Geotextile Separator Equipment
-
Manufactured by FRITZ LANDOLT AGbased in SWITZERLAND
high tensile resistance while maintaining a low surface weight. Specifically engineered for applications necessitating "separation and reinforcement" on building sites, Landogeo™ PP is the ideal solution. Whether faced with challenging construction scenarios or demanding environments, this product excels in delivering superior ...
-
Manufactured by BontexGeo NVbased in BELGIUM
Bontec woven geotextiles offer the perfect cost-effective solution for separation, reinforcement and filtration. Bontec woven geotextiles are manufactured from polypropylene tapes. Bontec SG is used in areas such as access roads and hard standings, roadways, car parks and coastal defence projects. One of its primary uses is in ...
-
Manufactured by BontexGeo NVbased in BELGIUM
for good filtration. The HF (High Flow) range of geotextiles can be used as a filter wrap, an erosion control layer, a filter or separation layer or for load transfer. The geotextile will allow the passage of fluids without the uncontrolled passage of soil, as well as enabling the rapid removal of any excess water through its surface even in ...
-
Manufactured by Propex Operating Company, LLCbased in USA
GEOTEX 180ST is a woven polypropylene geotextile containing heavy woven flat tape yarns produced by Propex, and will meet the following Minimum Average Roll Values (MARV) when tested in accordance with the methods listed below. These characteristics make GEOTEX 180ST ideal for the construction of embankments over soft soils, steepened ...
-
Manufactured by BontexGeo NVbased in BELGIUM
Tipptex BS & NS nonwovens are a range of needle punched and thermally bonded geotextiles that offer the highest levels of engineering performance and quality standards. The thermal treated nonwoven range is used in various applications including site access roads, hard standings, road and railways, drainage blankets and car ...
-
Manufactured by BontexGeo NVbased in BELGIUM
Bontec NW is a range of needle punched and thermally bonded geotextiles that offer the highest levels of engineering performance and quality standards. The NW range is used in various applications including site access roads, hard standings, road and railways, drainage blankets and car parks. The hydraulic properties of Bontec NW ...
-
Manufactured by BontexGeo NVbased in BELGIUM
Bontec SNW are needle punched specially bonded geotextile designed to offer outstanding performance at a lower thickness compared to traditional protection geotextiles. The principal functions of SNW are protection, separation and filtration. Through the optimum combination of polymer and our unique production technology, our SNW product ...
-
Manufactured by Beaulieu Technical Textiles (BTT)based in BELGIUM
Material: Polypropylene. Roll length (m): 200. Tensile strength warp (MD) (kN/m): 21. Tensile strenght weft (CMD) (kN/m): 21. Colour: Black. All geotextiles produced and used in civil engineering & construction applications are CE accredited. A CE labelled product complies with the conformity procedures stipulated in the applicable ...
-
Manufactured by Beaulieu Technical Textiles (BTT)based in BELGIUM
All geotextiles produced and used in civil engineering & construction applications are CE accredited. A CE labelled product complies with the conformity procedures stipulated in the applicable European Directives. Material: Polypropylene. Roll length (m): 100. Tensile strength warp (MD) (kN/m): 16. Tensile strenght weft (CMD) (kN/m): ...
-
Manufactured by Beaulieu Technical Textiles (BTT)based in BELGIUM
All geotextiles produced and used in civil engineering & construction applications are CE accredited. A CE labelled product complies with the conformity procedures stipulated in the applicable European Directives. Material: Polypropylene. Roll length (m): 200. Tensile strength warp (MD) (kN/m): 16. Tensile strenght weft (CMD) (kN/m): ...
-
Manufactured by GEI Works, LLCbased in USA
Woven Geotextile for Stabilization and Separation. The W 200 Woven Geotextile separates and stabilizes soil. When placed between two mediums, it permanently prevents mixing. As it reinforces the soil , the quality of the soil is improved and it increases structural ...
-
Manufactured by Industrial Fabrics, Inc.based in USA
geotextiles to tolerate installation and construction forces. Similar to woven geotextiles, separation/stabilization is a primary function along with cushion/protection, filtration/drainage and demarcation. ...
-
Manufactured by GEI Works, LLCbased in USA
Woven geotextile for stabilisation and separation. Geotextiles woven fabric's primary functions include stabilisation and separation. When placed between two mediums, it permanently prevents the mixing of those two materials. The soil quality is improved, which increases structural ...
-
Manufactured by GEI Works, LLCbased in USA
Woven geotextile for stabilization and separation. The main functions of geotextile W250 is to separate and stabilize soil. It permanently prevents mixing when placed between two mediums. Why is this important? As the fabric reinforces the soil, it improves the soil quality and increases structural ...
-
Manufactured by Aquatan Lining Systemsbased in SOUTH AFRICA
The HI-DRAIN is a durable, heat formed multiple-cuspated synthetic sheet which, depending on the application, may be installed on its own or in conjunction with a geotextile filter separator layer which is bonded to or loosely laid over the Hi-DRAIN to form a drainage core. This geotextile which is applied can either be of a woven or ...
-
Manufactured by GEI Works, LLCbased in USA
Civil nonwoven geotextile for separation and underlayment. Erosion Control material effectively separates two layers of soil that have differing physical properties (grain size distribution, consistency, density) and prevents fine particles under stress from migrating. This compacts the soil creating a stable environment for vegetation ...
-
Manufactured by GEI Works, LLCbased in USA
Woven geotextile for stabilization and separation. Woven geo textiles primary functions are to separate and stabilize soil. They permanently prevent the mixing of two materials, like soft sand and stone. As they reinforce the ground, soil quality is improved, which increases structural ...
-
Manufactured by Tele Textiles ASbased in LATVIA
TeleVev woven polyester geotextiles are for soil reinforcement and separation. Our geotextiles are made of high tenacity multifilament polyester yarn.Tele Textiles offers a wide range of TeleVev® with high strength at low ...
-
Manufactured by Hanes Companies, Inc., a Division of Leggett & Plattbased in USA
TerraTex® High Performance Stabilization Geotextiles (HPG) provide enhanced separation, filtration, and reinforcement functions for a wide range of soil conditions. The unique construction allows for high permittivity in wet subgrade conditions as well as increased frictional interaction with roadway base aggregate. TerraTex® ...
-
Manufactured by Carthage Millsbased in USA
Carthage Mills’ FX® Series of woven slit film geotextiles offers immediate and cost effective solutions for most separation and many stabilization applications. By providing and maintaining separation of the aggregate and subgrade soils, the system life of both paved and unpaved roadways is extended significantly. In unpaved ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you