Only show results available in Connecticut? Ok

grit separation equipment

  • Premium

    Hydroflux COANDA - Model RoSF 3 - Grit Classifier

    A further step ahead with our COANDA Grit Classifier RoSF3. The COANDA Grit Classifier was developed by HUBER in cooperation with the University of Munich, hydraulics department. Based on the Coanda Effect, the flow into the tank can be defined exactly and simulated mathematically. When operating at optimum flow,the grit separation is up to 98 % ...

    By Hydroflux Pty Ltd based in Sydney, AUSTRALIA. from Hydroflux epco - HUBER Technology - Screens Product line

  • Premium

    Hydroflux Epco - Vortex Grit Removal

    Grit separation from wastewater helps prevent operational problems such as grit sedimentation, increased wear and blockages. The HUBER Votmax Grit removal system is designed for concrete vortex trap installation with capacities up to 4000L/s.  HRSF is also a vortex trap but is a free standing stainless steel tank suitable for smaller ...

    By Hydroflux Pty Ltd based in Sydney, AUSTRALIA. from Hydroflux epco - HUBER Technology - Screens Product line

  • Premium

    Hydroflux - High Efficiency Longitudinal Grit Traps with Grit Removal Screw

    The grit trap design and layout is fully compliant with international standards. As a pre-packaged, free standing system, civil requirements and reduced. The horizontal grit conveyor transports the separated grit particles to the inclined grit removal screw installed within the grit trap. The inclined screw dewaters and discharges the compacted ...

    By Hydroflux Pty Ltd based in Sydney, AUSTRALIA. from Hydroflux epco - HUBER Technology - Screens Product line

  • Premium

    WesTech - Shafted Grit Screw Classifier

    The Shafted Grit Screw Classifier is a grit conveying and dewatering unit which typically receives grit slurry from a Vortex Grit Separator, an Aerated Grit Chamber, or a Grit Collector. The Shafted Grit Screw Classifier settling tank is designed to effectively separate and settle the grit from the water.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Headworks Grit Removal Product line

  • Premium

    WesTech - Gritt Mitt™ Grit Classifier

    The Gritt Mitt™ Classifier is a grit conveying and dewatering unit which typically receives a grit slurry from either a Vortex Grit Separator or an Aerated Grit Chamber. The Gritt Mitt settling tank is designed to effectively separate and settle the grit from the water. As the grit is conveyed out of the settling tank it is lightly washed, ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Headworks Grit Removal Product line

  • Premium

    ASTIM - Model AGS - Grit Classifier System

    Grit Separators remove precipitates and heavy matter in municipal and industrial clarification plants by an inclined rotating shaft-less spiral. Turbulence is avoided by special construction of the hopper. ASTiM Grit Separator “AGS” which does not have any under water bearing reduces maintenance while offering increased grit removal ...

    By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Grit Treatment Product line

  • Premium

    ENTA ENTADT - Grit Separator

    The ENTADT grit separator is used at the raw inlet and should be positioned downstream of the sewage screens. These screens will have medium fine spaces .Where two stage screening is applied ENTADT system can be installed after the medium spaced screen thus offering protection to the fine thus screening mechanism from abrasive detritus.

    By ENTA Treatment Systems Engineering Contracting LTD based in Seyrantepe-Sarıyer, TURKEY. from Screens Product line

  • Premium

    ASTIM - Model AGW - Grit Washer-Separator

    Grit Washer-Separator is a compact unit which is combining grit classifying and grit washing processes in a single tank with a small foot print. It is mainly consisting of an inlet structure, a conical tank where grit is settled and washed, an agitator mixer and an inclined spiral classifier. The special developed helical inlet structure guides ...

    By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Grit Treatment Product line

  • Premium

    Grittec - Grit Classifier

    Grittec is The Grit Classifier that will separate rock, sand and grit from the screened wastewater. Thanks to a large surface tank, materials will settle down at the bottom where a shaftless screw will convey them before releasing them into a dumpster.

    By Aqualitec Corp. based in Los Angeles, CALIFORNIA (USA). from Screening Equipment Product line

  • Premium

    Ovivo Jones+Attwood - Screw Classifier

    The J+A screw classifier systems are free-standing units used for the separation of mineral grit from other types of solids. The screw classifier hopper maintains a water level through a series of weirs. A peripheral weir removes floating solids and a second weir positioned within the trough wall removes other solids that are lighter than grit. A ...

