Only show results in Michigan? Ok

grit scraper equipment

  • Premium

    ASTIM - Model KUM - Travelling Grit Grease Scraper

    Travelling Grit Scrapers for single, twin or triple type basins manufactured as full wall, half Wall, steel profile or truss beam according to static calculations and requirements. The system consists of a travelling gantry over the channel which carries the grit and grease removal systems. Bridge is mounted on end carriages at both sides which ...

    By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Grit Treatment Product line

  • Premium

    VA Teknik - Grit Trap Scraper

    VA Teknik’s grit trap scrapers are based on the same principal as our well-known plastic chain & flight scrapers, which have been on the market for over 40 years. We have successfully installed chain & flight scrapers in aerated grit traps using our plastic chain and stainless steel scraper flights. Besides excellent corrosion ...

    By Hydria Water AB based in Borås, SWEDEN. from Sludge Scrapers Product line

  • Premium

    ENTA - Model Rectangular Type - Grit Bridge Scraper

    Rectangular type grit chambers are used extensively in wastewater treatment systems as aerobic and anaerobic. In order to remove the solids which are settled at the bottom of this kind grit chambers, there is used scraper systems. By the scrapers which move two-way through the grit chamber, the grits are pushed to the drain at the bottom of canal ...

    By ENTA Treatment Systems Engineering Contracting LTD based in Seyrantepe-Sarıyer, TURKEY. from Screens Product line

  • Premium

    VA Teknik - Plastic Chain Operation Sludge Scrapers

    The maintenance of sludge scrapers is various depending on configuration and type. The main activities when completing maintenance of these mechanical machines are the transmission chain tensioning and greasing. The previous generations of scrapers are mostly of steel chain type configurations which need a lot of greasing, often there is oil ...

    By Hydria Water AB based in Borås, SWEDEN. from Sludge Scrapers Product line

  • Premium

    ENTA - Linear Bridge Scraper

    Linear scrapers which are used in rectangular basins, mostly preferredas grit and oil chamber at pre-treatment plant. It is possible to make different groups for linear scrapers as circular ones. Energy feeding can be done by a cable drum or with cable trolley. Removal of the sludge settled at the bottom, shall be done by an air-lift system and ...

    By ENTA Treatment Systems Engineering Contracting LTD based in Seyrantepe-Sarıyer, TURKEY. from Scrapers & Thickeners Product line

  • Premium

    WesTech - Bottom Sludge Scraper

    The ZICKERT Shark™ Bottom Sludge Scraper has over 3,000 installations all over the world, 90 percent of which are retrofits. It is designed for continuous sludge transport and performs well in all sedimentation processes, including grit chambers.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Clarification Product line

  • Premium

    VA-Teknik - Plastic Chain Scraper

    VA Teknik’s plastic chain scraper is a proven product that has been on the market for more than 40 years. With thousands of installations from North to South and east to west in all corners of the world VA Teknik possesses extensive expertise. We offer you reliability and consistency with our well-engineered chain scrapers. A solid ...

    By Hydria Water AB based in Borås, SWEDEN. from Sludge Scrapers Product line

  • Grit Scraper

    Grit Scraper's main aim is to remove the settled grit deposited at the bottom of grit chamber. They operate along a surface with an attached bridge sweeping across the bottom of the tank and also could be operated along with a skimmer fort he scum at the top layer of the wastewater. Scraper moves linearly along the length with guide wheels ...

    By Yeditepe Aritim based in İstanbul, TURKEY. from Equipments Product line

  • Grit Classifier

    Grit present in the wastewater needs to be held and separated at the inlet, without which it will quickly cause the mechanical equipment and pumps in the plant to deteriorate. Grit classifiers are designed to separate the solids in the grit and water mixture collected by grit scrapers, and they consist of a tank with a conical bottom and a screw ...

    By Arsimak Aritma Sistemleri based in Çayırova, TURKEY.

