Green Waste Equipment Available In Latin America
-
Manufactured by Zhengzhou Hengyang Industry Co.. Ltdbased in CHINA
Recycling is one of the key approaches found in any type of green waste management disposal program. Many cities and towns participate in recycling programs that allow sanitation workers to collect items such as newspapers and other paper products, glass, and plastic as part of the routine trash removal. Like almost all green methods of ...
-
Manufactured by Peruzzo Srlbased in ITALY
Chipper/Shredder mod. T5 and T5 with belt conveyer is a sturdy machine used to reduce green waste for professional needs. It uses a chipping disk to reduce branches up to 10 cm of diameter and a shredding hammer group for smaller branches up to 3 cm of diameter. Available T5 model with ground or high discharge. (Production up to 12 ...
-
Manufactured by Komptech GmbHbased in AUSTRIA
The Crambo is one of the best machines for shredding all types of wood and green cuttings. Two slow-running drums with shredding tools minimize fine particle and noise/dust emissions, and resist contraries. The particle size is configurable by simply exchanging screen baskets. The Crambo is powered by a modern Caterpillar engine. The ...
-
Manufactured by Komptech GmbHbased in AUSTRIA
The stationary Crambo dual-shaft shredder shreds all types of wood and green waste, to a set particle size. Slow-running screws with shredding tools minimize fine particle and noise/dust emissions, and build up resistance to contamination. The particle size is adjustable by simply exchanging screen baskets. A new engine compartment with ...
-
Manufactured by Komptech GmbHbased in AUSTRIA
The stationary Crambo dircet shreds all types of wood and green waste to a set particle size. Slow-running screws with shredding tools minimize fine particle and noise/dust emissions, and build up resistance to contamination. The particle size is adjustable by simply exchanging screen baskets. The drive train of the Crambo direct ...
-
Manufactured by Komptech GmbHbased in AUSTRIA
The Crambo direct is one of the best machines for shredding all types of wood and green cuttings. Two slow-running drums with shredding tools minimize fine particle and noise/dust emissions, and resist contraries. The particle size is configurable by simply exchanging screen baskets. The drive train of the Crambo direct combines the ...
-
Manufactured by Huayin Renewable Energy Equipment Co., Ltdbased in CHINA
Waste oil can be refined into valuable diesel oil through catalytic cracking and high temperature distillation technology. It is a method of separating mixtures based on differences in volatilities of components in a boiling liquid mixture. After distilled by the distillation plant, the oil may have dark color with bad smell, then we ...
-
Manufactured by Afacan Plasticbased in TURKEY
A Form Zero Waste Bins 50 LT Original Green (Glass Waste); PRODUCT CODE: SAO-50 111. Barcode number: 8692843001959. Brand: A Form. Category: Zero Waste Bins, Zero Waste Bins 50 LT ...
-
Manufactured by Geco GmbHbased in GERMANY
and its low wear. The existing drive therefore also operates the feeding wheel. From an inlet at approximately 500- 600mm below ground level waste concrete and wash- and rain/ cleaning water from the yard can be lifted into the washing trough of the FLOTMAT. ...
-
Manufactured by Geco GmbHbased in GERMANY
, level sensors are added to the system according to the specific lay out conditions. This leads to a reliable and economic recycling plant with a capacity of 1 or 3 m³/h solids specially developed for the precast and concrete paver industry. Waste concrete can be fed into the trough from the front or from the left / right hand ...
-
Manufactured by Geco GmbHbased in GERMANY
Rugged, wear resistant concrete reclaimer for the ready mixed concrete industry. Based on the principle of counter current a separation between aggregates (0,2 – 32mm) and grey water (mixture of water, cement and fines < 0,2mm) is achieved. Both components can be reused for concrete production. Supplementary equipment such as pumps, agitators, level sensors are added to the system ...
-
Manufactured by Commercial Zone, by DCI-Artformbased in USA
; x 5” openings provide ideal access for recyclables. 42-gallon waste capacity, uses 45-gallon trash bags. Ships in two cartons. 1-year Warranty. Made in ...
-
PremiumManufactured by Harp Renewables Limitedbased in IRELAND
other organic waste such as food, agricultural & horticultural biomass, green waste, cardboard, etc., reducing mass and volume by up to 80% in just 24 hours – without creating carbon dioxide, ammonia, or methane emissions, and thus resulting in an innovative, carbon negative, organic waste remediation ...
-
PremiumManufactured by Enerpat Groupbased in CHINA
type and application. MSB-E Series Two Shafts Shredders are widely used in the volumetric reduction of various waste products, including but not restricted to the following. Light Scrap Metals,Bulky Waste,Wood Waste,Plastic Waste,Cardboard waste,Textiles Waste,Domestic Rubbish & Electronic ...
-
PremiumManufactured by Enerpat Groupbased in CHINA
four shaft shredders, or name it quad shredders, are perfectly suitable for scrap size reduction applications such as e-waste, rubber tire recycling, RDF production, and contaminated materials where uniformed medium particle size is desired. The four shaft shredders are very robust and built to sustain tough operating conditions without ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
The Pronar MRW 2.75g Slow-Speed Shredder is an industrial machine tailored to companies that need compact equiptment. There are multiple easy to replace shafts available for this shredder, specializing it for a array of materials. Shredding is accomplished by its two shafts running simultaneously, giving it the power to destroy many material. The shredder runs on a Volvo 7.7L 285HP (210 kW) Stage ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
The MPT 30/1g belt conveyor is the largest conveyor model 3R offers allowing customers to build stock piles up to 42-feet high! The 98-foot belt and 500 t/hour throughput set this stockpiler apart from the rest. Thanks to the well-thought-out design and the use of a 2.8 CAT engine (55 kW / 73HP at 2500 rpm), it is possible to move up to 500 tons of material per hour. Radio control is a standard ...
-
PremiumManufactured by ENVEAbased in FRANCE
The last generation of Cairsens micro-sensors for Particulate Matters (PM) monitoring operates without any influence from moisture in ambient air. They measure PM1 and PM10 concentrations, with increased precision for PM2.5. The Cairsens allows a year of continuous maintenance-free operation, even in highly polluted and humid atmospheres. Thanks to its robust and miniature design, it is fully ...
-
PremiumManufactured by Enerpat Groupbased in CHINA
type and application. MSB-E Series Two Shafts Shredders are widely used in the volumetric reduction of various waste products, including but not restricted to the following. Light Scrap Metals,Bulky Waste,Wood Waste,Plastic Waste,Cardboard waste,Textiles Waste,Domestic Rubbish & Electronic ...
-
PremiumDistributed by 3R-Machinery (by Shred-Tech)based in USA
engineers to process bulk materials, which include plastics, wood, textiles, organic waste, medical waste, electronic equipment, and more. The blades within the shredder bite through and rip apart the products, rendering them into a uniform particle size in a single pass. It works in an efficient and timely manner, getting more done so that you can do ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you