Only show results available in Massachusetts? Ok

grit screw classifier equipment

  • Premium

    WesTech - Shafted Grit Screw Classifier

    The Shafted Grit Screw Classifier is a grit conveying and dewatering unit which typically receives grit slurry from a Vortex Grit Separator, an Aerated Grit Chamber, or a Grit Collector. The Shafted Grit Screw Classifier settling tank is designed to effectively separate and settle the grit from the water.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Headworks Grit Removal Product line

  • Premium

    ENTA - Screw Grit Classifier

    Grit classifiers are used for pressing, dewatering and decreasing the volume of the wastes which are collected by the screens. Thus, this make easy the transportation of the wastes and gains savings. This needs less maintenance by its simple design, strong body structure, pressing screw durable to detrition, bearing system that meets all loads and ...

    By ENTA Treatment Systems Engineering Contracting LTD based in Seyrantepe-Sarıyer, TURKEY. from Screens Product line

  • Premium

    Ovivo - Grit Collector

    Wastewater facilities that receive flows containing grit can be significantly impacted on operating costs, down time, maintenance resources, and can lead to unnecessary maintenance tasks, and in some cases, issues with permit compliance. The Ovivo Grit Collector is a cross flow grit system that utilizes a collector arm to move settled grit into a ...

    By Ovivo USA LLC based in Salt Lake City, UTAH (USA). from Municipal Wastewater - Inlet Works Product line

  • Premium

    Hydroflux COANDA - Model RoSF 3 - Grit Classifier

    A further step ahead with our COANDA Grit Classifier RoSF3. The COANDA Grit Classifier was developed by HUBER in cooperation with the University of Munich, hydraulics department. Based on the Coanda Effect, the flow into the tank can be defined exactly and simulated mathematically. When operating at optimum flow,the grit separation is up to 98 % ...

    By Hydroflux Pty Ltd based in Sydney, AUSTRALIA. from Hydroflux epco - HUBER Technology - Screens Product line

  • Premium

    ENTA - Recprotating Rake Classifier

    The rake classifier consists of reciprocating rake mechanism set in an inclined channel alongside the grit collection basin. The smooth agigation of grit caused by the low speed motion of the rake mechanism provides a perfect environment for the settled grits to liberate putrescible organics, leaving clean grit for discharge and reduced odour ...

    By ENTA Treatment Systems Engineering Contracting LTD based in Seyrantepe-Sarıyer, TURKEY. from Screens Product line

  • Premium

    Ovivo Jones+Attwood - Screw Classifier

    The J+A screw classifier systems are free-standing units used for the separation of mineral grit from other types of solids. The screw classifier hopper maintains a water level through a series of weirs. A peripheral weir removes floating solids and a second weir positioned within the trough wall removes other solids that are lighter than grit. A ...

    By Ovivo USA LLC based in Salt Lake City, UTAH (USA). from Municipal Wastewater - Inlet Works Product line

  • Premium

    Hydroflux Epco - Vortex Grit Removal

    Grit separation from wastewater helps prevent operational problems such as grit sedimentation, increased wear and blockages. The HUBER Votmax Grit removal system is designed for concrete vortex trap installation with capacities up to 4000L/s.  HRSF is also a vortex trap but is a free standing stainless steel tank suitable for smaller ...

    By Hydroflux Pty Ltd based in Sydney, AUSTRALIA. from Hydroflux epco - HUBER Technology - Screens Product line

  • Premium

    Jones+Attwood Crossflow - Grit Removal System

    The J+A Crossflow™ grit removal unit is typically installed between medium and fine screens to capture abrasive material. It features a wide and shallow square collection tank with a series of vertical baffles to assist in the equal distribution of the flow entering the tank. This design forms a recessed circular sump. Solids accumulate ...

    By Ovivo USA LLC based in Salt Lake City, UTAH (USA). from Municipal Wastewater - Inlet Works Product line

  • Premium

    Etaniv - Screens and Headworks

    Pre-Treatment refers to all the machines needed for the screening of course particles in order to leave only degradable substances for a proceeding treatment process.

    By Etaniv B.Y ltd based in Bazra, ISRAEL.

  • WTP - Grit Classifiers

    Grit Classifiers in shafted or shaftless screw design available in a wide range of sizes and capacities with or without cyclone concentrators – final grit removal processing stage where grit is settled from a feed slurry, concentrated, washed and dewatered prior to discharge.

