grease testing Equipment in Europe

Model BS EN 1825 - Tested Grease Separators

Lamina Filtertraps are highly efficient grease separators, tested to BS EN 1825, particularly suitable for sensitive locations i.e. when a sewage treatment plant or septic tank is used. There are two different ranges to choose from depending on the installation position ...

By Progressive Product Developments Ltd based in Southampton, UNITED KINGDOM.

Rtec - Fretting Wear Tester Module

Fretting wear tester module is used across wide applications ranging from materials, lubricant, grease, coating etc. testing. The state of the art fretting module has industry leading specifications on stroke and frequency. Controlled stroke from 5 micron at 500 hZ frequency across a wide temperature range ...

By Rtec Instruments Distributor in Groot-Ammers, NETHERLANDS.

AWAS - Model Galaxie 1902 / 2002 - Vortex Oil Water Separator

Oil-Water separation acc. to the vortex principle for industrial effluents with oil and grease. (successfully tested and type approved ac. To EN858 class I with less than 5 ppm residual oil) AWAS offers for the first time a flexible solution to suit individual applications - non clogging - no coalescence ...

By AWAS International GmbH based in Wilnsdorf, GERMANY. from Oil Water Separators Product line

Dennison - Tri-Axle Bulk Blower

greasing system installed fully resprayed early 2013. trailer fully tested until september 2014, roll over cover in good condition, trailer work ready, very ...

By Ballytrain Plant & Commercials Sales Ltd based in Co. Monaghan, IRELAND. from Trucks & Trailers Product line

Whittaker - Turret Bearings

FPSO turret bearings present a number of known and predictable problems which can result in serious damage to bearing pistes, including bearing pads becoming detached in bad weather, ineffective greasing and oil leaks. At Whittaker we’ve developed proven, tested solutions to all these design ...

By Whittaker Engineering based in Stonehaven, UNITED KINGDOM. from Marine- Turret Maintenance Product line

Hinowa - Model 14.72 IIIS - Lightlift Aerial Platforms

Lightlift 14.72 IIIS is an innovative, compact and light tracked aerial platform. Created to simplify as much as possible the use of the machine by the operator, making life easier for the hirer. Weighting only 1380 kg it can be transported with a B driving licence, it is increasingly becoming the category reference machine on the Italian ...

By Hinowa S.p.A. based in Nogara (VR), ITALY. from Aerial Platforms Product line

MiniTest - Model FFK - Grease Testers

MINITEST FFK automatically determines the flow-pressure properties of lubricating grease at low temperatures down to -60°C by means of the Kesternich test. The original and time-consuming method is now fully automated and the measuring range is extended far below the original one, resulting in a ...

By Grabner Instruments Messtechnik GmbH based in Wien, AUSTRIA. from Viscosity Product line

Solvay Solexis Fomblin Y-Vac3 - Fomblin PFPE Greases

FomblinY-VAC 3 is a homogeneous white grease particularly suitable for use as a lubricant of mechanical parts operating at high vacuum and in contact with aggressive chemicals or oxygen. Fomblin Y-VAC 3 is used in 'lubricating for life' applications; its lubricating preperties make it suitable for parts ...

By Kurt J. Lesker Company Office in East Sussex, UNITED KINGDOM. from Vacuum Fluids & Greases Product line

Boulden Krytox - Soot Blowers

Soot blowers remove the accumulated ash and particles from boiler tubes to keep a boiler running efficiently and cleanly. This is a tough environment for a lubricant with high operating temperatures. Hydrocarbon lubricants in the gearbox can oxidize, leading to high maintenance ...

By Boulden Company Office in Ellange, LUXEMBOURG.

Dressta - Model TD-25 - All-Round Heavy Dozer

The Dressta TD-25 Series is the first of our heavy-duty crawler dozer range, starting with a net flywheel power of 375 hp (280 kW) and an operating weight of 41.5t. The machines are built to excel in heavy mining, coal and construction projects, incorporating advanced technologies and components for optimal ...

By Liugong Dressta Machinery sp. z o.o. based in Stalowa Wola, POLAND. from Crawler Dozers Product line

Latchways - Freestanding Constant Force Post System

The ManSafe Freestanding Constant Force post provides assured worker safety at height where there is an occasional or temporary requirement to access flat roofs or ...