    By Ovivo USA LLC based in Salt Lake City, UTAH (USA). from Municipal Wastewater - Inlet Works Product line

  • Premium

    Intereco - Sand Trap System

    INTERECO produce sand classifiers to separate sand/grit from sewage; complete by an air-lift. The unit is installed in a concrete circular tank, completed by a diametral support bridge. It is composed by: Drive unit completed of gear mechanical speed variator. Thrust roller bearing to support shaft and mixer. Lower plastic bearing.

    By Intereco S.a.s based in Scalenghe (TO), ITALY. from WWTP Pre-Treatment Product line

  • Premium

    Ovivo - Grit Collector

    Wastewater facilities that receive flows containing grit can be significantly impacted on operating costs, down time, maintenance resources, and can lead to unnecessary maintenance tasks, and in some cases, issues with permit compliance. The Ovivo Grit Collector is a cross flow grit system that utilizes a collector arm to move settled grit into a ...

    By Ovivo USA LLC based in Salt Lake City, UTAH (USA). from Municipal Wastewater - Inlet Works Product line

  • Premium

    Hydroflux HUBER - Model RoSF4 - Grit Washing Plant

    The HUBER RoSF4 Grit Washing Plant is the highest performing grit washing and dewatering system in the world with over 1500 installations worldwide. The COANDA Grit Washing Plant combines grit classifying and grit washing in a single and compact unit. With installations in most Australian capital cities including Australia’s largest Grit ...

    By Hydroflux Pty Ltd based in Sydney, AUSTRALIA. from Hydroflux epco - HUBER Technology - Screens Product line

  • Premium

    Jones+Attwood Crossflow - Grit Removal System

    The J+A Crossflow™ grit removal unit is typically installed between medium and fine screens to capture abrasive material. It features a wide and shallow square collection tank with a series of vertical baffles to assist in the equal distribution of the flow entering the tank. This design forms a recessed circular sump. Solids accumulate ...

    By Ovivo USA LLC based in Salt Lake City, UTAH (USA). from Municipal Wastewater - Inlet Works Product line

  • Premium

    MyTEE - Grit Screening Vault

    A required screen device prior to the AMS Zone for a MyFAST system, the MyTEE screen provides separation of non-biological solids and grit. Use the MyTEE Screening Device for any pre-screening and grit removal application replacing bar screens in large-flow wastewater treatment plants.

  • Premium

    J+A Jeta - Grit Trap

    Grit removal is a prerequisite of wastewater treatment. It prevents buildup in process chambers, and erosion of equipment in the primary treatment works. The J+A Jeta® grit trap is a high performance, compact grit removal unit. With its sloping sides and specially designed impeller, it provides maximum separation of heavy mineral solids (grit) ...

    By Ovivo USA LLC based in Salt Lake City, UTAH (USA). from Municipal Wastewater - Inlet Works Product line

  • Model KD 01 - Grit Separator

    The grit separator model KD 01 is available in five sizes with a separating capacity from 5 to 35 litres per minute. The grit separator is constructed in stainless steel and after machining completely pickled. By this, the optimal durability of the material is ensured. The grit separator is of a simple and robust construction and works at a low ...

    By Danish Wastewater Equipment A/S (DWE) based in Vejle, DENMARK. from Pre-Treatment -Sand/Grease Product line

  • Grit Separators

    The grit separator is a machine suitable for separation of sand and sediment present in the sewage drain. The sewage enters the settling tank, the sand and solids are deposited on the bottom where a screw pushes them up on the outlet. In the upper part of the settling tank, the liquid free of sand, is downloaded from the machinery through a weir. ...

    By C.M. Sterluti s.r.l. based in San Pietro Vecchio (VI), ITALY. from Products Product line

  • Yield - Grit Separator

    Using gravity, the Fitec grit separator enables the grit fraction, collected by the Scraping system, to settle out of the slurry. The grit-free supernatant is discharged through a weir back into the digester. Subsequently a discharge screw conveyor pumps the sand to a discharge opening.

    By CH Four Biogas Inc. based in Ottawa, ONTARIO (CANADA).

  • Model PP - Grit Washers

    The grit washer is designed for intensive grit washing and the removal of organic matters in grit. Grit washer is placed at a further stage after the grit separator. By intensive grit washing mostly all residual portion of organic substances are removed. The hydro-mixture in the grit chamber is first pumped into the grit separator. Here the ...

    By Fontana R, s.r.o. based in Brno, CZECH REPUBLIC. from Separation and Washing of Grit Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you