    By WTP Equipment Corp. based in Brampton, ONTARIO (CANADA).

  • ProTechtor - Grit Classifiers

    Kusters Water Grit Classifiers utilize carefully sized settling hoppers to provide accurate surface settling rates. The hopper is attached to a discharge screw assembly to remove the settled and washed grit. Classifiers are available in both single and dual designs and can be fitted with cyclone separators and designed with a retractable lower ...

    By Kusters Water, a division of Zima Corporation based in Spartanburg, SOUTH CAROLINA (USA). from Headworks Product line

  • Dutch Spiral - Vertical Shaftless Screw Conveying

    Spiral conveyors are developed and designed for efficient and effective transportation of a variety of materials such as wet, stringy or sticky materials. The main advantage of installing spiral conveyors is having maximum reliability and minimal maintenance.Spirals have no shaft and this prevents material built up. Our fully sealed lids minimize ...

    By Dutch Spiral B.V. based in Groot-Ammers, NETHERLANDS. from Sludge Product line

  • Binder+Co Jiggers - Dewatering Screws

    Binder+Co supplements its product range in the wet processing of building materials by attrition machinery and sieve jiggers. Attrition machinery is used for dissolving loamy lumps and cleaning sand. Binder+Co provides sieve jiggers to separate light materials (e.g. wood) from grit.   Binder+Co supplies dewatering screws and spiral ...

    By Binder Co based in Gleisdorf, AUSTRIA. from Binder+Co Wet Processing Product line

  • Model HRSF - Circular Grit Trap

    Separation of the grit particles in the HUBER Circular Grit Trap HRSF is supported by the rotational motion of the wastewater. The separation effect is generated by overlapping of the vertical downward motion and a developing centrifugal force acting on the individual grit particles. The inner tank surface serves as the separation area.

    By Huber SE based in Berching, GERMANY. from Grit Separation and Treatment- Circular Grit Traps Product line

  • ProTechtor - Headworks Complete Plants

    The Kusters Water HCP unit provides a total headworks solution for small and large facilities. The raw influent flow undergoes a series of pre-treatment processes including: Fine Screening, grit collection, grease collection and conveying.

    By Kusters Water, a division of Zima Corporation based in Spartanburg, SOUTH CAROLINA (USA). from Headworks Product line

  • ML Grit Classifier

    An effective classifier of the screw type which is manufactured in five standard sizes and is used for automatic removal of grit from grit traps or other sedimented particles with relative high sedimentation velocity.The design is made of stainless steel and is completely enclosed. Sand Classifier consists of a steel tank for the separation of ...

    By ML Spirals based in Toronto, ONTARIO (CANADA). from Grit Separation Product line

  • Grit Removal - Pista Traps

    The Lektratek crossflow grit extractor mechanism is ideal for the removal of grit from sewage entering the treatment works and has been designed on both the retention and constant velocity principle. Sewage entering the hopper-bottomed tank is kept at a constant velocity by rag free paddles rotating in the same direction. Prior to removal of sand, ...

    By Lektratek Water Technology based in PotchIndustria, SOUTH AFRICA.

  • Coarse Solid Separation EquipmentsManual & Mechanical Screens

    Geo miller make Manual & Mechanical Bar Screens are highly efficient to separate coarse floating/ submerged waste materials from effluent. We manufacture the coarse & fine screens based on clear spacing between bar flats. Mechanical screens consist of mechanically motorized rake mechanism to clean bar and transfer it through chute to electrically ...

    By Geo Miller & Co. Pvt. Ltd. based in New Delhi, INDIA.

  • FSM - Model KSF-L - Compact Plant

    The FSM compact unit type KSF-L combines high efficiency with a very small space requirement. Type KSF-L is designed for flow rates of 100 l/s and higher. For an inlet flow of 100 l/s the required area (without classifier screw) is 11.5 m². The plants are designed in fixed sizes. A tank length of 1 m corresponds to a flow of 20 l/s. ...

    By FSM Frankenberger GmbH & Co. KG based in Pohlheim, GERMANY. from Compact Unit Product line

  • Screenings & Grit Handling Systems

    Claro offers proven screenings and grit removal, treatment, and outloading systems.

    By Claro Inc based in Montreal, QUEBEC (CANADA). from Solids/Sludge Handling Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you