  • Grit Classifier

    Grit present in the wastewater needs to be held and separated at the inlet, without which it will quickly cause the mechanical equipment and pumps in the plant to deteriorate. Grit classifiers are designed to separate the solids in the grit and water mixture collected by grit scrapers, and they consist of a tank with a conical bottom and a screw ...

    By SISMAT ULUSLARARASI LTD. STI. based in KOCAELI, TURKEY. from General Treatment Equipment Product line

  • Passavant - Single or Double Longitudinal Grit Chamber Scraper Bridge and Oil Separator

    Single or double longitudinal grit chamber scraper bridge and oil separatora for coarse materials interception channel width: 400÷4.000 mm.

    By Passavant Impianti Spa based in Novate Milanese (MI), ITALY. from Water Treatment Product line

  • Passavant - Grit Chamber Scrapers

    The Passavant Grit Chamber Scrapers is a robust and reliable scraper for the removal of grit sediments and floating scum (such as oil and grease) from longitudinal grit and grease chambers.

    By Aqseptence Group GmbH based in Aarbergen, GERMANY. from Passavant Product line

  • Bottom Scrapers and Floating Scum Scrapers

    PROBIG is the specialist when it comes to developing high-quality specialist solutions that precisely meet the needs of the customer - from high-performance chains to chain scrapers for grit collection, floating scum scrapers with modular outlets, and much more.

    By Probig GmbH based in Vöcklamarkt, AUSTRIA.

  • Detritors Shallow Circular Ponds

    Detritors are shallow circular ponds used in pretreatment plants with the purpose of grit removal. Another scraper of chain or blade type is utilised in an adjacent channel into which the collected grit is transferred.

    By SISMAT ULUSLARARASI LTD. STI. based in KOCAELI, TURKEY. from Scrapers Product line

  • Model TBS - Traveling Bridge

    Model TBS is designed as cross-tank traveling bridge collector suitable for long rectangular tank.  The tank can be as long as 100 meter, and designed for both grit scraper and sludge - siphoning purposes.  The bridge can be designed lightweight employing cable pull as movement mechanism, or heavy duty by self-driven using gear motor to ...

    By Association of 3 Co., Ltd. based in Bangkhuntien, THAILAND. from Wastewater Equipment Product line

  • Longitudinal Bridge Scraper

    Longitudinal Bridge scrapers are designed for desludging and descuming of primary and final settling tanks and can be used as Grit chamber scrapers, sludge scrapers in the treatment plants.

    By Mena Water based in Kandel, GERMANY. from Pre-Treatment - Primary Clarifier Product line

  • ProTechtor - Circular Grit Collectors

    Kusters Water Circular Detritus Tank, Grit Collectors are available in sizes ranging from 8 ft to 40 ft in diameter. The grit collectors utilize scraper arms that are designed to move the settled grit to the exterior of the basin where it is then discharged to a grit classifier or grit washer. Standard flow capacity ranges from 1.0 – 64 mgd ...

    By Kusters Water, a division of Zima Corporation based in Spartanburg, SOUTH CAROLINA (USA). from Headworks Product line

  • Mass Aritma - Model MAN 3010 - Grit Bridge Scrapers

    Rectangular tanks are commonly used for sand removal in wastewater treatment plants as in aerated and non-aerated systems. A scraper bridge is used to removal sand, which settles to the tank.

  • Yield - Floor Scraper & Grit Discharge System

    Sinking contaminants and grit that get fed into the digesters along with the feedstock will sink to the floor of the digester throughout the digestion cycle. If left there, this accumulated grit will create significant operation problems including reduced digester capacity & therefore biogas production and interference with agitators. The ...

    By CH Four Biogas Inc. based in Ottawa, ONTARIO (CANADA).

  • Tuke & Bell - Crossflow Grit Detritor

    Influent first enters the collection tank through baffles to slow down the flow and assist grit settlement. The tank is capable of handling a wide range of flow variation. A rotary scraping mechanism, driven from the centre of the tank, moves settled grit through a discharge point located at the side of the collection tank. From here the grit is ...

    By Tuke & Bell Ltd based in Wednesbury, UNITED KINGDOM. from Grit Extraction Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you