Only show results available in Virginia? Ok

ground water flow modelling equipment

  • Hydrasep - Model RCTOC - Oil Water Separators

    RCTOC models are mainly suitable for oil recovery flow process water, process wastewater treatment, ground water remediation, or where oil concentrations are high.

    By Hydrasep, Inc. based in Hernando, MISSISSIPPI (USA). from Oil Water Separators Product line

  • EcoSorp - Below Ground Emulsified and Dissolved Oil Water Separators

    The EcoSorp oil water separator is for use to obtain below 1 part per million (PPM) separation efficiencies. It is for use with free or PHYSICALLY EMULSIFIED AND DISSOLVED OIL by adsorption from water. This represents exceptionally clean separation. The EcoSorp is the only model we carry that requires filter / coalescing media cartridge ...

    By Freytech Inc. based in Miami, FLORIDA (USA). from Below Ground Emulsified and Dissolved Oil Water Separators Product line

  • Model B–5 - Bailey Valve

    The Bailey Valve Model B-5 sleeve valve has been designed to incorporate features that provide superior valve performance for inline flow control and pressure reduction applications. Typical applications for the model B-5 are water treatment plant flow control, pump control, tank level control, metering vaults, reservoir discharge and ground water ...

    By Municipal Treatment Equipment & Municipal Valve, LLC based in Golden, COLORADO (USA).

  • PANEL - Model XL - Enhanced Coalescing Oil Water Separator

    Enhanced coalescing oil water separator for large oily water flow rates : PANEL XL. Depending on the model selected, each individual panel can handle flow rates of either 320 gallons per minute (GPM) or 640 GPM. Achieves below 5 parts per million (PPM) separation of free non-emulsified oil (below 10 PPM for many types of light crude oil). By far, ...

    By Freytech Inc. based in Miami, FLORIDA (USA). from Enhanced Coalescing Oil Water Separator Product line

  • Model B-5 - Bailey Valve

    The Bailey Valve Model B-5 sleeve valve has been designed to incorporate features that provide superior valve performance for inline flow control and pressure reduction applications. Typical applications for the model B-5 are water treatment plant flow control, pump control, tank level control, metering vaults, reservoir discharge and ground water ...

    By Hennesy Equipment Sales Co based in Phoenix, ARIZONA (USA).

  • Epiphany - Model ERM3000 - Mist Evaporator

    Epiphany's ERM3000 Mist Evaporator uses a state-of-the-art method for evaporating fresh water to the air with zero residual fallout.  Epiphany's proprietary design is based on extensive fluid dynamics modeling to achieve optimal droplet size, flow ratios, and evaporation rates.  Unlike other evaporators on the market, ...

    By Epiphany Water Systems based in Pittsburgh, PENNSYLVANIA (USA).

  • Aluminum Manhole Shield

    All Aluminum Fabrication. Weighs 24 LBS. Pneumatic seal keeps ground water from flowing into the open manholes. Just Inflate Tube with 5-10 lbs. of Air or Nitrogen to form a Water-Tight Seal. No Clamps or Sealing Compounds required. Series 2730 (reversible 27' & 30') fits most . Communications Manhole Openings. Model 3336 (33' & 36') fits ...

    By Nutmeg Utility Products, Inc. based in Cheshire, CONNECTICUT (USA). from Aluminum Manhole Shield Product line

  • Aqua Solutions - Model 2618S1 - Reagent Grade DI Systems

    The system has a flow rate of 5-Liters/minute and includes two DI tanks (one installed plus one spare), an activated carbon prefilter assembly with pressure regulator and gauge, and a 2-Megohm-cm purity monitor. The monitor has a Green LED to indicate that the system is producing >2 megohm-cm Type II water. When the water quality drops below 2 ...

    By Aqua Solutions, Inc. based in Jasper, GEORGIA (US) (USA). from Reagent Grade DI Systems Product line

  • Model WP200-275 - Wellpoint Pumps

    The ACME Dynamics (8') wellpoint pump model WP200-275 will handle up to 275 ACFM of air while pumping flows to 1,950 GPM, heads to 160 TDH, and is capable of handling up to 2' diameter solids. The unique design of the air-water separator tank separates air and ground water mixtures through centrifugal force, and has virtually no moving parts ...

    By ACME Dynamics, Inc. based in Plant City, FLORIDA (USA). from Wellpoint Pumps Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you