby, BRITISH COLUMBIA (CANADA). from Geotechnical & Materials Testing - Concrete Product line

Compacts asphalt mixture in the compaction mold. Hammer has finger guard at base of sliding weight. Flat circular face is 3.95" (100.3mm) dia.; hammer is 10 lb. (4.54kg.) sliding weight and has a free fall of 18" (457mm). Additional mold and hammer assemblies are recommended for efficient testing operations, ...

By Hoskin Scientific Limited based in Burnaby, BRITISH COLUMBIA (CANADA). from Geotechnical & Materials Testing - Asphalt Product line