By Latchways PLC based in Devizes, UNITED KINGDOM. from ManSafe for Roofing Product line

Big Dipper - Model W-250-IS-SS - Sealed-Stainless Automatic Grease Removal Device

The Big Dipper W-250-IS-SS Sealed-Stainless Automatic Grease Removal Device is rated to the PDI-G 101, and ASME A112.14.3 and A112.14.4 standards and is capable of accepting up to a 25 GPM (1.58 l/s) flow while holding more than 56.4 Pounds (25.6 Kg) of grease. The center module which comes with digital time ...

By Big Dipper—Thermaco Distributor in Wickhamford, UNITED KINGDOM. from Sealed-Stainless Models Product line

FLEXSIL - Silicone Membranes

FLEXSIL membranes have been successfully used in municipal and industrial wastewater treatment facilities for more than 15 years. Their wide-ranging chemical resistance, superior to that of other membrane materials, provides the basis for extremely long service life and outstanding performance. We will be happy to provide information and technical support in selection of the most cost-efficient ...

By OTT System GmbH & Co. based in Langenhagen, GERMANY. from Membranes Product line

PCS - High Frequency Reciprocating Rig Machine (HFRR)

friction measurements of engine oils, greases and other compounds. It has become the industry standard test for diesel fuel lubricity and conforms to ASTM D6079, ASTM D7688, CEC F-06-A, ISO 12156, EN 590, JPI-5S-50 and IP ...

By PCS Instruments based in London, UNITED KINGDOM. from Instruments Product line

Big Dipper - Model W-200-IS - Automatic Grease Removal Device

The Big Dipper W-200-IS Automatic Grease Removal Device is rated to the PDI-G 101, and ASME A112.14.3 and A112.14.4 standards and is capable of accepting up to a 20 GPM (1.26 l/s) flow while holding more than 40 lbs. (18.14 kg) of grease. The center module which comes with digital time control, heater ...

By Big Dipper—Thermaco Distributor in Wickhamford, UNITED KINGDOM. from Big Dipper Internal Strainer Series Product line

Big Dipper - Model W-250-IS - Automatic Grease Removal Device

The Big Dipper W-250-IS Automatic Grease Removal Device is rated to the PDI-G 101, and ASME A112.14.3 and A112.14.4 standards and is capable of accepting up to a 25 GPM (1.58 l/s) flow while holding more than 50 lbs. (22.68 kg) of grease. The center module which comes with digital time control, heater ...

By Big Dipper—Thermaco Distributor in Wickhamford, UNITED KINGDOM. from Big Dipper Internal Strainer Series Product line

ANALEX - Model fdM plus - Ferrous Debris Monitors

The ANALEX fdMplus is a highly accurate yet rugged magnetometer designed to measure the wear metal particle contamination of an oil or grease sample. It can be used to measure un-combined ferrous wear metal particle debris in oil or grease samples taken from a variety of types of machinery and provides a ...

By Kittiwake - Parker Hannifin Corp based in Littlehampton, UNITED KINGDOM. from Wear Metal Product line

Oil Mop Skimmer

Tried and tested - Oil Mop Skimmers are an effective system for a series of applications. We are pleased to work with the leading manufacturer of Oil Mop Skimmers to provide system that are effective in the following applications: Food manufacturing - cooked meats, sauces, bread, dairy, beverages and other fats, ...

By Smart Storm Ltd. based in Bangor, UNITED KINGDOM. from Fats, Oils and Grease Remediation Product line

Bray - Model Series 20/21 - Resilient Seated Butterfly Valve

The Series 20/21 resilient seated butterfly valve surpasses the high standards required in sanitary valve applications, and inherent flow characteristics and capabilities. Bray's Series 20 valve is a wafer version with flange locating holes, and the Series 21 is the companion lug version for dead-end service and other flange requirements. Sanitary & Chemical applications. One-piece disc/stem. ...

By Bray International, Inc. Office in Voiron, FRANCE.

Model TA series - Grease Fat Separators

The purpose of grease separators is to treat wastewater from grease and fat, or provide drainage pretreatment. Grease separators are installed in facilities where grease and fat concentration has already reached 10 mg/l. These are kitchens with high intensity cooking and dish-washing, starting from 10 customers a ...

By Ekostandarts Tehnologijas based in Ķekavas, LATVIA.

Subscribe to our eBulletins